2015 Nismo Bumper on 2009 Sport possible?

martin82 · 10-10-2014, 11:38 AM

With the bumpers being so cheap doubt any will make it. No one mentioned but each sideskirts is $$$$$$$

lesper4 · 10-10-2014, 11:38 AM

I think the price is already reasonable? The only thing that is not are the DRL.

aszyd · 10-10-2014, 12:14 PM

I would rather buy new liners than go with a non-oem bumper. This thing snaps right into place, no fancy body work necessary to get everything to line up.

I'm still waiting on the call from the body shop. I suspect it is taking quite a while to get that rear bumper.

Nick M · 10-10-2014, 04:09 PM

Quote:

Originally Posted by lesper4

I think the price is already reasonable? The only thing that is not are the DRL.

Well the DRL is a part of the overall package, no? The bumper skin itself isnt the end of the world.

That was my initial point. The DRL makes the overall cost too much for me. I dont care to have or need the DRL on my '09. Its burning $ for the sake of burning $.

If there was a bumper with no DRL, but otherwise identical, I would be all over it.

martin82 · 10-10-2014, 04:37 PM

just have your body shop fill it up np

ufoz8mycow · 10-23-2014, 10:55 PM

Anybody got one of these with the leds installed as well yet?

370z209 · 11-03-2014, 07:43 PM

Anyone have the paint code for the blackish painted area?

martin82 · 11-03-2014, 08:51 PM

rear bumper is installed, the bumper bracket is exactly the same, no need to upgrade, the mud guards are bit off but not worth bothering, you can tuck them in pretty good.

Front bumper we had an issue, so wont have it for a while. Front red pieces will be dropped off to make a mold.

lesper4 · 11-06-2014, 11:38 AM

Quote:

Originally Posted by martin82

Yes the front red pieces come like that. CF is already in the works

Martin the DRY LED is water under the bridge. SO what is the story with the carbon fiber inserts?

Has anyone else done this conversion?

martin82 · 11-06-2014, 01:30 PM

After Super Lap Battle on Nov 14th, I will be free to get more going, we are currently 3d scanning the older nismo model, fenders etc for some new designs, eventually we will have the new front bumper 3d scanned as well.
We are probably looking at about 2 weeks until the mold is ready for the CF inserts, now the question is do we just want to go ahead and extend them an extra .5 or 1" or so or only replacement. It's either one or the other as it would need 2 molds if not $$

martin82 · 11-06-2014, 01:38 PM

Btw here is the hatch gap vs rear bumper

370z209 · 11-06-2014, 02:21 PM

Quote:

Originally Posted by martin82

rear bumper is installed, the bumper bracket is exactly the same, no need to upgrade, the mud guards are bit off but not worth bothering, you can tuck them in pretty good.

Front bumper we had an issue, so wont have it for a while. Front red pieces will be dropped off to make a mold.

What kind of issue did you have with the front bumper?

martin82 · 11-06-2014, 02:55 PM

someone dropped it on concrete after painting LOL, so waiting for body guy to come back from out of town to repaint.....

I am going to try and install it with damage will see.

DIGItonium · 11-06-2014, 03:10 PM

Ah... that gap. So that NISMO spoiler extends down to the edge of the trunk lid just to fill this gap, eh? Good to know.

martin82 · 11-06-2014, 03:13 PM

yeah, unless you are that close, I'd say 99% of ppl wont notice, I bought the rear bumper to cut, in a few weeks it will be cut to air out

10-10-2014, 11:38 AM	#227 (permalink)
lesper4 Base Member Join Date: Nov 2013 Location: S. California, Fontana Posts: 231 Drives: 14 370Z BaseCoupe PW Rep Power: 11	I think the price is already reasonable? The only thing that is not are the DRL. Asheth, KaienZ34 and carlitos_370z like this. __________________ 2014 Nissan 370Z base coupe PW-m 2004 Mazda RX-8 grant touring VR-m (sold) 1992 Nissan 240SX/SE MG-m (sold)

10-10-2014, 12:14 PM	#228 (permalink)
aszyd Track Member Join Date: May 2014 Location: Florida Posts: 877 Drives: Magma Red 370z T+S Rep Power: 21	I would rather buy new liners than go with a non-oem bumper. This thing snaps right into place, no fancy body work necessary to get everything to line up. I'm still waiting on the call from the body shop. I suspect it is taking quite a while to get that rear bumper. cooltoy likes this. __________________ Competition Clutch\|Fast Intentions\|Maxbore\|NST\|Setrab\|Stillen\|Tomei\|Uprev\| Z1 Avant Garde\|SPC\|Stance\|Whiteline Aerojacket\|Seibon\|Tanabe\|TRS\|TWM

11-03-2014, 07:43 PM	#232 (permalink)
370z209 Base Member Join Date: May 2014 Location: Bay Area Posts: 114 Drives: 2015 S4, 2015 A3 Rep Power: 11	Anyone have the paint code for the blackish painted area? __________________ MEISTERSCHAFT \| SWIFT \| SPL \| WORK\| NISMO \| PROJECT KICS\| AEROJACKET Soon to be for sale: - Muteki 32901N Neon Chrome SR48 Open End and Locking Lug Nuts - Forgestar F14 19" 19x9 ET=21 Semi Concave 19x11 ET=24 Deep Concave

11-03-2014, 08:51 PM	#233 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	rear bumper is installed, the bumper bracket is exactly the same, no need to upgrade, the mud guards are bit off but not worth bothering, you can tuck them in pretty good. Front bumper we had an issue, so wont have it for a while. Front red pieces will be dropped off to make a mold. Asheth and KaienZ34 like this.

11-06-2014, 01:30 PM	#235 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	After Super Lap Battle on Nov 14th, I will be free to get more going, we are currently 3d scanning the older nismo model, fenders etc for some new designs, eventually we will have the new front bumper 3d scanned as well. We are probably looking at about 2 weeks until the mold is ready for the CF inserts, now the question is do we just want to go ahead and extend them an extra .5 or 1" or so or only replacement. It's either one or the other as it would need 2 molds if not $$ carlitos_370z likes this.

10-10-2014, 11:38 AM	#226 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	With the bumpers being so cheap doubt any will make it. No one mentioned but each sideskirts is $$$$$$$

10-10-2014, 04:37 PM	#230 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	just have your body shop fill it up np

10-23-2014, 10:55 PM	#231 (permalink)
ufoz8mycow Track Member Join Date: Mar 2012 Location: Vegas Posts: 536 Drives: Black Cherry '12 Z Rep Power: 16	Anybody got one of these with the leds installed as well yet?

11-06-2014, 01:38 PM	#236 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	Btw here is the hatch gap vs rear bumper DIGItonium, carlitos_370z and Ghostvette like this.

11-06-2014, 02:55 PM	#238 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	someone dropped it on concrete after painting LOL, so waiting for body guy to come back from out of town to repaint..... I am going to try and install it with damage will see.

11-06-2014, 03:10 PM	#239 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 42	Ah... that gap. So that NISMO spoiler extends down to the edge of the trunk lid just to fill this gap, eh? Good to know. __________________

11-06-2014, 03:13 PM	#240 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	yeah, unless you are that close, I'd say 99% of ppl wont notice, I bought the rear bumper to cut, in a few weeks it will be cut to air out

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] 2015 front bumper	jewnbug	Parts for sale (Private Classifieds)	23	09-09-2015 08:29 PM
[FOR SALE] 2009/2012 Nismo front bumper	Count Maddox	Parts for sale (Private Classifieds)	18	05-09-2014 02:52 PM
[WTB] 2009-2013 nismo front bumper cover.	deuce189	Parts for sale (Private Classifieds)	0	11-21-2013 11:50 PM
Base/Sport to Nismo conversion/FRONT BUMPER Cost breakdown	370zFORme!!	DIY Section (Do-It-Yourself)	19	02-11-2013 01:41 PM
2009 nismo front bumper	ocean.mirage	Exterior & Interior	6	07-30-2010 11:31 AM