Replacement gas cap tether

wdkwang · 08-24-2014, 02:09 PM

Long story short, an attendant at a NJ gas station broke off the bit on the gas cap tether that holds it to the car. I can't seem to find a replacement for it on courtesyparts.com. This irks me quite a bit. Any help on a replacement on that bit?

aszyd · 08-24-2014, 03:21 PM

That part is considered to be a piece of the gas cap assembly. You have to replace the whole thing.

Part # 17251-JJ60B

1325 · 08-24-2014, 03:22 PM

GAS CAP - 370Z (Z34) 2009+ :: Nissan Parts, NISMO and Nissan Accessories - Courtesyparts.com

wdkwang · 08-24-2014, 03:58 PM

Thanks for the input, guys. I can't seem to justify the cost of the entire assembly for that little circle piece that I'm pointing to. I'm sure a hardware store of some kind may have it if I knew what it was called

falconfixer · 08-24-2014, 04:43 PM

http://www.amazon.com/ACDelco-GT261-...ews/B000C9SJUC

Looks like they have a few varieties to choose from. I googled fuel cap lanyard and got this hit. Good luck finding just the lanyard/tether.

1325 · 08-24-2014, 05:18 PM

Tether anchor?

kenchan · 08-25-2014, 11:29 AM

is that the tab you're just missing or did the line itself break where it anchors to the car?

if the latter, i'd just cut the thing off clean and use the cap without the tether.
put a round e-tape or something to cover the hole where the anchor tab thingie was.

wdkwang · 08-25-2014, 11:32 AM

It's the round tab that connects the tether to the car that's broken. I like the tether on the car.

Arrvaxx · 08-25-2014, 11:37 AM

Dude! Get one of those chains for wallets!

kenchan · 08-25-2014, 11:47 AM

Quote:

Originally Posted by wdkwang

It's the round tab that connects the tether to the car that's broken. I like the tether on the car.

yah, im sure you can find a substitute tab at your local autoparts store.
usually they sell them where they sell screws and fasteners and stuff.

clookie · 08-28-2014, 02:25 PM

Isn't it like under $40 for a new one?

kenchan · 08-28-2014, 02:33 PM

tabs are much less though... not sure if he ever went to the autoparts store yet.

240se · 08-28-2014, 05:39 PM

If it's just the pin that attaches the tether to the hole then just use a small zip tie and clip off the excess.

kenchan · 08-28-2014, 05:43 PM

Quote:

Originally Posted by 240se

If it's just the pin that attaches the tether to the hole then just use a small zip tie and clip off the excess.

you broke yours, huh?

240se · 08-29-2014, 10:31 AM

Quote:

Originally Posted by kenchan

you broke yours, huh?

Close, first owner must have broken it.

08-24-2014, 02:09 PM	#1 (permalink)
wdkwang Track Member Join Date: Nov 2010 Location: N/A Posts: 899 Drives: slidewayz Rep Power: 21	Replacement gas cap tether Long story short, an attendant at a NJ gas station broke off the bit on the gas cap tether that holds it to the car. I can't seem to find a replacement for it on courtesyparts.com. This irks me quite a bit. Any help on a replacement on that bit? __________________ Powerhouse Amuse \| K&N Typhoon Intakes \| MotorDyne ART Pipes \| Borla Catback Exhaust \| B&M Short Shifter \| Intake Ducts \| Ichiba 25mm F/R Spacers \| Carbon Fiber Interior Vinyl Wrap \| Tints \| 10000k HIDs \| Vtak, yo!

08-24-2014, 03:21 PM	#2 (permalink)
aszyd Track Member Join Date: May 2014 Location: Florida Posts: 877 Drives: Magma Red 370z T+S Rep Power: 21	That part is considered to be a piece of the gas cap assembly. You have to replace the whole thing. Part # 17251-JJ60B __________________ Competition Clutch\|Fast Intentions\|Maxbore\|NST\|Setrab\|Stillen\|Tomei\|Uprev\| Z1 Avant Garde\|SPC\|Stance\|Whiteline Aerojacket\|Seibon\|Tanabe\|TRS\|TWM

08-25-2014, 11:32 AM	#8 (permalink)
wdkwang Track Member Join Date: Nov 2010 Location: N/A Posts: 899 Drives: slidewayz Rep Power: 21	It's the round tab that connects the tether to the car that's broken. I like the tether on the car. __________________ Powerhouse Amuse \| K&N Typhoon Intakes \| MotorDyne ART Pipes \| Borla Catback Exhaust \| B&M Short Shifter \| Intake Ducts \| Ichiba 25mm F/R Spacers \| Carbon Fiber Interior Vinyl Wrap \| Tints \| 10000k HIDs \| Vtak, yo!

08-25-2014, 11:37 AM	#9 (permalink)
Arrvaxx A True Z Fanatic Join Date: Jul 2013 Location: Whore Island, MN Posts: 1,243 Drives: 40th F.I. Twin Turbo Rep Power: 18	Dude! Get one of those chains for wallets! Smashley and aszyd like this. __________________ 2010 370Z 40th Anniversary (#480 born 1/19/2010) Fast Intentions Twin Turbo \| Varis Arising II \| Limited Edition Recaro Sportster \| Tuned by Specialty Z \| 604hp 525 torque @14lbs boost on 100 octane

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Replacement car	maniac	New 370Z Owner	9	05-28-2011 11:34 PM
LTT H&R 10mm Stud Replacement Spacers for 15mm stud replacement H&R	chuckd05	Parts for sale (Private Classifieds)	5	02-16-2011 06:05 PM
Best cat replacement..	akgambler47	Intake/Exhaust	17	07-23-2010 01:18 AM
Minor thing...gas cap tether	kannibul	Nissan 370Z General Discussions	25	09-06-2009 11:12 AM
Fog Replacement	370z2	Nissan 370Z General Discussions	32	01-28-2009 07:50 PM

08-24-2014, 03:22 PM	#3 (permalink)
1325 Enthusiast Member Join Date: Jul 2010 Location: Florida Posts: 287 Drives: 10 370Z BLK 6M Rep Power: 15	GAS CAP - 370Z (Z34) 2009+ :: Nissan Parts, NISMO and Nissan Accessories - Courtesyparts.com

08-24-2014, 04:43 PM	#5 (permalink)
falconfixer Track Member Join Date: Feb 2012 Location: 10aC Posts: 978 Drives: Taco Rep Power: 76	http://www.amazon.com/ACDelco-GT261-...ews/B000C9SJUC Looks like they have a few varieties to choose from. I googled fuel cap lanyard and got this hit. Good luck finding just the lanyard/tether.

08-24-2014, 05:18 PM	#6 (permalink)
1325 Enthusiast Member Join Date: Jul 2010 Location: Florida Posts: 287 Drives: 10 370Z BLK 6M Rep Power: 15	Tether anchor?

08-25-2014, 11:29 AM	#7 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	is that the tab you're just missing or did the line itself break where it anchors to the car? if the latter, i'd just cut the thing off clean and use the cap without the tether. put a round e-tape or something to cover the hole where the anchor tab thingie was.

08-28-2014, 02:25 PM	#11 (permalink)
clookie Base Member Join Date: Apr 2014 Location: Houston Posts: 1 Drives: 09 370z Rep Power: 11	Isn't it like under $40 for a new one?

08-28-2014, 02:33 PM	#12 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	tabs are much less though... not sure if he ever went to the autoparts store yet.

08-28-2014, 05:39 PM	#13 (permalink)
240se Enthusiast Member Join Date: Nov 2013 Location: VA Posts: 260 Drives: Gunmetal 12' Rep Power: 12	If it's just the pin that attaches the tether to the hole then just use a small zip tie and clip off the excess.