EVO-R 370Z carbon fiber center bumpre cover

alexpila · 10-30-2009, 02:01 PM

Quote:

Originally Posted by DDMotorsports

No you don't need to re-drill anything once the rivets are out. Just pop a new rivet in the existing hole. You will need a riveting tool though if you don't have one already. Or just get some nuts & bolts that fit through the holes.

Really???? Im so confused tomorrow i'll take a look cause none of this makes sense!! The front aero bumper wont go back on With the holes that are on the part as when her moulded it he did not use a front fang with the holes for the aero optional splitter piece...

kenchan · 10-30-2009, 02:14 PM

thought the SportPackage's front lip (air dam)was only held in by screws and 3-4 fiction clips each side?

thats why you need to drill new holes in the CF and use the longer screws EVO mentioned he'll include. then just snap the side friction clips together.

check the service manual. (i can't access my manual at the moment.

)

alexpila · 10-30-2009, 02:17 PM

We definetly need bucknakedru's help! as he has done it on his...

M.Bonanni · 10-30-2009, 02:38 PM

Quote:

Originally Posted by alexpila

Really???? Im so confused tomorrow i'll take a look cause none of this makes sense!! The front aero bumper wont go back on With the holes that are on the part as when her moulded it he did not use a front fang with the holes for the aero optional splitter piece...

Oh thats right, yes you will need to drill holes in the EVO-R piece to fully re-install the front aero package lip thing.

Quote:

Originally Posted by kenchan

thought the SportPackage's front lip (air dam)was only held in by screws and 3-4 fiction clips each side?

thats why you need to drill new holes in the CF and use the longer screws EVO mentioned he'll include. then just snap the side friction clips together.

check the service manual. (i can't access my manual at the moment.

)

The aero package front air dam is held on by 9 rivets and 4 clips..

EXT

Section EXT-18

M.Bonanni · 10-30-2009, 03:28 PM

Guys, just installed mine on my car and re-attached the aero lip in under an hour taking my time. I re-installed the aero lip using the clips on the ends and the three supplied bolts from EVO-R. You just have to drill the front aero lip in two places for two of the three bolts and you're good. Easy install. I will probably go back and drill through the EVO-R piece and re-rivet the rest of the holes after SEMA because I am anal like that, but its held on pretty firm with the three bolts and four clips.

alexpila · 10-30-2009, 04:56 PM

Quote:

Originally Posted by DDMotorsports

Guys, just installed mine on my car and re-attached the aero lip in under an hour taking my time. I re-installed the aero lip using the clips on the ends and the three supplied bolts from EVO-R. You just have to drill the front aero lip in two places for two of the three bolts and you're good. Easy install. I will probably go back and drill through the EVO-R piece and re-rivet the rest of the holes after SEMA because I am anal like that, but its held on pretty firm with the three bolts and four clips.

Ok DDMotorsports thanks. You mind posting some pictures of underneath so i can see the bolts etc and any other help cause im quite useless!!!

Haha thanks alot!!!!

bucknakedru · 10-31-2009, 04:36 PM

Quote:

Originally Posted by alexpila

We definetly need bucknakedru's help! as he has done it on his...

My front aero spoiler is mounted with bolts and nuts NOT rivet's. It was installed at the dealer so I don't know if that is why I don't have rivet's. But to install if you have rivets just drill them out. I left the bolts on each end of the spoiler to keep it on the car. You dont need to remove them to install the cover.
Then just install the cover. Hold the spoler up to the cover to line up the holes and then drill through the cover. Reinstall the spoiler with longer bolts. You have to remove the undertray to access top of inside bumper to attach the nuts to the bolts.
Also there is only one hole drilled on the CF cover...ITS USELESS. I don't know why its there since it does not line up with anything. Hope this helps. Its not as hard as you think.

alexpila · 11-01-2009, 12:16 PM

Ok we did the install... had to drill the rivets for the aero bumper probably about 8... So the weave of the carbon and finish was good however fitment of the left hand side was perfect but the right hand side is not perfect at all some gaps e.t.c.... Decided i'll refit it agan and check if something is wrong... One hole did match up with the cover so we bolted it on and continued to drill the other two using the aero bumpers holes as guides.
Went well and aero bumper seems secure with the three bolts. Here are some pictures...

Ricochet48 · 11-01-2009, 07:12 PM

That looks great! especially with white

G35guy84 · 11-01-2009, 08:45 PM

Very nice, bro! Can't wait to order mine!!

alexpila · 11-02-2009, 02:25 AM

Yeah i like it to especially on the white!! i ordered it on Sunday night and picked it up at my post office on Friday even though it came all the way from Taiwan!!!.. A few fitment issues but will sort it out when i get the chance (or wen i've stopped being so lazy!!)

cvega · 11-03-2009, 08:21 PM

soo u ordered it from evo-r? or no? y is it coming from taiwan? haha im confused. Hate my work computer cuz it doesnt let me see pics...

EVOR · 11-03-2009, 11:52 PM

Anyone in the Las Vegas area or south Cal area. I have 1 sample for SEMA show up for sale. Pick up only. No shipping. Special price. Please PM me.

alexpila · 11-04-2009, 04:17 AM

i did order it from evo-r so im not sure why it came from tiawan!!!??? Hmmmm

Evo-R care to answer hahaha....

Quote:

Originally Posted by cvega

soo u ordered it from evo-r? or no? y is it coming from taiwan? haha im confused. Hate my work computer cuz it doesnt let me see pics...

Modshack · 11-04-2009, 02:07 PM

Quote:

Originally Posted by alexpila

i did order it from evo-r so im not sure why it came from tiawan!!!??? Hmmmm

I'd guess that's where they're made. I've seen a lot of nice, affordable CF work come out of Taiwan...

10-30-2009, 02:17 PM	#123 (permalink)
alexpila Base Member Join Date: Sep 2009 Location: Johannesburg Posts: 178 Drives: 09 370z AT Touring Rep Power: 16	We definetly need bucknakedru's help! as he has done it on his... __________________ 09 7AT Touring 370z, Pearl White, Evo-R Carbon Fang Cover, Carbon Top Cover, HKS Centre Pipe, Illuminated Kickplates, Custom Sprayed stock RAYS

10-30-2009, 03:28 PM	#125 (permalink)
M.Bonanni The370Z.com Sponsor Join Date: Nov 2008 Location: Las Vegas Posts: 2,575 Drives: Fast Rep Power: 1320	Guys, just installed mine on my car and re-attached the aero lip in under an hour taking my time. I re-installed the aero lip using the clips on the ends and the three supplied bolts from EVO-R. You just have to drill the front aero lip in two places for two of the three bolts and you're good. Easy install. I will probably go back and drill through the EVO-R piece and re-rivet the rest of the holes after SEMA because I am anal like that, but its held on pretty firm with the three bolts and four clips. __________________ MikeBonanni.com Twitter: http://www.twitter.com/MikeBonanni Facebook: http://www.facebook.com/MBonanni36 Function > Form

11-01-2009, 12:16 PM	#128 (permalink)
alexpila Base Member Join Date: Sep 2009 Location: Johannesburg Posts: 178 Drives: 09 370z AT Touring Rep Power: 16	Ok we did the install... had to drill the rivets for the aero bumper probably about 8... So the weave of the carbon and finish was good however fitment of the left hand side was perfect but the right hand side is not perfect at all some gaps e.t.c.... Decided i'll refit it agan and check if something is wrong... One hole did match up with the cover so we bolted it on and continued to drill the other two using the aero bumpers holes as guides. Went well and aero bumper seems secure with the three bolts. Here are some pictures... __________________ 09 7AT Touring 370z, Pearl White, Evo-R Carbon Fang Cover, Carbon Top Cover, HKS Centre Pipe, Illuminated Kickplates, Custom Sprayed stock RAYS

11-01-2009, 07:12 PM	#129 (permalink)
Ricochet48 Base Member Join Date: Dec 2008 Location: Darien, IL Posts: 117 Drives: 06 Acura RSX Type S Rep Power: 16	That looks great! especially with white __________________ I feel like some RWD and torque!

11-01-2009, 08:45 PM	#130 (permalink)
G35guy84 Enthusiast Member Join Date: Aug 2009 Location: New York Posts: 305 Drives: '09 370Z 7AT Sprt PW Rep Power: 16	Very nice, bro! Can't wait to order mine!! __________________ '09 Nissan 370Z Base 7AT - Sport Package - Pearl White \| Performance Mods: Stillen G3 CAI \| F.I. HFC \| F.I. TDX CBE w/ 18" resonators \| Megan Racing coilover kit \| Ichiba rear camber kit \| 20mm front / 25mm rear H&R spacers \| Aesthetic Mods: White interior/license plate LEDs \| 6000K bulbs \| 20% tint

10-30-2009, 02:14 PM	#122 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	thought the SportPackage's front lip (air dam)was only held in by screws and 3-4 fiction clips each side? thats why you need to drill new holes in the CF and use the longer screws EVO mentioned he'll include. then just snap the side friction clips together. check the service manual. (i can't access my manual at the moment. )

11-02-2009, 02:25 AM	#131 (permalink)
alexpila Base Member Join Date: Sep 2009 Location: Johannesburg Posts: 178 Drives: 09 370z AT Touring Rep Power: 16	Yeah i like it to especially on the white!! i ordered it on Sunday night and picked it up at my post office on Friday even though it came all the way from Taiwan!!!.. A few fitment issues but will sort it out when i get the chance (or wen i've stopped being so lazy!!) __________________ 09 7AT Touring 370z, Pearl White, Evo-R Carbon Fang Cover, Carbon Top Cover, HKS Centre Pipe, Illuminated Kickplates, Custom Sprayed stock RAYS

11-03-2009, 08:21 PM	#132 (permalink)
cvega Base Member Join Date: Jul 2009 Location: BoStOn Posts: 128 Drives: 2012 Nismo 370z Rep Power: 16	soo u ordered it from evo-r? or no? y is it coming from taiwan? haha im confused. Hate my work computer cuz it doesnt let me see pics...

11-03-2009, 11:52 PM	#133 (permalink)
EVOR A True Z Fanatic Join Date: Sep 2009 Location: New York Posts: 1,647 Drives: 09 Nismo 370Z #80 Rep Power: 45	Anyone in the Las Vegas area or south Cal area. I have 1 sample for SEMA show up for sale. Pick up only. No shipping. Special price. Please PM me. __________________ WWW.EVO-R.NET

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Carbon Fiber Steering Pod Cover @ The 370ZSOURCE!!!!!!!!!	Michael@TheZStore	Body Interior/Exterior	30	10-14-2009 04:30 PM
looking for 370z for carbon fiber project	370z_hot	North East Region	2	05-27-2009 01:57 PM
looking for 370z for carbon fiber project and free carbon fiber products	370z_hot	Exterior & Interior	23	05-16-2009 10:32 PM
hi, 370z project start, carbon fiber hood	370z_hot	New Forum Member	3	05-13-2009 12:37 PM
Carbon Fiber 370Z B Pillar idea	AK370Z	Exterior & Interior	22	04-21-2009 09:24 AM