EVO-R 370Z Rear Diffuser

antennahead · 05-02-2010, 08:17 PM

Quote:

Originally Posted by 370Z JT

there is a gap because you didn't apply enough pressure on both sides, or because the diffuser is short?

Tony said his is short................ no matter how much pressure they applied, couldn't get it to cover the last 1/4 inch on either side.

ZPirate · 05-02-2010, 09:25 PM

Quote:

Originally Posted by antennahead

Tony (2theextreme) has the same issue with his CF diffuser, and I think his "gap" is a little bigger than yours. I am a perfectionist, this bothers me. It's as if the mold was a little too narrow or something. They need to fix this issue so the fit looks custom. Just my opinion, otherwise it looks great!

In my case it's not the mold. The diffuser appears to be the exact size it needs to be. The problem with mine was that the diffuser wasn't curved enough on both ends to fit without putting pressure on it to hold it in place. The mistake I made was not getting someone to hold the diffuser in place while I drilled the pilot holes. I was trying to hold it in place with one hand while I drilled with the other hand. Also the spring clamps I was using to hold the diffuser in place were not strong enough by themselves to hold the ends in place either.

I could have redrilled the pilot holes, but I didn't want to risk putting more holes in the bottom of the bumper. Plus the end gaps on mine are pretty small and near the bottom. I'm probably going to use a little clear silicone to fill them in later.

ZPirate · 05-02-2010, 09:27 PM

Quote:

Originally Posted by antennahead

Tony said his is short................ no matter how much pressure they applied, couldn't get it to cover the last 1/4 inch on either side.

Mine was not too short. It just wasn't curved enough on the ends to fit without pressure on the ends.

EVOR · 05-02-2010, 09:47 PM

Quote:

Originally Posted by ZPirate

Mine was not too short. It just wasn't curved enough on the ends to fit without pressure on the ends.

This is why I suggested to use screws on reverse side of the bumper. It will hold and pull more. But not everyone wants screw holes on their bumper. If you think you will keep this for good then I would suggest use the screws.
BTW, the more I look at this rear. The more I think to make the CF rear license plate cover.

NewYorkJon34 · 05-02-2010, 10:39 PM

It's pretty disapointing that so many people are having fitment issues. Is there anyone here that has actually installed this without a tiny gap?

Rasengan · 05-02-2010, 11:47 PM

i just ordered mine and am planning on keeping it there for good so i will use the screws...i'll let you guys know how it goes in terms of fitment but it seems from zpirate's post, they are the exact size they need to be, you really just have to use the screws to get it to adhere correctly to the bumper

Majestik · 05-03-2010, 05:23 AM

Today I took my CF Rear Diffuser from Evor-R to my panel shop and was shocked at the fitment issues I'm going to have.
Basically, the amount of force required to fit the piece to the left/right curvature of the car is ridiculous..
I will be bringing it back to the shop to attempt an install next week and I will post the details.
Fingers crossed...

VinZ · 05-21-2010, 08:42 AM

Any updates on the fit of this diffuser? I love the look of it but I'm hesitant to get one because of the fitment issues. Dose anyone have any closeup pics of the gaps?

JB-370z · 05-21-2010, 10:00 AM

updates?

Majestik · 05-21-2010, 06:13 PM

Quote:

Originally Posted by JB-370z

updates?

Gimme a few days. We've got a cruise tomorrow and I'll get someone with a pro camera to take some snaps.

The fitment is a lot better than I thought but it took a lot for screws to hold.

There's still a gap on the left and right edges and underneath the corners but I've disguised it the best I can with chrome stripping.

Pics up in a few days. My apologies as my phone camera sux.

simota1 · 05-21-2010, 06:19 PM

if you use the 4 threaded holes in the back of the diffuser.... itll fit and align perfectly... rather than the screws alone... only problem is doing the layout for drilling the holes is kinda hard... i actually made tabs on my rear bumper so there was play room and i could center it...

Majestik · 05-21-2010, 11:00 PM

Quote:

Originally Posted by simota1

if you use the 4 threaded holes in the back of the diffuser.... itll fit and align perfectly... rather than the screws alone... only problem is doing the layout for drilling the holes is kinda hard... i actually made tabs on my rear bumper so there was play room and i could center it...

I actually got mine professionally fitted by the panel shop that's looked after the last 5 of my cars.

I am unsure how flexible the non-cf diffuser is but I can tell you now that my cf is extremely difficult to bend..

370Z JT · 05-21-2010, 11:41 PM

Quote:

Originally Posted by Majestik

I actually got mine professionally fitted by the panel shop that's looked after the last 5 of my cars.

I am unsure how flexible the non-cf diffuser is but I can tell you now that my cf is extremely difficult to bend..

Did they follow EVOR's detailed instructions on how to install? I'm assuming they removed the bumper from the car as well?

simota1 · 05-22-2010, 01:19 AM

Quote:

Originally Posted by Majestik

I actually got mine professionally fitted by the panel shop that's looked after the last 5 of my cars.

I am unsure how flexible the non-cf diffuser is but I can tell you now that my cf is extremely difficult to bend..

the non cf diffuser is difficult to bend as well.... in fact lol it doesnt bend well... u could actually crack it like the carbon.... using the self tap screws alone and double stick tape wont do the job.... the non cf version are hallow so u only have a thin layer of fiber glass to screw it on too... which isnt that good... the self taps wont have enough meat on them and could actually pull them selves off.... btw man... im not trying to offend you or sound like a know it all.. im just saying..... for other peoples reference who install them

Majestik · 05-22-2010, 05:55 AM

Quote:

Originally Posted by simota1

the non cf diffuser is difficult to bend as well.... in fact lol it doesnt bend well... u could actually crack it like the carbon.... using the self tap screws alone and double stick tape wont do the job.... the non cf version are hallow so u only have a thin layer of fiber glass to screw it on too... which isnt that good... the self taps wont have enough meat on them and could actually pull them selves off.... btw man... im not trying to offend you or sound like a know it all.. im just saying..... for other peoples reference who install them

Dont be silly Simota1. Your status as a good guy on this forum is legendary!

I wouldn't think you were offending me even if you were...

Also, no I didn't follow the instructions. The panel shop just did whatever was required to hold it.

05-02-2010, 11:47 PM	#246 (permalink)
Rasengan Base Member Join Date: Jan 2010 Location: Chicago Age: 47 Posts: 128 Drives: '10 Roadster T/S 6MT Rep Power: 15	i just ordered mine and am planning on keeping it there for good so i will use the screws...i'll let you guys know how it goes in terms of fitment but it seems from zpirate's post, they are the exact size they need to be, you really just have to use the screws to get it to adhere correctly to the bumper __________________ 2010 Platinum Graphite 370Z Roadster 6MT Touring/Sport

05-03-2010, 05:23 AM	#247 (permalink)
Majestik Track Member Join Date: Aug 2009 Location: SE Melbourne, Australia Posts: 800 Drives: '13 Jet Black R35GTR Rep Power: 17	Today I took my CF Rear Diffuser from Evor-R to my panel shop and was shocked at the fitment issues I'm going to have. Basically, the amount of force required to fit the piece to the left/right curvature of the car is ridiculous.. I will be bringing it back to the shop to attempt an install next week and I will post the details. Fingers crossed... __________________ 2009 Black 370Z AT7 \| 2010 Satin Black MT6 www.Zclub.com.au - where the Aussie 'Z' Action is at CF AMUSE VESTITO \| FAST INTENTIONS \| STILLEN \| K&N \| EIBACH \| NISMO \| FORMULA1 Also '13 R35GTR Jet Black

05-21-2010, 10:00 AM	#249 (permalink)
JB-370z A True Z Fanatic Join Date: Apr 2009 Location: Houston, Tx Posts: 1,859 Drives: Stage 2 Twin Turbos Rep Power: 19	updates? __________________ ll Baker Tuning ll GTM ll Powerhouse Amuse ll HKS ll Up-Rev ll iForged ll AP Racing ll Pioneer ll SPL ll Bride ll Top Secret ll OS Giken ll GTM Stage 2 Twin Turboed 370z (First in Texas, Thanks To Baker Tuning)

05-21-2010, 06:19 PM	#251 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	if you use the 4 threaded holes in the back of the diffuser.... itll fit and align perfectly... rather than the screws alone... only problem is doing the layout for drilling the holes is kinda hard... i actually made tabs on my rear bumper so there was play room and i could center it... __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Oil change, Jack stands or ramps with diffuser?	spearfish25	Nissan 370Z General Discussions	31	08-10-2010 09:38 PM
Name this rear diffuser!	JoeD	Exterior & Interior	13	05-22-2010 08:45 PM
rear diffuser	jrmlk	Exterior & Interior	5	08-20-2009 10:58 PM
k40 calibre laser diffuser and detector.	dahbour	The Lounge (Off Topic)	2	08-17-2009 04:16 PM
Rear Diffuser 370Z	355890	Exterior & Interior	9	07-01-2009 09:17 PM

05-02-2010, 10:39 PM	#245 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1065	It's pretty disapointing that so many people are having fitment issues. Is there anyone here that has actually installed this without a tiny gap?

05-21-2010, 08:42 AM	#248 (permalink)
VinZ Base Member Join Date: Jun 2009 Location: Florida Posts: 47 Drives: 2009 370Z PG Sport Rep Power: 16	Any updates on the fit of this diffuser? I love the look of it but I'm hesitant to get one because of the fitment issues. Dose anyone have any closeup pics of the gaps?