2015 Nismo Bumper on 2009 Sport possible?

axmea? · 04-17-2016, 06:45 PM

Thanks for posting too tall. I will have a drl someday but I would rather spend that kind of money on something else like on cooling.

Don't you guys find that extra plumbing quite useless?

OptionZero · 04-17-2016, 07:39 PM

I can't wait for someone to make some brake ducts like the ones available for the older Nismo front

and for someone to try the Varis intake ducts as well

EDIT: Some german racing team did it

patabq · 04-18-2016, 09:03 AM

If I do the conversion, I have not found a good way to attach my brake ducts to the DRL holes or front area like on the standard nose. I saw this pic a couple months ago and decided I would use that 4" inlet necked down to my 3" ducts.

///maestro · 04-18-2016, 09:52 AM

TooTall - I may be PMing you for some help on what to tap into to get my DRLs wired up. I'm trying to make it so that it's very easy to disconnect so when I take the bumper off, I don't have to rip out or cut any wires.

This weekend was all about the Z - Put the new fenders on, baked and painted the headlights, and put the new front bumper on. Still need to wire the DRLs, put the headlights back in, and put the sideskirts back on. Next weekend the new rear bumper and wing go on!

too tall · 04-18-2016, 10:09 AM

I used some of these to be able to disconnect the DRL.

Electrical Waterproof Connectors Set 1 2 3 4 5 6 Pin Way Superseal Pair Car Boat | eBay

The NISMO lights have a connector on all ready but i couldnt source the female end to use on the loom I created. So i removed the OEM connector and used the ones linked above.

Which DRL do you have?

///maestro · 04-18-2016, 10:15 AM

Quote:

Originally Posted by too tall

I used some of these to be able to disconnect the DRL.

Electrical Waterproof Connectors Set 1 2 3 4 5 6 Pin Way Superseal Pair Car Boat | eBay

The NISMO lights have a connector on all ready but i couldnt source the female end to use on the loom I created. So i removed the OEM connector and used the ones linked above.

Which DRL do you have?

I have the EVO-R DRLs....so it's just a red & and black wire that I have to connect (positive/negative)

too tall · 04-18-2016, 10:21 AM

Ah ok. The theory is the same, just add a waterproof connector to the EVO-R DRL and you'll be able to disconnect them from your loom if you need to remove the bumper.

The connectors i linked above are the exact ones I used, I had to order mine online - but i'm in the UK.

too tall · 04-18-2016, 10:23 AM

DIY: DRL Wiring For Pre-'13 Z's

That thread may be of use to you.

ZAtlanta_OG · 04-18-2016, 10:08 PM

I did a thing.

zefaulter · 04-20-2016, 11:52 AM

Does the rear bumper come with the read stripe? Mine's all painted one color and I want to get the same red on there

Sent from my SM-N910W8 using Tapatalk

cooltoy · 04-20-2016, 12:05 PM

Bumpers come unpainted. So you would need to paint the red stripe, if you want one.

zefaulter · 04-20-2016, 12:36 PM

Quote:

Originally Posted by cooltoy

Bumpers come unpainted. So you would need to paint the red stripe, if you want one.

Damn, I wasn't thinking about it. Any matching Vinyl out there I can buy?

cooltoy · 04-20-2016, 12:42 PM

Probably. Check out a shop that does that kind of thing. I am sure they can find a vinyl close enough. Do you have the red inserts in the front? If so, just match to them.

zefaulter · 04-20-2016, 01:42 PM

Quote:

Originally Posted by cooltoy

Probably. Check out a shop that does that kind of thing. I am sure they can find a vinyl close enough. Do you have the red inserts in the front? If so, just match to them.

Alright, thanks man

too tall · 04-20-2016, 01:47 PM

Give me 5 mins I'll post pics of the rear.

04-17-2016, 06:45 PM	#856 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,235 Drives: WELL ZED PW 6MT Rep Power: 53241	Thanks for posting too tall. I will have a drl someday but I would rather spend that kind of money on something else like on cooling. Don't you guys find that extra plumbing quite useless? __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete

04-17-2016, 07:39 PM	#857 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,231 Drives: 15 370Z Nismo 6MT Rep Power: 214100	I can't wait for someone to make some brake ducts like the ones available for the older Nismo front and for someone to try the Varis intake ducts as well EDIT: Some german racing team did it carlitos_370z likes this.

04-18-2016, 09:52 AM	#859 (permalink)
///maestro Track Member Join Date: Dec 2014 Location: Grand Rapids, MI Posts: 530 Drives: 11' 370z\|09' BMW M3 Rep Power: 11	TooTall - I may be PMing you for some help on what to tap into to get my DRLs wired up. I'm trying to make it so that it's very easy to disconnect so when I take the bumper off, I don't have to rip out or cut any wires. This weekend was all about the Z - Put the new fenders on, baked and painted the headlights, and put the new front bumper on. Still need to wire the DRLs, put the headlights back in, and put the sideskirts back on. Next weekend the new rear bumper and wing go on! LMBmikeZ likes this. __________________ Gallo24 swapped 370z Instagram: @z34_motorsport

04-18-2016, 10:08 PM	#864 (permalink)
ZAtlanta_OG Enthusiast Member Join Date: May 2015 Location: Florida Posts: 315 Drives: 370z Rep Power: 322	I did a thing. carlitos_370z likes this. __________________ MY PHOTO BLOG instagram 2012 Nismo #268

04-20-2016, 12:05 PM	#866 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,971 Drives: 14 PW 370Z S/T MT Rep Power: 243722	Bumpers come unpainted. So you would need to paint the red stripe, if you want one. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang. Last edited by cooltoy; 04-20-2016 at 12:07 PM.

04-18-2016, 09:03 AM	#858 (permalink)
patabq Base Member Join Date: Jun 2015 Location: Albuquerque, NM Posts: 64 Drives: Corvette Z06 07 Rep Power: 10	If I do the conversion, I have not found a good way to attach my brake ducts to the DRL holes or front area like on the standard nose. I saw this pic a couple months ago and decided I would use that 4" inlet necked down to my 3" ducts.

04-18-2016, 10:09 AM	#860 (permalink)
too tall Base Member Join Date: Jan 2016 Location: UK Posts: 30 Drives: 370Z GT Edition Rep Power: 9	I used some of these to be able to disconnect the DRL. Electrical Waterproof Connectors Set 1 2 3 4 5 6 Pin Way Superseal Pair Car Boat \| eBay The NISMO lights have a connector on all ready but i couldnt source the female end to use on the loom I created. So i removed the OEM connector and used the ones linked above. Which DRL do you have?

04-18-2016, 10:21 AM	#862 (permalink)
too tall Base Member Join Date: Jan 2016 Location: UK Posts: 30 Drives: 370Z GT Edition Rep Power: 9	Ah ok. The theory is the same, just add a waterproof connector to the EVO-R DRL and you'll be able to disconnect them from your loom if you need to remove the bumper. The connectors i linked above are the exact ones I used, I had to order mine online - but i'm in the UK.

04-18-2016, 10:23 AM	#863 (permalink)
too tall Base Member Join Date: Jan 2016 Location: UK Posts: 30 Drives: 370Z GT Edition Rep Power: 9	DIY: DRL Wiring For Pre-'13 Z's That thread may be of use to you.

04-20-2016, 11:52 AM	#865 (permalink)
zefaulter A True Z Fanatic Join Date: Jan 2013 Location: Toronto, Canada Posts: 1,983 Drives: 40th 370Z Rep Power: 27	Does the rear bumper come with the read stripe? Mine's all painted one color and I want to get the same red on there Sent from my SM-N910W8 using Tapatalk

04-20-2016, 12:42 PM	#868 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,971 Drives: 14 PW 370Z S/T MT Rep Power: 243722	Probably. Check out a shop that does that kind of thing. I am sure they can find a vinyl close enough. Do you have the red inserts in the front? If so, just match to them. zefaulter likes this. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

04-20-2016, 01:47 PM	#870 (permalink)
too tall Base Member Join Date: Jan 2016 Location: UK Posts: 30 Drives: 370Z GT Edition Rep Power: 9	Give me 5 mins I'll post pics of the rear.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] 2015 front bumper	jewnbug	Parts for sale (Private Classifieds)	23	09-09-2015 08:29 PM
[FOR SALE] 2009/2012 Nismo front bumper	Count Maddox	Parts for sale (Private Classifieds)	18	05-09-2014 02:52 PM
[WTB] 2009-2013 nismo front bumper cover.	deuce189	Parts for sale (Private Classifieds)	0	11-21-2013 11:50 PM
Base/Sport to Nismo conversion/FRONT BUMPER Cost breakdown	370zFORme!!	DIY Section (Do-It-Yourself)	19	02-11-2013 01:41 PM
2009 nismo front bumper	ocean.mirage	Exterior & Interior	6	07-30-2010 11:31 AM