Replaced my factory Gauges!

6MT-Z34 · 10-21-2014, 06:34 PM

Nice! Love the new gauges

Gregor12 · 10-21-2014, 06:44 PM

Quote:

Originally Posted by 6MT-Z34

Nice! Love the new gauges

thank ya sir

Aviator44 · 10-22-2014, 12:24 AM

Quote:

Originally Posted by 370zrider

Is that an Air/Fuel gauge (with 7.4) ?

The Innovate defaults to 7.4 on start up, there's a lose connection, or the sensor is not plugged in. Mine reads 7.4 for a minute or so in the mornings when I first turn the car on.

Quote:

Originally Posted by chops

how come you went with an AFR gauge? going FI? btw, we have factory wideband sensors iirc if you tap into ODB

The factory wideband sensors are not as quick or accurate as aftermarket. If you want to just hook up an OBD on an N/A car then there's really no harm. If going FI, you don't use them.

Gregor12 · 10-22-2014, 01:24 AM

Quote:

Originally Posted by Aviator44

The Innovate defaults to 7.4 on start up, there's a lose connection, or the sensor is not plugged in. Mine reads 7.4 for a minute or so in the mornings when I first turn the car on.

The factory wideband sensors are not as quick or accurate as aftermarket. If you want to just hook up an OBD on an N/A car then there's really no harm. If going FI, you don't use them.

Yessir. The sensor was not in at the time. The gauge flashes at 7.4 while it warms the sensor up and then it will begin to read once it is ready!

Gregor12 · 11-09-2014, 06:24 PM

well guys updated the thread… will add more pictures of everything soon

Gregor12 · 11-10-2014, 10:20 PM

Added switches today along with the new JVC radio
switch 1 - 12v switch for gauges
switch 2 - dvd by pass for in dash
switch 3 - remote wire for sub amp
These switches will be used for more important stuff in the future lol

Zerocool · 11-10-2014, 11:10 PM

What kind of radio is it? You could have just grounded the parking brake wire or a relay instead of a switch

Gregor12 · 11-11-2014, 12:35 AM

Quote:

Originally Posted by Zerocool

What kind of radio is it? You could have just grounded the parking brake wire or a relay instead of a switch

Lol you know I thought the same thing. However the jvc picks up that it's the common ground. I had my kenwood connected to the common ground previously but this radio wouldn't do that

Mbreese · 11-30-2014, 11:22 PM

Just curious were u got the switches from ?

Gregor12 · 12-02-2014, 02:31 AM

Quote:

Originally Posted by Mbreese

Just curious were u got the switches from ?

no problem man. wiringproducts.com is the site

ZeeingAround · 12-02-2014, 08:06 AM

There appears to be a metal support bracket for the gauges and dash that goes back
to the firewall. Did you reuse this?

Gregor12 · 12-02-2014, 04:04 PM

Quote:

Originally Posted by ZeeingAround

There appears to be a metal support bracket for the gauges and dash that goes back
to the firewall. Did you reuse this?

it has a bolt on the back side I believe. i didn’t reuse it i made some mounts using random things from lowes. ill be finishing the install next week because i had to switch up the way i wired them since i wasn’t exactly happy lol ill be posting more pictures

Phil

taroslush · 12-04-2014, 03:15 AM

no such thing as nbpt its BSP or NPT

Gregor12 · 12-06-2014, 06:30 PM

Quote:

Originally Posted by taroslush

no such thing as nbpt its BSP or NPT

I Meant to put bspt. thanks for pointing that out

LAVA · 12-12-2014, 09:29 PM

Quote:

Originally Posted by Gregor12

no problem man. wiringproducts.com is the site

Do you have a link for the actual ones you ordered?
Thx

11-10-2014, 11:10 PM	#22 (permalink)
Zerocool Track Member Join Date: Mar 2014 Location: N.Y Posts: 548 Drives: '09 370z Rep Power: 15	What kind of radio is it? You could have just grounded the parking brake wire or a relay instead of a switch __________________ I like pizza

12-02-2014, 08:06 AM	#26 (permalink)
ZeeingAround A True Z Fanatic Join Date: Dec 2010 Location: Michigan Posts: 6,365 Drives: 3500 NVP 370Z-sold! Rep Power: 86624	There appears to be a metal support bracket for the gauges and dash that goes back to the firewall. Did you reuse this? __________________ Get some roosters for eggs and Bulls for milk . Then you will see that gender matters. Especially at milking time.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What gets replaced with new transmission?	Cmike2780	Engine & Drivetrain	14	08-16-2015 10:55 PM
CSC needs to be replaced again anything else i should do?	luigi90210	Engine & Drivetrain	10	02-08-2014 06:17 PM
Replaced Radio	phillip2010Z	Exterior & Interior	4	04-01-2012 06:46 PM
replaced odometer	Volcom370Z	Exterior & Interior	37	04-02-2010 11:51 AM
Replaced tires on SUV and...	PapoZalsa	The Lounge (Off Topic)	3	12-22-2009 11:16 AM

10-21-2014, 06:34 PM	#16 (permalink)
6MT-Z34 A True Z Fanatic Join Date: Jan 2013 Location: NJ Posts: 1,726 Drives: PW Z Rep Power: 15	Nice! Love the new gauges

11-09-2014, 06:24 PM	#20 (permalink)
Gregor12 Enthusiast Member Join Date: Oct 2013 Location: CHARLOTTE, NC Posts: 433 Drives: 2012 370z 6mt sport Rep Power: 12	well guys updated the thread… will add more pictures of everything soon

11-10-2014, 10:20 PM	#21 (permalink)
Gregor12 Enthusiast Member Join Date: Oct 2013 Location: CHARLOTTE, NC Posts: 433 Drives: 2012 370z 6mt sport Rep Power: 12	Added switches today along with the new JVC radio switch 1 - 12v switch for gauges switch 2 - dvd by pass for in dash switch 3 - remote wire for sub amp These switches will be used for more important stuff in the future lol

11-30-2014, 11:22 PM	#24 (permalink)
Mbreese Enthusiast Member Join Date: Dec 2012 Location: Cartersville,Ga Posts: 331 Drives: Metalic-Gray,09 370Z Rep Power: 32	Just curious were u got the switches from ?

12-04-2014, 03:15 AM	#28 (permalink)
taroslush Base Member Join Date: Sep 2014 Location: Taro land Posts: 10 Drives: slushy taro Rep Power: 11	no such thing as nbpt its BSP or NPT