Carbon fiber amuse install help needed

cooltoy · 11-16-2014, 04:34 PM

I will not be at that point for a few month yet, so if you are willing to wait that long, I will take pics.

cooltoy · 11-18-2014, 12:16 AM

Quote:

Originally Posted by TaiShu

Hi can anyone post pic of where to cut on the oem splash guard go get the amuse front bumper to fit?

From this post, it does not look like you need to cut anything.

See Simotas post #6.

Help if you have amuse front bumper!

Some confusing info there, some say cut others say don't.

pfdaxe · 11-18-2014, 09:25 AM

Quote:

Originally Posted by cooltoy

From this post, it does not look like you need to cut anything.

See Simotas post #6.

Help if you have amuse front bumper!

Some confusing info there, some say cut others say don't.

I had to cut a good couple of inches off the bottom of the fender liners. There was no way there were even close to fitting without cutting.

wheee! · 11-18-2014, 10:51 AM

Quote:

Originally Posted by pfdaxe

I had to cut a good couple of inches off the bottom of the fender liners. There was no way there were even close to fitting without cutting.

So much effort in cutting and fitting with this version of Amuse replica.... should have got the Duraflex version; it bolts right up!

( Click to show/hide )

pfdaxe · 11-18-2014, 11:30 AM

Quote:

Originally Posted by wheee!

So much effort in cutting and fitting with this version of Amuse replica.... should have got the Duraflex version; it bolts right up!

( Click to show/hide )

LOL...Riiiight.

cooltoy · 11-18-2014, 12:15 PM

Quote:

Originally Posted by wheee!

So much effort in cutting and fitting with this version of Amuse replica.... should have got the Duraflex version; it bolts right up!

( Click to show/hide )

You still want to trade?

MattyIce370z · 04-18-2023, 02:36 PM

Quote:

Originally Posted by cooltoy

I think I am going to use my 2014 DRLs. The vents in the front will cover the silver edging of the lights, but the lights themselves will shine through. Also the top light will be covered, but who cares if it is inside the bumper, there will still be three open. At least those are my initial thoughts.

Super old post coming back from the dead.
I myself was thinking the same since I have a Shine Auto Amuse Front.
Did you ever get around to making them fit/fabricate something to make them hold in place?

cooltoy · 04-18-2023, 11:18 PM

The OEM wil not fit on the passenger side due to the washer fluid bottle.

I bought some Osram aftermarket DRLs and the body shop build the brackets to hold them. I don't think Osram makes the ones I installed anymore, but all you have to find is something just big enough to fit into the vent. Mine are actually a touch short for the front vents, but it is not noticeable behind the mesh.

http://www.the370z.com/attachments/e...e-img_0765.jpg

MattyIce370z · 04-19-2023, 12:55 AM

Thank you for the response! I like how they turned out!

cooltoy · 04-19-2023, 11:14 AM

Anytime.

11-16-2014, 04:34 PM	#106 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,971 Drives: 14 PW 370Z S/T MT Rep Power: 243722	I will not be at that point for a few month yet, so if you are willing to wait that long, I will take pics. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

04-18-2023, 11:18 PM	#113 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,971 Drives: 14 PW 370Z S/T MT Rep Power: 243722	The OEM wil not fit on the passenger side due to the washer fluid bottle. I bought some Osram aftermarket DRLs and the body shop build the brackets to hold them. I don't think Osram makes the ones I installed anymore, but all you have to find is something just big enough to fit into the vent. Mine are actually a touch short for the front vents, but it is not noticeable behind the mesh. http://www.the370z.com/attachments/e...e-img_0765.jpg sx moneypit likes this. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang. Last edited by cooltoy; 04-18-2023 at 11:48 PM.

04-19-2023, 11:14 AM	#115 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,971 Drives: 14 PW 370Z S/T MT Rep Power: 243722	Anytime. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Amuse carbon fiber body kit	nomodsjk	Exterior & Interior	3	07-16-2014 04:49 AM
Amuse Style wing, Full Carbon Fiber,Fiber Glass	AeroJacket	Body Interior/Exterior	34	07-10-2014 02:34 AM
FS: Carbon Fiber Amuse Kit	docaam	Parts for sale (Private Classifieds)	26	01-31-2011 12:01 PM
Local 370z needed for carbon fiber test fitting !	Carbon370z	Southern California Region	6	08-25-2009 01:32 AM

04-19-2023, 12:55 AM	#114 (permalink)
MattyIce370z Base Member Join Date: Jul 2018 Location: Austin, Tx Age: 29 Posts: 9 Drives: ‘14 370 Sport Rep Power: 7	Thank you for the response! I like how they turned out!