Nissan 370Z Forum - Carbon fiber amuse install help needed

Page 8 of 8

Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)

- Exterior & Interior (http://www.the370z.com/exterior-interior/)

- - Carbon fiber amuse install help needed (http://www.the370z.com/exterior-interior/94551-carbon-fiber-amuse-install-help-needed.html)

cooltoy

11-16-2014 03:34 PM

I will not be at that point for a few month yet, so if you are willing to wait that long, I will take pics.

cooltoy

11-17-2014 11:16 PM

Quote:

Originally Posted by TaiShu (Post 3032427)

Hi can anyone post pic of where to cut on the oem splash guard go get the amuse front bumper to fit?

From this post, it does not look like you need to cut anything.

See Simotas post #6.

http://www.the370z.com/exterior-inte...nt-bumper.html

Some confusing info there, some say cut others say don't.

pfdaxe

11-18-2014 08:25 AM

Quote:

Originally Posted by cooltoy (Post 3033606)

From this post, it does not look like you need to cut anything.

See Simotas post #6.

http://www.the370z.com/exterior-inte...nt-bumper.html

Some confusing info there, some say cut others say don't.

I had to cut a good couple of inches off the bottom of the fender liners. There was no way there were even close to fitting without cutting.

wheee!

11-18-2014 09:51 AM

Quote:

Originally Posted by pfdaxe (Post 3033803)

I had to cut a good couple of inches off the bottom of the fender liners. There was no way there were even close to fitting without cutting.

So much effort in cutting and fitting with this version of Amuse replica.... should have got the Duraflex version; it bolts right up! :stirthepot:

( Click to show/hide )

pfdaxe

11-18-2014 10:30 AM

Quote:

Originally Posted by wheee! (Post 3033918)

So much effort in cutting and fitting with this version of Amuse replica.... should have got the Duraflex version; it bolts right up! :stirthepot:

( Click to show/hide )

LOL...Riiiight. ;)

cooltoy

11-18-2014 11:15 AM

Quote:

Originally Posted by wheee! (Post 3033918)

So much effort in cutting and fitting with this version of Amuse replica.... should have got the Duraflex version; it bolts right up! :stirthepot:

( Click to show/hide )

You still want to trade? :stirthepot:

MattyIce370z

04-18-2023 01:36 PM

Quote:

Originally Posted by cooltoy (Post 3027614)

I think I am going to use my 2014 DRLs. The vents in the front will cover the silver edging of the lights, but the lights themselves will shine through. Also the top light will be covered, but who cares if it is inside the bumper, there will still be three open. At least those are my initial thoughts.

Super old post coming back from the dead.
I myself was thinking the same since I have a Shine Auto Amuse Front.
Did you ever get around to making them fit/fabricate something to make them hold in place?

cooltoy

04-18-2023 10:18 PM

The OEM wil not fit on the passenger side due to the washer fluid bottle.

I bought some Osram aftermarket DRLs and the body shop build the brackets to hold them. I don't think Osram makes the ones I installed anymore, but all you have to find is something just big enough to fit into the vent. Mine are actually a touch short for the front vents, but it is not noticeable behind the mesh.

http://www.the370z.com/attachments/e...e-img_0765.jpg

MattyIce370z

04-18-2023 11:55 PM

Thank you for the response! I like how they turned out!

cooltoy

04-19-2023 10:14 AM

Anytime.

All times are GMT -5. The time now is 03:14 PM.

Page 8 of 8

« First

Show 40 post(s) from this thread on one page