2015 Nismo Bumper on 2009 Sport possible?

DeliriousClam · 02-28-2016, 08:43 AM

It's coming along. I'm wondering if I should put mesh where the DRL' s usually go because I don't want to do DRL's... What does everyone think?

cooltoy · 02-28-2016, 11:23 AM

Say yes to the mesh.

axmea? · 02-28-2016, 12:16 PM

DC - here's what I did. Once painted, it'll be siliconed on the back side. I used two layers of mesh. One sheet folded in half.

[IMG]

25194228841_67c0af467e_o by Raf, on Flickr[/IMG]

Hayden_223 · 02-28-2016, 03:38 PM

Mesh looks good! What kind is that you used?

patabq · 03-01-2016, 06:22 PM

Yes, what mesh? I am thinking of using the DRL holes for brake ducts. Has anyone done that?

axmea? · 03-01-2016, 10:18 PM

From here:

Diamond Grill Mesh Sheets - customcargrills.com

patabq · 03-02-2016, 03:13 PM

Perfect. Thanks

ZAtlanta_OG · 03-08-2016, 06:53 PM

oh hi

wheysted32 · 03-22-2016, 11:10 AM

Greetings, I have all the parts for the front conversion but having some issues with the rear parts.

I talked to Nissan and they are not showing any difference for the rear splash shields between the nismo and non nismo editions. Also they are not sure what the center lower rear brace is? And I don't know either so I cant explain! Hoping someone can help me out on these two issues so I can get this project moving.

Also doing side skits...anyone know if there's any additional hardware for those?

Thank you!

Sent from my SM-N920V using Tapatalk

too tall · 03-22-2016, 11:20 AM

Quote:

Originally Posted by wheysted32

Greetings, I have all the parts for the front conversion but having some issues with the rear parts.

I talked to Nissan and they are not showing any difference for the rear splash shields between the nismo and non nismo editions. Also they are not sure what the center lower rear brace is? And I don't know either so I cant explain! Hoping someone can help me out on these two issues so I can get this project moving.

Also doing side skits...anyone know if there's any additional hardware for those?

Thank you!

Sent from my SM-N920V using Tapatalk

No additional parts required for the side skirts, the are a direct fit.

If by centre lower rear brace you mean the part titled retainer rear bumper, lower I think its for the rear fog light.

I'm doing the rear conversion shortly once i pick the bumper up from the paint shop. I'll let you know for certain what is and isn't needed.

too tall · 03-22-2016, 03:51 PM

Here's a list i put together on the UK forum.

Please check the correct part numbers before ordering anything.

Front:

62064-6GA0B PROTECTOR-FRONT BUMPER - Arch extender LH
62064-6GA0A PROTECTOR-FRONT BUMPER - Arch extender RH
62077-6GA0A MOULDING-FRONT BUMPER,LH - Side insert trim
62076-6GA0A MOULDING-FRONT BUMPER,RH - Side insert trim
62087-6GA0A MOULDING-FRONT BUMPER,LH - Red insert
62086-6GA0A MOULDING-FRONT BUMPER,RH - Red insert
62022-6GA2H FASCIA-FRONT BUMPER

Skirts:

76850-6GA0H PROTECTOR-BODY SIDE SILL,RH
76851-6GA0H PROTECTOR-BODY SIDE SILL,LH

Rear:

76748-6GA0A PROTECTOR-REAR WHEEL HOUSE,RH - Arch liner
76749-6GA0A PROTECTOR-REAR WHEEL HOUSE,LH - Arch liner
85022-6GA2H FASCIA-REAR BUMPER - £364.38 (Note: dealer thought part number was 85022-6GA2H)
85010-6GA0A COVER-REAR BUMPER - Tow cover
85249-1EA2A RETAINER-REAR BUMPER,LOWER - Rear bumper lower retainer (not sure if required).

too tall · 03-23-2016, 08:10 AM

Final badge arrived today.

Full house!

wheysted32 · 03-23-2016, 01:04 PM

Quote:

Originally Posted by too tall

Here's a list i put together on the UK forum.

Please check the correct part numbers before ordering anything.

Front:

62064-6GA0B PROTECTOR-FRONT BUMPER - Arch extender LH
62064-6GA0A PROTECTOR-FRONT BUMPER - Arch extender RH
62077-6GA0A MOULDING-FRONT BUMPER,LH - Side insert trim
62076-6GA0A MOULDING-FRONT BUMPER,RH - Side insert trim
62087-6GA0A MOULDING-FRONT BUMPER,LH - Red insert
62086-6GA0A MOULDING-FRONT BUMPER,RH - Red insert
62022-6GA2H FASCIA-FRONT BUMPER

Skirts:

76850-6GA0H PROTECTOR-BODY SIDE SILL,RH
76851-6GA0H PROTECTOR-BODY SIDE SILL,LH

Rear:

76748-6GA0A PROTECTOR-REAR WHEEL HOUSE,RH - Arch liner
76749-6GA0A PROTECTOR-REAR WHEEL HOUSE,LH - Arch liner
85022-6GA2H FASCIA-REAR BUMPER - £364.38 (Note: dealer thought part number was 85022-6GA2H)
85010-6GA0A COVER-REAR BUMPER - Tow cover
85249-1EA2A RETAINER-REAR BUMPER,LOWER - Rear bumper lower retainer (not sure if required).

Are the two parts you listed for the side skits the actual skirts? Any update on what's needed for sure on the rear??

Sent from my SM-N920V using Tapatalk

sipar69 · 03-23-2016, 02:20 PM

Hi

This is my first post although I've been lurking around and getting great tips from here for some time. I'm in the UK and I have the earlier version of the 370Z Nismo. I'm interested in converting to the later version's front bumper. I've checked this thread and I'm not sure if anyone over here has done the same thing? If so, it would be great to see a picture and hear about any issues that came up. Thanks

cooltoy · 03-23-2016, 02:28 PM

Once you pull the earlier Nismo kit of your car, the conversion is no different then what you have seen in this thread. You'll need a different under-tray as yours will not work. Unless you cut it up I guess.

02-28-2016, 08:43 AM	#781 (permalink)
DeliriousClam A True Z Fanatic Join Date: May 2015 Location: NJ Age: 31 Posts: 3,758 Drives: 12 Base Sport Rep Power: 54272	It's coming along. I'm wondering if I should put mesh where the DRL' s usually go because I don't want to do DRL's... What does everyone think? wheysted32 likes this. __________________ Stillen, AAM, Shine Auto, Fujimora, Swift, EVO-R, Carbon Fiber Element, Nitrous Outlet MECP Advanced: CEA26671 Most of what I post here are artistic works of fiction and falsehood. Only a fool would take anything I post here as fact.

02-28-2016, 11:23 AM	#782 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,966 Drives: 14 PW 370Z S/T MT Rep Power: 243722	Say yes to the mesh. KaienZ34 likes this. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

02-28-2016, 12:16 PM	#783 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,235 Drives: WELL ZED PW 6MT Rep Power: 53241	DC - here's what I did. Once painted, it'll be siliconed on the back side. I used two layers of mesh. One sheet folded in half. [IMG]25194228841_67c0af467e_o by Raf, on Flickr[/IMG] LMBmikeZ, Initial Z, brucelidat and 1 others like this. __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete

02-28-2016, 03:38 PM	#784 (permalink)
Hayden_223 Base Member Join Date: Jul 2014 Location: Rome, GA Posts: 27 Drives: 09 370z t/sport M6 Rep Power: 11	Mesh looks good! What kind is that you used? __________________ Aam s-line mid-pipe\|AAM short tails\|Z1 HFC\|Z1 Post MAF tubes\|K&N Drop ins\|Z1 20mm spacers\|Eibach Sways\|ARK GT-S Lowering Springs\|UPREV\|

03-01-2016, 10:18 PM	#786 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,235 Drives: WELL ZED PW 6MT Rep Power: 53241	From here: Diamond Grill Mesh Sheets - customcargrills.com LMBmikeZ likes this. __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete

03-01-2016, 06:22 PM	#785 (permalink)
patabq Base Member Join Date: Jun 2015 Location: Albuquerque, NM Posts: 64 Drives: Corvette Z06 07 Rep Power: 10	Yes, what mesh? I am thinking of using the DRL holes for brake ducts. Has anyone done that?

03-02-2016, 03:13 PM	#787 (permalink)
patabq Base Member Join Date: Jun 2015 Location: Albuquerque, NM Posts: 64 Drives: Corvette Z06 07 Rep Power: 10	Perfect. Thanks

03-08-2016, 06:53 PM	#788 (permalink)
ZAtlanta_OG Enthusiast Member Join Date: May 2015 Location: Florida Posts: 315 Drives: 370z Rep Power: 322	oh hi GordoNx3o9 likes this. __________________ MY PHOTO BLOG instagram 2012 Nismo #268

03-22-2016, 11:10 AM	#789 (permalink)
wheysted32 Base Member Join Date: Mar 2015 Location: Columbus Posts: 109 Drives: 2010 370z Touring Rep Power: 10	Greetings, I have all the parts for the front conversion but having some issues with the rear parts. I talked to Nissan and they are not showing any difference for the rear splash shields between the nismo and non nismo editions. Also they are not sure what the center lower rear brace is? And I don't know either so I cant explain! Hoping someone can help me out on these two issues so I can get this project moving. Also doing side skits...anyone know if there's any additional hardware for those? Thank you! Sent from my SM-N920V using Tapatalk

03-22-2016, 03:51 PM	#791 (permalink)
too tall Base Member Join Date: Jan 2016 Location: UK Posts: 30 Drives: 370Z GT Edition Rep Power: 9	Here's a list i put together on the UK forum. Please check the correct part numbers before ordering anything. Front: 62064-6GA0B PROTECTOR-FRONT BUMPER - Arch extender LH 62064-6GA0A PROTECTOR-FRONT BUMPER - Arch extender RH 62077-6GA0A MOULDING-FRONT BUMPER,LH - Side insert trim 62076-6GA0A MOULDING-FRONT BUMPER,RH - Side insert trim 62087-6GA0A MOULDING-FRONT BUMPER,LH - Red insert 62086-6GA0A MOULDING-FRONT BUMPER,RH - Red insert 62022-6GA2H FASCIA-FRONT BUMPER Skirts: 76850-6GA0H PROTECTOR-BODY SIDE SILL,RH 76851-6GA0H PROTECTOR-BODY SIDE SILL,LH Rear: 76748-6GA0A PROTECTOR-REAR WHEEL HOUSE,RH - Arch liner 76749-6GA0A PROTECTOR-REAR WHEEL HOUSE,LH - Arch liner 85022-6GA2H FASCIA-REAR BUMPER - £364.38 (Note: dealer thought part number was 85022-6GA2H) 85010-6GA0A COVER-REAR BUMPER - Tow cover 85249-1EA2A RETAINER-REAR BUMPER,LOWER - Rear bumper lower retainer (not sure if required).

03-23-2016, 08:10 AM	#792 (permalink)
too tall Base Member Join Date: Jan 2016 Location: UK Posts: 30 Drives: 370Z GT Edition Rep Power: 9	Final badge arrived today. Full house!

03-23-2016, 02:20 PM	#794 (permalink)
sipar69 Base Member Join Date: Apr 2013 Location: UK Posts: 3 Drives: 370Z Rep Power: 12	Hi This is my first post although I've been lurking around and getting great tips from here for some time. I'm in the UK and I have the earlier version of the 370Z Nismo. I'm interested in converting to the later version's front bumper. I've checked this thread and I'm not sure if anyone over here has done the same thing? If so, it would be great to see a picture and hear about any issues that came up. Thanks

03-23-2016, 02:28 PM	#795 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,966 Drives: 14 PW 370Z S/T MT Rep Power: 243722	Once you pull the earlier Nismo kit of your car, the conversion is no different then what you have seen in this thread. You'll need a different under-tray as yours will not work. Unless you cut it up I guess. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] 2015 front bumper	jewnbug	Parts for sale (Private Classifieds)	23	09-09-2015 08:29 PM
[FOR SALE] 2009/2012 Nismo front bumper	Count Maddox	Parts for sale (Private Classifieds)	18	05-09-2014 02:52 PM
[WTB] 2009-2013 nismo front bumper cover.	deuce189	Parts for sale (Private Classifieds)	0	11-21-2013 11:50 PM
Base/Sport to Nismo conversion/FRONT BUMPER Cost breakdown	370zFORme!!	DIY Section (Do-It-Yourself)	19	02-11-2013 01:41 PM
2009 nismo front bumper	ocean.mirage	Exterior & Interior	6	07-30-2010 11:31 AM