The Varis Arising-II kit is growing on me

damian_mb · 09-11-2014, 10:41 AM

The front and rear is too busy, imo.

1slow370 · 09-11-2014, 05:07 PM

Quote:

Originally Posted by Arrvaxx

Oh DEpointfiveO. If I had a nickle for everything you thought was rice.

You'd be a rich man but he would still be callin it like it is. I guaranty 90% of those fins and vents do nothing but multiply the CD not to mention make it look "oh so rice" .

ZeroZeta · 09-11-2014, 09:05 PM

Can anyone confirm if the led housings on the Arising II can accommodate oem 2013 plus LED drls?

I really hope so or else I may end up with another set of vents to help air out my rice.

cooltoy · 09-11-2014, 09:08 PM

It looks to be exact same shape and size from the pics.

OMGWTFBBQ · 09-11-2014, 09:13 PM

I think my favorite piece is the VSDC cooling bonnet. I absolutely LOVE mine and it's awesome how both sides (top and bottom) are all carbon. Not to mention that it fit perfectly and is super light compared to the stock hood.

ZeroZeta · 09-11-2014, 09:20 PM

Yeah I was thinking the same thing but wasn't sure if anyone had gotten that far with their install yet.

I liked the DRLs on the new models, but didn't care for the defanged bumper. I ended up going with this front in the hopes of keeping them and wanting something a bit more aggressive than the lip kits. My other alternative was the Fujimura front. Will be curious to see photos once everyone is out of paint. This is one kit that I think will look better on darker cars.

cooltoy · 09-11-2014, 09:48 PM

cooltoy · 09-11-2014, 09:49 PM

I like the fenders. Not sure about the bump on top though.

cooltoy · 09-11-2014, 09:58 PM

http://www.varis.co.jp/varis/2014aut.../pdf/pdf04.pdf

cooltoy · 09-11-2014, 10:03 PM

Quote:

Originally Posted by ZeroZeta

Yeah I was thinking the same thing but wasn't sure if anyone had gotten that far with their install yet.

I liked the DRLs on the new models, but didn't care for the defanged bumper. I ended up going with this front in the hopes of keeping them and wanting something a bit more aggressive than the lip kits. My other alternative was the Fujimura front. Will be curious to see photos once everyone is out of paint. This is one kit that I think will look better on darker cars.

Read the part below the images. The way I interpret that if you car is 2013-2014, you move DRLs from your stock bumper to the Varis bumper, if your car is pre 2013 then you have to buy new ones (unless you purchase the bumper with air ducts in place of the lights).

http://autostyle-usa.com/z34/VRS20341112B01/

da mayor · 09-12-2014, 01:07 AM

that looks amazing in White

1slow370 · 09-12-2014, 02:49 AM

Quote:

Originally Posted by ZeroZeta

Can anyone confirm if the led housings on the Arising II can accommodate oem 2013 plus LED drls?

I really hope so or else I may end up with another set of vents to help air out my rice.

the problem with all the extra vents is that they aren't terribly well thought out most of the time. We tend to equate more and bigger vents with more airflow but that isn't the case. Like bigger front openings, if you make the hole in the front of the bumper too large all you end up with is a larger high pressure zone in the front of the car if the air can't get OUT of the engine bay. Most of the time the way people get air out of the engine bay is by venting the hood, which can be a good and bad if done wrong, if you're hood vents are too large you can end up decreasing the airflow out the back of the engine bay which cools the exhaust and firewall which for you turbo guys can lead to increased fire risk depending on where your' lines are and how close stuff is. the grand am teams use the nismo bumper because it is longer and sleeker and has a lower profile air inlet which reduces high speed drag on the car. The inlet is big enough to cool the motor at high speeds while being small enough to keep a high CD look at the actual grill opening on the corvette. Scoops in the sideskirts that don't go anywhere or cool anything, vents way up above the trunk line on the rear bumper that vent sheetmetal, fender vents that only work without the fender liners in place(the fender liners do more for wheel well aero than the vent does) these are the things that make all these ridicu-vented JDM kits rice-Race Inspired Cosmetic Enhancements.

SS_Firehawk · 09-12-2014, 02:50 AM

I waaaaas gonna say remove the crap in the middle of the front bumper and this would be 100% money, but everyone else thought the same thing lol. With all the stuff in the middle, it's 70% money.

Arrvaxx · 09-12-2014, 10:10 AM

Quote:

Originally Posted by 1slow370

the problem with all the extra vents is that they aren't terribly well thought out most of the time. We tend to equate more and bigger vents with more airflow but that isn't the case. Like bigger front openings, if you make the hole in the front of the bumper too large all you end up with is a larger high pressure zone in the front of the car if the air can't get OUT of the engine bay. Most of the time the way people get air out of the engine bay is by venting the hood, which can be a good and bad if done wrong, if you're hood vents are too large you can end up decreasing the airflow out the back of the engine bay which cools the exhaust and firewall which for you turbo guys can lead to increased fire risk depending on where your' lines are and how close stuff is. the grand am teams use the nismo bumper because it is longer and sleeker and has a lower profile air inlet which reduces high speed drag on the car. The inlet is big enough to cool the motor at high speeds while being small enough to keep a high CD look at the actual grill opening on the corvette. Scoops in the sideskirts that don't go anywhere or cool anything, vents way up above the trunk line on the rear bumper that vent sheetmetal, fender vents that only work without the fender liners in place(the fender liners do more for wheel well aero than the vent does) these are the things that make all these ridicu-vented JDM kits rice-Race Inspired Cosmetic Enhancements.

In a lot of cases I might agree. However if you add the fenders and hood I think it is balanced just fine. I was going to skip the fenders until I realize that the top vents are likely functional. Either way I plan on making them all functional. The interestiong part will be making the side bumper vents work with a brake cooling system.

Angermiester · 09-12-2014, 10:48 AM

There is just wayyyy too much happening there.

09-11-2014, 09:08 PM	#94 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,971 Drives: 14 PW 370Z S/T MT Rep Power: 243722	It looks to be exact same shape and size from the pics. ZeroZeta likes this. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang. Last edited by cooltoy; 09-11-2014 at 09:44 PM.

09-11-2014, 09:13 PM	#95 (permalink)
OMGWTFBBQ A True Z Fanatic Join Date: Jan 2009 Location: the OC Posts: 1,886 Drives: 08 SGM IS350 Rep Power: 4549	I think my favorite piece is the VSDC cooling bonnet. I absolutely LOVE mine and it's awesome how both sides (top and bottom) are all carbon. Not to mention that it fit perfectly and is super light compared to the stock hood. GaleForce, ZeroZeta and SNSD YOONA like this. __________________ Zele Performance \| Varis \| Powerhouse Amuse \| Craftsquare \| Tommy Kaira \| Top Secret \| HKS \| Defi \| Volk Racing \| Cusco \| SPL \| Never ending build thread.. PM me if you have rare JDM parts for sale!

09-11-2014, 09:48 PM	#97 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,971 Drives: 14 PW 370Z S/T MT Rep Power: 243722	__________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

09-11-2014, 09:49 PM	#98 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,971 Drives: 14 PW 370Z S/T MT Rep Power: 243722	I like the fenders. Not sure about the bump on top though. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

09-11-2014, 09:58 PM	#99 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,971 Drives: 14 PW 370Z S/T MT Rep Power: 243722	http://www.varis.co.jp/varis/2014aut.../pdf/pdf04.pdf __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

09-11-2014, 10:41 AM	#91 (permalink)
damian_mb Base Member Join Date: Jul 2013 Location: MN Posts: 213 Drives: 12 370z / 13 WRX Rep Power: 12	The front and rear is too busy, imo.

09-11-2014, 09:05 PM	#93 (permalink)
ZeroZeta Track Member Join Date: Aug 2013 Location: Austin TX Posts: 543 Drives: 2013 Z Rep Power: 13	Can anyone confirm if the led housings on the Arising II can accommodate oem 2013 plus LED drls? I really hope so or else I may end up with another set of vents to help air out my rice.

09-11-2014, 09:20 PM	#96 (permalink)
ZeroZeta Track Member Join Date: Aug 2013 Location: Austin TX Posts: 543 Drives: 2013 Z Rep Power: 13	Yeah I was thinking the same thing but wasn't sure if anyone had gotten that far with their install yet. I liked the DRLs on the new models, but didn't care for the defanged bumper. I ended up going with this front in the hopes of keeping them and wanting something a bit more aggressive than the lip kits. My other alternative was the Fujimura front. Will be curious to see photos once everyone is out of paint. This is one kit that I think will look better on darker cars.

09-12-2014, 01:07 AM	#101 (permalink)
da mayor Enthusiast Member Join Date: Dec 2009 Location: Long Island, NY Posts: 313 Drives: #TheGoldenZ Rep Power: 15	that looks amazing in White __________________ #TheGoldenZ [GTSPEC][RAVSPEC][AutoVisionNY][631Coatings vinylwrapped][Evo-R][SoFreshLifestyle][Intrack Tires][Project Mu][MXP][HempsteadAutoCollision][SNTRL]

09-12-2014, 02:50 AM	#103 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	I waaaaas gonna say remove the crap in the middle of the front bumper and this would be 100% money, but everyone else thought the same thing lol. With all the stuff in the middle, it's 70% money. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

09-12-2014, 10:48 AM	#105 (permalink)
Angermiester Base Member Join Date: Mar 2013 Location: Plano Posts: 85 Drives: 13 370z blk t/s pkg Rep Power: 12	There is just wayyyy too much happening there. __________________ UpRev \| Stillen \| Swift \| H&R \| Z1 \| EVO-R \| Topspeed \| Hawk \| Cusco \| Carbon Signal

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
13-14 Varis Lip GB!!!	NuGen Auto	Group Buys	36	03-06-2016 08:12 PM
Varis in Black	370Ztune	Nissan 370Z Photos / Spyshots / Video / Media Gallery	56	12-07-2015 12:57 PM
Does anyone know whose car this is? Varis and Amuse.	cooltoy	Exterior & Interior	31	07-30-2012 01:46 AM
NEW Varis Aero!!!	370Ztune	Exterior & Interior	117	01-13-2012 01:22 PM