Carbon fiber amuse install help needed

nomodsjk · 08-05-2014, 04:29 PM

Quote:

Originally Posted by 6MT-Z34

Curious....where did you get the side skirt plates and how much if u don't mind sharing? I plan on doing the amuse kit on the far future but I'm reading a lot so I know I have everything I need when I do

Fly1 Motorsports hit him up. Good guy good product good price

pfdaxe · 08-05-2014, 04:52 PM

I'm in the process of mounting my Shine Auto Amuse front and it fit right on with no issues. Only mod I had to do was trim a bit to clear my aftermarket oil cooler. I also had to enlarge the hole on the skid plate for oil changes. Both took less than 5 minutes. No other body modifications, trimming or anything else needed. Rear fit the same. Unbolt the old, install the new. As for the rear license plate, I just used a thin license plate mounting bracket and attached directly to the rear. No custom fab work needed. I think if you have a quality kit, you have very little to adjust or mod. The Shine kit also has the marks on the skid plate to drill the bolt holes. Now, my BSD side skirts were another thing. Horribly fit and took a lot of work:

wheee! · 08-05-2014, 05:03 PM

From the looks of your bumper, it fit about the same as mine. The slight wave and gap at the fender edge in your picture tells me that a body shop would probably find a thing or two to tweak. It's one thing to eyeball it, it's another to run a blocker over it after priming...

That being said, I have heard nothing but good things overall about the Shine kit!

wheee! · 08-05-2014, 05:06 PM

Quote:

Originally Posted by cooltoy

It would be great if someone put together a thread on what it takes to properly put an Amuse kit on. Kind of like tjlazer di for the Nismo conversion.

That could be depressing...

Riptide67 · 08-05-2014, 05:15 PM

Quote:

Originally Posted by pfdaxe

I'm in the process of mounting my Shine Auto Amuse front and it fit right on with no issues. Only mod I had to do was trim a bit to clear my aftermarket oil cooler. I also had to enlarge the hole on the skid plate for oil changes. Both took less than 5 minutes. No other body modifications, trimming or anything else needed. Rear fit the same. Unbolt the old, install the new. As for the rear license plate, I just used a thin license plate mounting bracket and attached directly to the rear. No custom fab work needed. I think if you have a quality kit, you have very little to adjust or mod. The Shine kit also has the marks on the skid plate to drill the bolt holes. Now, my BSD side skirts were another thing. Horribly fit and took a lot of work:

Please do not take this as a knock...I absolutely do not intend it that way and its my own personal opinion.

I would not be satisfied with the way your front fits. It is great that you did it yourself and saved a lot of money (props). You are also working with a flexible material. CF is not flexible by any means...especially when dealing with very large body panels. I take my cars to shows and judges have remarked that the fitment looks OEM and like it rolled off a production line. That is something that I can be proud of and makes a 3k bill worth it. Can I attest to it being the kit....possibly. Was it the hard work and finesse of the body shop knowing this is a show car....more than likely. Every kit has flaws. Those flaws can be hidden and tweaked with the skills and experience of people who have been doing the **** forever.

wheee! · 08-05-2014, 05:32 PM

An example of some of the work done to mine...

And most of that looked just fine to me until it was primed and blocked...

wheee! · 08-05-2014, 05:33 PM

And after....

Riptide67 · 08-05-2014, 05:43 PM

I wish I still had all the pictures of the custom brackets and molding that went into mine. The side skirts were the biggest PITA for the body shop. IOS 7.1 caused me to lose everything and that is one of the reasons I ditched Apple for Samsung.

wheee! · 08-05-2014, 05:45 PM

Quote:

Originally Posted by Riptide67

I wish I still had all the pictures of the custom brackets and molding that went into mine. The side skirts were the biggest PITA for the body shop. IOS 7.1 caused me to lose everything and that is one of the reasons I ditched Apple for Samsung.

hence the reason you don't see my skirts in these pictures....

They are on now, but what a pain and mine were just covers!

wheee! · 08-05-2014, 05:47 PM

This one shows the area customized for the lights and hatch release.... most of which I fabbed myself.

cooltoy · 08-05-2014, 05:58 PM

Subbed.

PS. I should take the car up to Edmonton to get it done in the shop you used. I have no idea which place in Calgary to use. Maybe you shop knows of a place in Calgary they would recommend.

wheee! · 08-05-2014, 06:59 PM

My shop specializes in classic rods and restorations. After this kit, they said they were not going to do another FRP or CF body kit! lol

They lost some money on the deal in regards to the time it took, so I don't think they will be the best at recommending a shop. I would say check with the guys in the Alberta GZ Club down there...

cooltoy · 08-05-2014, 08:56 PM

Now I remember you saying that before.

pfdaxe · 08-05-2014, 10:18 PM

Quote:

Originally Posted by Riptide67

Please do not take this as a knock...I absolutely do not intend it that way and its my own personal opinion.

I would not be satisfied with the way your front fits. It is great that you did it yourself and saved a lot of money (props). You are also working with a flexible material. CF is not flexible by any means...especially when dealing with very large body panels. I take my cars to shows and judges have remarked that the fitment looks OEM and like it rolled off a production line. That is something that I can be proud of and makes a 3k bill worth it. Can I attest to it being the kit....possibly. Was it the hard work and finesse of the body shop knowing this is a show car....more than likely. Every kit has flaws. Those flaws can be hidden and tweaked with the skills and experience of people who have been doing the **** forever.

Rip:

I appreciate your feedback brother and agree with most of it. The bumper was just placed on there with only a few clips on top holding it. I wanted to see what and if any large modification it would take to get it to as close to perfection for a weekend driver. After bolting it down, it actually did tighten up the gaps pretty good. I have to adjust it a bit on the drivers side by the fender. I 100% agree that it's hard to compare different types of materials e.g.; FRP, CF etc. This FRP is very forgiving and can be manipulated quiet a bit. Same goes for different brands. I know you have to really work to get a Duraflex kit to fit well versus a Shine or Aero. And the same goes when you try to compare a Shine & Aero with a Powerhouse. I think it comes down to; do you want to pay more for the kit or more for the fabrication. In the end, I think we all win. Great looking rides Rip & wheee! Dropping off bumper for prep & paint... Woo Hoo

cooltoy · 08-05-2014, 10:24 PM

If you can take pics of every step please.

08-05-2014, 04:52 PM	#47 (permalink)
pfdaxe A True Z Fanatic Join Date: Aug 2012 Location: Phoenix, AZ Posts: 1,064 Drives: 09 Touring AT Sport Rep Power: 16	I'm in the process of mounting my Shine Auto Amuse front and it fit right on with no issues. Only mod I had to do was trim a bit to clear my aftermarket oil cooler. I also had to enlarge the hole on the skid plate for oil changes. Both took less than 5 minutes. No other body modifications, trimming or anything else needed. Rear fit the same. Unbolt the old, install the new. As for the rear license plate, I just used a thin license plate mounting bracket and attached directly to the rear. No custom fab work needed. I think if you have a quality kit, you have very little to adjust or mod. The Shine kit also has the marks on the skid plate to drill the bolt holes. Now, my BSD side skirts were another thing. Horribly fit and took a lot of work: wheee!, cooltoy, Riptide67 and 1 others like this. __________________ Build Thread: http://www.the370z.com/members-370z-...xes-build.html

08-05-2014, 05:03 PM	#48 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 57 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40182	From the looks of your bumper, it fit about the same as mine. The slight wave and gap at the fender edge in your picture tells me that a body shop would probably find a thing or two to tweak. It's one thing to eyeball it, it's another to run a blocker over it after priming... That being said, I have heard nothing but good things overall about the Shine kit! Riptide67 likes this. __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal

08-05-2014, 05:32 PM	#51 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 57 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40182	An example of some of the work done to mine... And most of that looked just fine to me until it was primed and blocked... Riptide67 likes this. __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal

08-05-2014, 05:33 PM	#52 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 57 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40182	And after.... pfdaxe and Riptide67 like this. __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal

08-05-2014, 05:43 PM	#53 (permalink)
Riptide67 A True Z Fanatic Join Date: Jul 2013 Location: Oak Harbor, WA Age: 37 Posts: 1,610 Drives: 09 Nismo #0483 PW Rep Power: 69	I wish I still had all the pictures of the custom brackets and molding that went into mine. The side skirts were the biggest PITA for the body shop. IOS 7.1 caused me to lose everything and that is one of the reasons I ditched Apple for Samsung. wheee! likes this. __________________ 2009 Nismo 370Z and 1975 Datsun 280Z 2+2 - PNW_INC - Legacy_Ohana Follow me on Instagam @s3zero_z3four

08-05-2014, 05:47 PM	#55 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 57 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40182	This one shows the area customized for the lights and hatch release.... most of which I fabbed myself. __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal

08-05-2014, 05:58 PM	#56 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,971 Drives: 14 PW 370Z S/T MT Rep Power: 243722	Subbed. PS. I should take the car up to Edmonton to get it done in the shop you used. I have no idea which place in Calgary to use. Maybe you shop knows of a place in Calgary they would recommend. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

08-05-2014, 06:59 PM	#57 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 57 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40182	My shop specializes in classic rods and restorations. After this kit, they said they were not going to do another FRP or CF body kit! lol They lost some money on the deal in regards to the time it took, so I don't think they will be the best at recommending a shop. I would say check with the guys in the Alberta GZ Club down there... cooltoy and Riptide67 like this. __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal

08-05-2014, 08:56 PM	#58 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,971 Drives: 14 PW 370Z S/T MT Rep Power: 243722	Now I remember you saying that before. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

08-05-2014, 10:24 PM	#60 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,971 Drives: 14 PW 370Z S/T MT Rep Power: 243722	If you can take pics of every step please. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Amuse carbon fiber body kit	nomodsjk	Exterior & Interior	3	07-16-2014 04:49 AM
Amuse Style wing, Full Carbon Fiber,Fiber Glass	AeroJacket	Body Interior/Exterior	34	07-10-2014 02:34 AM
FS: Carbon Fiber Amuse Kit	docaam	Parts for sale (Private Classifieds)	26	01-31-2011 12:01 PM
Local 370z needed for carbon fiber test fitting !	Carbon370z	Southern California Region	6	08-25-2009 01:32 AM