370Z side blinker mod, made it into a parking light!

killermiller · 10-03-2014, 12:08 PM

Having some problems with my Youtube right now.

Jack up car (use jack stands)
take wheel off
take off inner fender well covers (3 screws, 1 -10mm bolt, 14 push pins)
find and unplug parking light plug on the back of the headlight
plug in harness (can't plug in the wrong way)
take out the side marker (easy, push towards back of car and wiggle out)
unplug side marker
Plug harness into side marker and replace by pushing it in.
wire tie harness to another harness in the fender well
assemble inner fender well covers
put wheel back on
take car off of jacks
DONE

tools needed:
jack
jack stand
lug nut wrench
#2 phillips screwdriver
small flat head screwdriver
10mm socket

Cost:
This mod will include:
wire ties
2 harnesses (left and right)

everything is plug in, no cutting.

$150.00 shipped to the lower 48, all other areas will be $150 + actual shipping costs

View Poll Results: I would purchase one of these
NO way	13	54.17%
Yes	4	16.67%
maybe	7	29.17%
Voters: 24. You may not vote on this poll

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY - Side Blinker Black Out	Dallaz	DIY Section (Do-It-Yourself)	10	06-09-2014 05:24 PM
Parking light led	Gibby1113	Exterior & Interior	12	01-03-2014 09:23 AM
VDC off light / VDC slip light constant on with parking brake light acting slip light	ZeN	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	0	08-27-2012 10:04 AM
LED Parking light as DRL	Maila87	Exterior & Interior	5	05-23-2011 06:22 PM
Installed new tail light blinker bulb's	ZPhycho	Exterior & Interior	30	10-07-2010 10:37 AM

10-03-2014, 12:08 PM	#3 (permalink)
killermiller Base Member Join Date: Sep 2014 Location: gulf breeze, fl Posts: 12 Drives: 2011 NISMO 370Z Rep Power: 11	Having some problems with my Youtube right now. Jack up car (use jack stands) take wheel off take off inner fender well covers (3 screws, 1 -10mm bolt, 14 push pins) find and unplug parking light plug on the back of the headlight plug in harness (can't plug in the wrong way) take out the side marker (easy, push towards back of car and wiggle out) unplug side marker Plug harness into side marker and replace by pushing it in. wire tie harness to another harness in the fender well assemble inner fender well covers put wheel back on take car off of jacks DONE tools needed: jack jack stand lug nut wrench #2 phillips screwdriver small flat head screwdriver 10mm socket Cost: This mod will include: wire ties 2 harnesses (left and right) everything is plug in, no cutting. $150.00 shipped to the lower 48, all other areas will be $150 + actual shipping costs