2015 Nismo Bumper on 2009 Sport possible?

KaienZ34 · 09-12-2014, 03:36 PM

Quote:

Originally Posted by MACSIMIZER

Its posted on their facebook page.

Quote:

Originally Posted by Prototyper5

I can make the front wing pieces out of CF or any laminate for that matter. I will have to see how they are attached, convert the wing pieces into plugs and make molds. Basically I will make complete CF replacements, either with prepreg 1k plain weave or 2k twill CF, raw or clear gel coated,etc..Not wrapped or overlayed originals parts. I'm going to be ordering the '15 NISMO kit in a few weeks from Juan in the vendor section for my own car and also to prototype new items. This sounds like something I can make relatively easily. If they're is enough interest you guys won't have to worry, I'll just make them. Pricing would be up in the air until I can see the original in person and see how they mount exactly. Anyways,not trying to thread jack,cheers'

~Reagan

Cool deal, I can't wait to see the finished product. You can kind of see how the red pieces clip in with the Z1 pic above.

Prototyper5 · 09-12-2014, 05:46 PM

Quote:

Originally Posted by KaienZ34

Cool deal, I can't wait to see the finished product. You can kind of see how the red pieces clip in with the Z1 pic above.

Yeah no worries, I see the receiving mounts but it still is always better to have the actual insert (which I bet you know already

but either way from the looks of that pic, I most likely will be doing a direct clone/copy of the originals and a "Race" version too. For me actions speak louder than words so lets just wait 'til I can get my hands on a set of red pieces/winglets

~Reagan

lesper4 · 09-13-2014, 01:28 AM

There is also no reason the CF pieces couldn't just be doubled sided taped in place?

Prototyper5 · 09-13-2014, 09:37 AM

Quote:

Originally Posted by lesper4

There is also no reason the CF pieces couldn't just be doubled sided taped in place?

Well, if they can be bolted on rather than double sided taped it would give the end user more security/piece of mind knowing they can't just "fly off". This is only because they would be replacement parts, not covers.

~Reagan

Asheth · 09-13-2014, 05:21 PM

From the photoshop thread. Cooltoy working magic on my Z. The request was the new bumper CF inserts instead of DRL's and The red pieces being CF Twill pattern. I'm thinking evo-r side blades will go perfect with this fascia.

All praises be to cooltoy

Quote:

Originally Posted by cooltoy

lesper4 · 09-15-2014, 10:11 AM

my thoughts exactly!

aszyd · 09-16-2014, 09:29 PM

My bumper and red inserts will be delivered Thursday! I love that Z1 is in Georgia. I'll need to source the other "mounts" though. I'm debating trying to wrap CF, or just have them painted gloss black when I get the rest of the bumper done.

martin82 · 09-17-2014, 02:02 AM

My front and rear bumper shipped but the front red pieces haven't been shipped yet, as soon as I get them they will be molded within days!!

370Zena_33 · 09-17-2014, 01:09 PM

where did you guys find this bumper on z1 motorsports website, i cant find it.

martin82 · 09-17-2014, 01:18 PM

Call them to order and get pricing.

martin82 · 09-17-2014, 02:47 PM

My front and rear bumper arrives Monday, hopefully the front pieces come in ASAP!!

Jordo! · 09-17-2014, 03:02 PM

Quote:

Originally Posted by Prototyper5

I can make the front wing pieces out of CF or any laminate for that matter. I will have to see how they are attached, convert the wing pieces into plugs and make molds. Basically I will make complete CF replacements, either with prepreg 1k plain weave or 2k twill CF, raw or clear gel coated,etc..Not wrapped or overlayed originals parts. I'm going to be ordering the '15 NISMO kit in a few weeks from Juan in the vendor section for my own car and also going to prototype new items with them using my Z. This sounds like something I can make relatively easy. If there is enough interest you guys won't have to worry, I'll just make them. Pricing would be up in the air until I can see the original in person and see how they mount exactly. Anyways,not trying to thread jack,cheers'

~Reagan

Any chance you might make some FRP ones as well?

And an open question to everyone: Has anyone figured out a solution for the DRL's other than buying the very expensive Nissan parts?

Could something be done using LED strips?

EDIT: Canard type inserts is a great idea!

KaienZ34 · 09-17-2014, 03:05 PM

The places I've talked with said they need to have the bumper on hand to make or get some led's that fit.

martin82 · 09-17-2014, 03:15 PM

If you know anyone near Los Angeles they can work on my bumper np... before I cut it all UP lol.

lesper4 · 09-17-2014, 05:21 PM

I am checking with some friends. What about Status Autoworks in Gardena? Not sure if they do (electrical) fabrication. They do wraps and body kits.
https://www.facebook.com/profile.php...236178&fref=ts

09-13-2014, 01:28 AM	#123 (permalink)
lesper4 Base Member Join Date: Nov 2013 Location: S. California, Fontana Posts: 231 Drives: 14 370Z BaseCoupe PW Rep Power: 11	There is also no reason the CF pieces couldn't just be doubled sided taped in place? __________________ 2014 Nissan 370Z base coupe PW-m 2004 Mazda RX-8 grant touring VR-m (sold) 1992 Nissan 240SX/SE MG-m (sold)

09-15-2014, 10:11 AM	#126 (permalink)
lesper4 Base Member Join Date: Nov 2013 Location: S. California, Fontana Posts: 231 Drives: 14 370Z BaseCoupe PW Rep Power: 11	my thoughts exactly! __________________ 2014 Nissan 370Z base coupe PW-m 2004 Mazda RX-8 grant touring VR-m (sold) 1992 Nissan 240SX/SE MG-m (sold)

09-16-2014, 09:29 PM	#127 (permalink)
aszyd Track Member Join Date: May 2014 Location: Florida Posts: 877 Drives: Magma Red 370z T+S Rep Power: 21	My bumper and red inserts will be delivered Thursday! I love that Z1 is in Georgia. I'll need to source the other "mounts" though. I'm debating trying to wrap CF, or just have them painted gloss black when I get the rest of the bumper done. __________________ Competition Clutch\|Fast Intentions\|Maxbore\|NST\|Setrab\|Stillen\|Tomei\|Uprev\| Z1 Avant Garde\|SPC\|Stance\|Whiteline Aerojacket\|Seibon\|Tanabe\|TRS\|TWM

09-17-2014, 02:02 AM	#128 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	2015 Nismo Bumper on 2009 Sport possible? My front and rear bumper shipped but the front red pieces haven't been shipped yet, as soon as I get them they will be molded within days!! KaienZ34, lesper4 and Aviator44 like this.

09-17-2014, 03:05 PM	#133 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 178	The places I've talked with said they need to have the bumper on hand to make or get some led's that fit. __________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

09-17-2014, 01:09 PM	#129 (permalink)
370Zena_33 Base Member Join Date: Oct 2013 Location: Charlton,ma Posts: 13 Drives: 2012 Nissan 370z Rep Power: 12	where did you guys find this bumper on z1 motorsports website, i cant find it.

09-17-2014, 01:18 PM	#130 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	Call them to order and get pricing.

09-17-2014, 02:47 PM	#131 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	My front and rear bumper arrives Monday, hopefully the front pieces come in ASAP!!

09-17-2014, 03:15 PM	#134 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	If you know anyone near Los Angeles they can work on my bumper np... before I cut it all UP lol.

09-17-2014, 05:21 PM	#135 (permalink)
lesper4 Base Member Join Date: Nov 2013 Location: S. California, Fontana Posts: 231 Drives: 14 370Z BaseCoupe PW Rep Power: 11	I am checking with some friends. What about Status Autoworks in Gardena? Not sure if they do (electrical) fabrication. They do wraps and body kits. https://www.facebook.com/profile.php...236178&fref=ts __________________ 2014 Nissan 370Z base coupe PW-m 2004 Mazda RX-8 grant touring VR-m (sold) 1992 Nissan 240SX/SE MG-m (sold)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] 2015 front bumper	jewnbug	Parts for sale (Private Classifieds)	23	09-09-2015 08:29 PM
[FOR SALE] 2009/2012 Nismo front bumper	Count Maddox	Parts for sale (Private Classifieds)	18	05-09-2014 02:52 PM
[WTB] 2009-2013 nismo front bumper cover.	deuce189	Parts for sale (Private Classifieds)	0	11-21-2013 11:50 PM
Base/Sport to Nismo conversion/FRONT BUMPER Cost breakdown	370zFORme!!	DIY Section (Do-It-Yourself)	19	02-11-2013 01:41 PM
2009 nismo front bumper	ocean.mirage	Exterior & Interior	6	07-30-2010 11:31 AM