EVO-R 370Z Rear Diffuser

MB370Z

thought I was getting the new version only reason why I placed the order but its cool

kenchan

Yah, as long as the ends match the length of the bumper's valance lines no issue. just use 3M tape to mount the top and bottom, then use 4 screws to secure the bottom to the bumper. Don't over tighten cause it will crack the CF resin.

MB370Z

ok f*ck that! now I'm pissed off. Not only did EVOR sent me the old version when I place the order for the new one. The fitment is horrible. The lines did not match so I tried stretching and bending it. NOPE! still jacked up and now I have some scratches on my rear diffuser. Hey thanks EVOR!

antennahead

I hate that for you, this is why I refused to order this piece from him. I will eventually get the "other" diffuser members here have tried that has a perfect fitment.

__________________
Time is a companion, who goes with us on the journey, and reminds us to cherish every moment............ because it will never come again

MB370Z

only reason why I ordered was because EVOR states the new version is lighter and easier to install. Problem was I WAS SENT THE OLD VERSION! I didn't want to deal with returns being that this POS is coming from Taiwan. I'm done, time go beat my meat and let off some stress before I break something.

antennahead

I hear ya man, mail order sux sometimes

__________________
Time is a companion, who goes with us on the journey, and reminds us to cherish every moment............ because it will never come again

kenchan

MB- have him send you a RMA, get full credit INCLUDING return freight. in the mean time, dispute to paypal and if you used a credit card, dispute it.

then order up the fujimura diffuser from here:
japanparts.com : PARTS DATABASE

GL!

EVOR

Just saw this post. Been really busy. I did sent you the new version. If you look at the rear reverse side esction it is not full covered. It is not double side covered. Please email me photo of problem. I'll take care of this ASAP. You don't need to use those 3 screws. 3M double side should work fine.

__________________
WWW.EVO-R.NET

AK370Z

BUMP for any new installs with the new version.

__________________
The370Z Signature Pictures ll Want to rock our forum decals on your car? Then click here! ll How to Embed YouTube Videos In a Post
STOP! (Hammertime) ll Become a Premium Member Click HERE ll F.A.Q.
Are You a Nissan Dealer? Click Here to Become A "Supporting Dealer" and Start Listing Your 370Zs In Our Inventory Section
My Monterey Blue Z ll My Exhaust --> My Intake --> G3
Nissan's Official Response Regarding Oil Temp Issue: CLICK HERE
Need a Set of Cheap Winter wheels /Tires? Then Visit The Banner Link Below and Place Your Order. You'll Help Keep The370Z Alive.

kenchan

someone with a yellow Z had one installed and had the same pre-bats fix jordo's vinyl peeping paint look around the fog lamp...

98intrigue

Mine is on order. I'll be sure to post up when I get it. Hoping the fitment is a little better than whats been posted. I had an authentic NISMO diffuser for my G35 and the replicas fit better than mine. I'm hoping this is the case for the Evo-R diffuser.

__________________

kenchan

yah, test fit it and check the peeking paint from around the fog lamp.

i would e-tape that area (unless you're sure you wont be removing it, then just paint using high gloss black) before applying the diffuser and it should be fine.

98intrigue

Good thing I have the 40th...if any paint is peeking through, it will be hard to differentiate and the diffuser. I just wish they would make a diffuser that covered the damn fog lamp, haha.

__________________

toxik

Anyone had any luck with the new Rear Diffuser?

Really don't want to pay $170 shipping to get the one from Japan.

__________________
Project Pearl Necklace - PW 370z 05/01/2010 - 07/06/2011 (sold)

kenchan

yah, like i mentioned, someone with a yellow Z has the EvoR rear diffuser and the fitment is much better.... except for around the fog lamp. but that can be easily fixed using the approaches i noted above.