Power Steering Reservoir Relocation

Wiggins3377 · 06-16-2014, 10:20 AM

After failing to fabricate the Mishimoto aftermarket reservoir to our car last year and as I begin to work on replicating O&Gs wire tuck, I got to thinking about whether or not it would be possible to relocate the OEM reservoir. That being said has anyone tried it? Does anyone have any suggestions?

The only thing that I keep thinking about (and I haven’t checked to see if it’s even possible yet), Is to make a combo tank with the radiator overflow. I have an aftermarket overflow tank now and I’m wondering if I could do something like the ARC combo can but make the left side a power steering reservoir. Any thoughts? Would there be any restrictions with my idea? What about return lines any issues there?

theDreamer · 06-16-2014, 10:23 AM

In for ideas and results.
I know O&G and jtran produced an aftermarket overflow tank for the radiator combo with catch can. So you might be able to do a similar idea with the PS resevoir.

I have always been interested in moving mine, with my SC one of my lines rubs and has been replaced twice now. So reducing the distance or routing would be excellent!

theDreamer · 06-16-2014, 10:24 AM

Found the picture.

Wiggins3377 · 06-16-2014, 10:25 AM

Yeah I have a overflow tank very similar to that. Mine is just painted.
I'm wondering if I'll run into trouble with the radiator hose.

ImageUploadedByTapatalk1402928721.385346.jpg

Sent from my iPhone using Tapatalk

theDreamer · 06-16-2014, 10:28 AM

Seeing the TS filter covers makes it seem like that might be a tight fit there.
An idea might be to move the overflow tank left or right a bit to free up some space for the PS resevoir.

Also, side note, what catch can setup is that? TS?

Wiggins3377 · 06-16-2014, 10:30 AM

That's a good thought, would there be any issues with having longer lines than OEM going to/ from the reservoir? I don't know much about how it works. Any insight there would be helpful.

Yeah, they are Top Secret catch cans.

theDreamer · 06-16-2014, 10:32 AM

I know one of my lines is a little longer from the SC setup and I can hear a little noise from the pump working harder.
I don't know all the ins/outs of the fluid v the pump. I am sure at some point the pump would be working to much to move the fluid and cause problems.

Wiggins3377 · 06-16-2014, 10:33 AM

I wonder if it's possible to make a small can that fits under the intake filter... Hmmm

Thanks for the input Dreamer, ill definitely look into the length of the lines. I assume if there is a way to make them shorter that's a benefit??

If anyone else wants to chime in it would be appreciated.

Sent from my iPhone using Tapatalk

MyKindaGuise · 06-16-2014, 12:43 PM

Quote:

Originally Posted by Wiggins3377

After failing to fabricate the Mishimoto aftermarket reservoir to our car last year and as I begin to work on replicating O&Gs wire tuck, I got to thinking about whether or not it would be possible to relocate the OEM reservoir. That being said has anyone tried it? Does anyone have any suggestions?

I relocated mine to the other side. Nothing crazy but it declutters things nicely...also better temps being away from turbo.

Wiggins3377 · 06-16-2014, 12:46 PM

Quote:

Originally Posted by MyKindaGuise

I relocated mine to the other side. Nothing crazy but it declutters things nicely...also better temps being away from turbo.

Interesting, you clearly needed the space on the other side

.

And pics of how you ran the hose? Any pump issues?

MyKindaGuise · 06-16-2014, 12:48 PM

Quote:

Originally Posted by Wiggins3377

Interesting, you clearly needed the space on the other side

.

And pics of how you ran the hose? Any pump issues?

I can take some later...it isn't too clean basically zip tied to the back side of the one fan to keep it away from any belt action.lol No issues so far other than I need to remake my pump inlet as it is leaking ever so slightly.

Wiggins3377 · 06-16-2014, 12:50 PM

I figured you may have done that route. Any pics would be appreciated. I think Im going to try my one of my two ideas. Although I like the thought of splitting the overflow tank, Im leaning towards seeing if I can fit a small tank under the intake filters.

MyKindaGuise · 06-16-2014, 12:53 PM

Quote:

Originally Posted by Wiggins3377

I figured you may have done that route. Any pics would be appreciated. I think Im going to try my one of my two ideas. Although I like the thought of splitting the overflow tank, Im leaning towards seeing if I can fit a small tank under the intake filters.

Yeah its a temporary setup. I have a new plan under way but im just being way too lazy right now.lol Im hunting through my phone for pics at the moment. If I find one I will post it.

JARblue · 06-16-2014, 02:03 PM

Quote:

Originally Posted by Wiggins3377

After failing to fabricate the Mishimoto aftermarket reservoir to our car last year ...

Can I ask for some details of your failed efforts? I had a shop tell me they could fabricate a bracket for it without too much difficulty, but I just haven't bothered to move forward with it. I've had the PS reservoir sitting in my garage for over a year now. Note that I am mostly stock, so if you ran into configuration issues with your aftermarket parts, they may not affect me.

Wiggins3377 · 06-16-2014, 02:15 PM

I guess it was a combo of issues. The only way I could see the Mishimoto reservoir working is if you have some long tube intakes like the Stillen Gen 3s as this provides you with the most space in the OEM area. I was trying to make it work with the Top Secret intakes and there was just no way to do it with the filter covers (they are an awkward shape).

The Mishimoto tank is also a lot deeper than the OEM reservoir, so if you tried to mount it in the same location as OEM you would either hit your hood (causing it not to close) or would need to remove your fender liner. If I remember correctly their tank also causes issues because of the inlet locations. A couple people have made the 350z Weapon R tank work (talk to member Kukpet (his name is Petr)) and it looks pretty good, but I want to eventually shave that whole area to clean it up, so that's out for me.

All this said, im not a fabricator so maybe they could make it happen.

06-16-2014, 10:20 AM	#1 (permalink)
Wiggins3377 A True Z Fanatic Join Date: Jul 2011 Location: Cincinnati Posts: 3,236 Drives: 40th 370 Rep Power: 77	Power Steering Reservoir Relocation After failing to fabricate the Mishimoto aftermarket reservoir to our car last year and as I begin to work on replicating O&Gs wire tuck, I got to thinking about whether or not it would be possible to relocate the OEM reservoir. That being said has anyone tried it? Does anyone have any suggestions? The only thing that I keep thinking about (and I haven’t checked to see if it’s even possible yet), Is to make a combo tank with the radiator overflow. I have an aftermarket overflow tank now and I’m wondering if I could do something like the ARC combo can but make the left side a power steering reservoir. Any thoughts? Would there be any restrictions with my idea? What about return lines any issues there? __________________ AccuAir/ AirRex/ Amuse/ Bride Japan/ Carbon Fiber Element/ Carbon Signal/ Evo-R/ NRG/ Project Kics/ Samco/ Shine Auto/ SPC/ SPL/ Stance/ Stillen/ Takata/ Top Secret/ Work

06-16-2014, 10:23 AM	#2 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	In for ideas and results. I know O&G and jtran produced an aftermarket overflow tank for the radiator combo with catch can. So you might be able to do a similar idea with the PS resevoir. I have always been interested in moving mine, with my SC one of my lines rubs and has been replaced twice now. So reducing the distance or routing would be excellent! __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

06-16-2014, 10:24 AM	#3 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	Found the picture. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

06-16-2014, 10:25 AM	#4 (permalink)
Wiggins3377 A True Z Fanatic Join Date: Jul 2011 Location: Cincinnati Posts: 3,236 Drives: 40th 370 Rep Power: 77	Yeah I have a overflow tank very similar to that. Mine is just painted. I'm wondering if I'll run into trouble with the radiator hose. ImageUploadedByTapatalk1402928721.385346.jpg Sent from my iPhone using Tapatalk __________________ AccuAir/ AirRex/ Amuse/ Bride Japan/ Carbon Fiber Element/ Carbon Signal/ Evo-R/ NRG/ Project Kics/ Samco/ Shine Auto/ SPC/ SPL/ Stance/ Stillen/ Takata/ Top Secret/ Work

06-16-2014, 10:28 AM	#5 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	Seeing the TS filter covers makes it seem like that might be a tight fit there. An idea might be to move the overflow tank left or right a bit to free up some space for the PS resevoir. Also, side note, what catch can setup is that? TS? Wiggins3377 likes this. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

06-16-2014, 10:30 AM	#6 (permalink)
Wiggins3377 A True Z Fanatic Join Date: Jul 2011 Location: Cincinnati Posts: 3,236 Drives: 40th 370 Rep Power: 77	That's a good thought, would there be any issues with having longer lines than OEM going to/ from the reservoir? I don't know much about how it works. Any insight there would be helpful. Yeah, they are Top Secret catch cans. __________________ AccuAir/ AirRex/ Amuse/ Bride Japan/ Carbon Fiber Element/ Carbon Signal/ Evo-R/ NRG/ Project Kics/ Samco/ Shine Auto/ SPC/ SPL/ Stance/ Stillen/ Takata/ Top Secret/ Work

06-16-2014, 10:32 AM	#7 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	I know one of my lines is a little longer from the SC setup and I can hear a little noise from the pump working harder. I don't know all the ins/outs of the fluid v the pump. I am sure at some point the pump would be working to much to move the fluid and cause problems. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

06-16-2014, 10:33 AM	#8 (permalink)
Wiggins3377 A True Z Fanatic Join Date: Jul 2011 Location: Cincinnati Posts: 3,236 Drives: 40th 370 Rep Power: 77	I wonder if it's possible to make a small can that fits under the intake filter... Hmmm Thanks for the input Dreamer, ill definitely look into the length of the lines. I assume if there is a way to make them shorter that's a benefit?? If anyone else wants to chime in it would be appreciated. Sent from my iPhone using Tapatalk __________________ AccuAir/ AirRex/ Amuse/ Bride Japan/ Carbon Fiber Element/ Carbon Signal/ Evo-R/ NRG/ Project Kics/ Samco/ Shine Auto/ SPC/ SPL/ Stance/ Stillen/ Takata/ Top Secret/ Work Last edited by Wiggins3377; 06-16-2014 at 10:38 AM.

06-16-2014, 12:50 PM	#12 (permalink)
Wiggins3377 A True Z Fanatic Join Date: Jul 2011 Location: Cincinnati Posts: 3,236 Drives: 40th 370 Rep Power: 77	I figured you may have done that route. Any pics would be appreciated. I think Im going to try my one of my two ideas. Although I like the thought of splitting the overflow tank, Im leaning towards seeing if I can fit a small tank under the intake filters. __________________ AccuAir/ AirRex/ Amuse/ Bride Japan/ Carbon Fiber Element/ Carbon Signal/ Evo-R/ NRG/ Project Kics/ Samco/ Shine Auto/ SPC/ SPL/ Stance/ Stillen/ Takata/ Top Secret/ Work

06-16-2014, 02:15 PM	#15 (permalink)
Wiggins3377 A True Z Fanatic Join Date: Jul 2011 Location: Cincinnati Posts: 3,236 Drives: 40th 370 Rep Power: 77	I guess it was a combo of issues. The only way I could see the Mishimoto reservoir working is if you have some long tube intakes like the Stillen Gen 3s as this provides you with the most space in the OEM area. I was trying to make it work with the Top Secret intakes and there was just no way to do it with the filter covers (they are an awkward shape). The Mishimoto tank is also a lot deeper than the OEM reservoir, so if you tried to mount it in the same location as OEM you would either hit your hood (causing it not to close) or would need to remove your fender liner. If I remember correctly their tank also causes issues because of the inlet locations. A couple people have made the 350z Weapon R tank work (talk to member Kukpet (his name is Petr)) and it looks pretty good, but I want to eventually shave that whole area to clean it up, so that's out for me. All this said, im not a fabricator so maybe they could make it happen. JARblue likes this. __________________ AccuAir/ AirRex/ Amuse/ Bride Japan/ Carbon Fiber Element/ Carbon Signal/ Evo-R/ NRG/ Project Kics/ Samco/ Shine Auto/ SPC/ SPL/ Stance/ Stillen/ Takata/ Top Secret/ Work

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mishimoto Power Steering Reservoir Tank	Wiggins3377	Exterior & Interior	22	03-01-2018 09:53 PM
power steering fluid reservoir question	simota1	Engine & Drivetrain	7	02-23-2014 11:45 PM
2009 power steering reservoir cap	boomboom	Engine & Drivetrain	0	10-02-2013 05:40 PM
Power Steering Fluid Jumping Around in Reservoir	EazyD	Nissan 370Z General Discussions	16	07-10-2012 08:44 PM
steering reservoir	Shamrock	Engine & Drivetrain	6	05-02-2012 12:27 PM