Help with Hood & Fender dimensions for CLEAR BRA

Holliday · 10-02-2009, 10:18 AM

Ok, I need some help. I ordered my 370z already but I need to order a clear bra before it comes in. I am going to cover the hood and fenders completely so I need the dimensions so I can get some material ordered. If anyone could help me out I would greatly appreciate it!

I just need the Hood dimensions and the dimensions of the fron t fenders.

THANKS IN ADVANCE!

Holliday · 10-03-2009, 11:37 AM

can anybody help? PLEASE?

dad · 10-03-2009, 12:42 PM

I would call these guys a Aero Tech.
Southern California Clear Bra Installer

Holliday · 10-03-2009, 02:53 PM

I just need the dimensions of the entire hood and fenders. I am going to buy a bulk roll to cover the entire hood and front fenders. I am going to buy a pre-cut front bumper and grille though. If someone could just copy my image and fill it in with the length and width maybe? I used paint to produce this.

THANKS GUYS!

kdoske · 10-03-2009, 06:34 PM

if you are going to buy a bulk roll then why even bother with the measurements. You will have enough to do two vehicles. Just find out the overall width of the vehicle and order a roll around that width.

Holliday · 10-04-2009, 02:21 AM

Yes, I understand. I don't have my car yet to measure. The bulk rolls come in different lengths. That is why I need to know these measurements so I get the right width.

Holliday · 10-05-2009, 02:02 PM

help please

bluzman · 10-05-2009, 02:40 PM

Quote:

Originally Posted by Holliday

help please

Since no one else seems to be willing to walk out to the garage and do this, here ya' go. Remember that these dimensions are approximate - made with a plain old tape measure - although an effort was made to account for the curvature of the parts.

LOL Since the old adage that no good deed goes unpunished is validated time after time, I'm sure that now someone will flame this effort for not being completely accurate.

Holliday · 10-05-2009, 02:47 PM

THANKS FOR YOUR HELP!

If anybody else wants to get some measurements to confirm, please don't hesitate! Thanks!

HTP AutoWorks · 10-06-2009, 06:17 AM

You are going to need 58" VentureShield for the job. If you dont have prior experience installing film I do not recomend you go this route. Bulking panels is not very easy and you can be out a lot of money very quickly. Why not get the full hood and fenders precut??? There are a few companies out there that precut the full hood/fenders kits and it would make the install much easier... even though I still do not recommend doing it yourself. I am just giving you my perspective as an installer.

If that what you want to try then check out StickerCity.com They have the full kits and their prices are very good.

Holliday · 10-06-2009, 11:46 AM

I have only been able to find one place with pre cut hood and fenders and they want way to much. Stickercity only has pre cut headlight kits. I would rather find precut but I have not been able to find anyone online that offer the whole hood and fenders for a good price. I have worked with window tint and vinyl a lot. I have done some research and I don't see what would be hard about installation? Do you have any pointers or tips?

kenchan · 10-06-2009, 12:33 PM

you check here?

Auto Paint Guard Home

Holliday · 10-06-2009, 12:56 PM

No, that is alot better price. I am kinda leaning towards VentureShield though. I have heard a lot of people having 3M yellow. Plus VentureShield has alifetime warranty.

Thanks for the help. If anyone knows other places that have precut VentureShield please let me know.

kenchan · 10-06-2009, 02:01 PM

np. the guy there 'Ryan' he's pretty good. he's helped me in the past for clearbra and the headlamp clearbra's.

on my car it was 6yrs old but did not yellow.

Holliday · 10-06-2009, 02:11 PM

That's awesome. Was it on a white car? Did you have problems with dirt buildup at the seam?

10-02-2009, 10:18 AM	#1 (permalink)
Holliday Track Member Join Date: Aug 2009 Location: Cache, OK Age: 38 Posts: 916 Drives: in the fast lane.... Rep Power: 17	Help with Hood & Fender dimensions for CLEAR BRA Ok, I need some help. I ordered my 370z already but I need to order a clear bra before it comes in. I am going to cover the hood and fenders completely so I need the dimensions so I can get some material ordered. If anyone could help me out I would greatly appreciate it! I just need the Hood dimensions and the dimensions of the fron t fenders. THANKS IN ADVANCE! __________________

10-03-2009, 11:37 AM	#2 (permalink)
Holliday Track Member Join Date: Aug 2009 Location: Cache, OK Age: 38 Posts: 916 Drives: in the fast lane.... Rep Power: 17	? can anybody help? PLEASE? __________________

10-03-2009, 12:42 PM	#3 (permalink)
dad Grand Prix of Endurance Join Date: Nov 2008 Location: Tennessee Posts: 3,476 Drives: Mulsanne Straight Rep Power: 26	I would call these guys a Aero Tech. Southern California Clear Bra Installer __________________ We can do without any article of luxury we have never had; but once obtained, it is not in human nature to surrender it voluntary.

10-03-2009, 02:53 PM	#4 (permalink)
Holliday Track Member Join Date: Aug 2009 Location: Cache, OK Age: 38 Posts: 916 Drives: in the fast lane.... Rep Power: 17	. I just need the dimensions of the entire hood and fenders. I am going to buy a bulk roll to cover the entire hood and front fenders. I am going to buy a pre-cut front bumper and grille though. If someone could just copy my image and fill it in with the length and width maybe? I used paint to produce this. THANKS GUYS! __________________

10-04-2009, 02:21 AM	#6 (permalink)
Holliday Track Member Join Date: Aug 2009 Location: Cache, OK Age: 38 Posts: 916 Drives: in the fast lane.... Rep Power: 17	Yes Yes, I understand. I don't have my car yet to measure. The bulk rolls come in different lengths. That is why I need to know these measurements so I get the right width. __________________

10-03-2009, 06:34 PM	#5 (permalink)
kdoske Track Member Join Date: Jul 2009 Location: Louisiana Posts: 541 Drives: 800whp Unicorn FI Z Rep Power: 17	if you are going to buy a bulk roll then why even bother with the measurements. You will have enough to do two vehicles. Just find out the overall width of the vehicle and order a roll around that width.

10-05-2009, 02:02 PM	#7 (permalink)
Holliday Track Member Join Date: Aug 2009 Location: Cache, OK Age: 38 Posts: 916 Drives: in the fast lane.... Rep Power: 17	Help please! help please __________________

10-05-2009, 02:47 PM	#9 (permalink)
Holliday Track Member Join Date: Aug 2009 Location: Cache, OK Age: 38 Posts: 916 Drives: in the fast lane.... Rep Power: 17	Woo Whoo! THANKS FOR YOUR HELP! If anybody else wants to get some measurements to confirm, please don't hesitate! Thanks! __________________

10-06-2009, 06:17 AM	#10 (permalink)
HTP AutoWorks Banned Join Date: Jan 2009 Location: DFW Posts: 124 Drives: G35, Jeep SRT-8 Rep Power: 0	You are going to need 58" VentureShield for the job. If you dont have prior experience installing film I do not recomend you go this route. Bulking panels is not very easy and you can be out a lot of money very quickly. Why not get the full hood and fenders precut??? There are a few companies out there that precut the full hood/fenders kits and it would make the install much easier... even though I still do not recommend doing it yourself. I am just giving you my perspective as an installer. If that what you want to try then check out StickerCity.com They have the full kits and their prices are very good.

10-06-2009, 11:46 AM	#11 (permalink)
Holliday Track Member Join Date: Aug 2009 Location: Cache, OK Age: 38 Posts: 916 Drives: in the fast lane.... Rep Power: 17	Thanks I have only been able to find one place with pre cut hood and fenders and they want way to much. Stickercity only has pre cut headlight kits. I would rather find precut but I have not been able to find anyone online that offer the whole hood and fenders for a good price. I have worked with window tint and vinyl a lot. I have done some research and I don't see what would be hard about installation? Do you have any pointers or tips? __________________

10-06-2009, 12:33 PM	#12 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	you check here? Auto Paint Guard Home

10-06-2009, 12:56 PM	#13 (permalink)
Holliday Track Member Join Date: Aug 2009 Location: Cache, OK Age: 38 Posts: 916 Drives: in the fast lane.... Rep Power: 17	Thanks No, that is alot better price. I am kinda leaning towards VentureShield though. I have heard a lot of people having 3M yellow. Plus VentureShield has alifetime warranty. Thanks for the help. If anyone knows other places that have precut VentureShield please let me know. __________________

10-06-2009, 02:01 PM	#14 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	np. the guy there 'Ryan' he's pretty good. he's helped me in the past for clearbra and the headlamp clearbra's. on my car it was 6yrs old but did not yellow. Last edited by kenchan; 10-06-2009 at 02:04 PM.

10-06-2009, 02:11 PM	#15 (permalink)
Holliday Track Member Join Date: Aug 2009 Location: Cache, OK Age: 38 Posts: 916 Drives: in the fast lane.... Rep Power: 17	cool That's awesome. Was it on a white car? Did you have problems with dirt buildup at the seam? __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nissan 370z Raised Hood Kit / Hood Spacer Kit	Mak	Exterior & Interior	39	12-20-2020 11:24 AM
front wheel fender clips	spearfish25	Exterior & Interior	12	04-01-2012 08:11 PM
Fender Coating to reduce noise	Minicobra1	Nissan 370Z General Discussions	44	02-13-2011 09:12 PM
Clear Bra: Hood, Bumber, or Both?	matt2112	Nissan 370Z General Discussions	14	06-27-2009 06:28 PM
VQ37VHR Engine Dimensions	roddyalan	Engine & Drivetrain	0	05-06-2009 04:04 AM