Canadian Model Fog Light Help

Rocket

Hey everyone,

So after trying to figure this out for quite a while and a tearing everything apart multiple times i'm looking for some help. This might be a really stupid question and it's possible i'm confused (or retarded) from trying so many different things, but here it goes. I've read through almost every single fog light post and can't find the info i'm after.

I have the Canadian 40th model which came with the factory fog light and the switch on the signal stalk. All I want to do is swap out the factory fog for the Evo-R smoked one. I don't want to add any features or blinking, just a straight swap.

Thinking this would be easy, I cut the wires to the factory fog (red/black) right before the fog light and tried hooking them up to the Evo-R fog (red/black) using the stock harness. For the life of me, I can't get it to work. Thinking I may have damaged something, I soldered all the original connections back together and tested it. Of course, it works just fine.

Other than being able to make physical wire connections, I don't have a great understanding of electrical. Am I missing something? Does the fact i'm going from an incandescent bulb to LED's have something to do with it? I assume it doesn't since all the other LED swaps I've done have worked without issue.

If this has already been answered, a link would be appreciated.

Thanks!!

Maurice

cooltoy

Wow!

I would have sworn that the Canadian model was a dummy too. Your post made me run out and and test it. It works! Sweet!

I don't really have an answer to your question. Sorry.

Rocket

Glad I could be of help, even if it was unintentional!

cooltoy

Well, I guess I am interested in the answer too. I bought an EVO-R light as well. I wouldn't mind using it as a blinking light, but since it is connected to the fog light switch, I can turn it off when I don't want it to blink.

Rocket

Weekend bump. Can anyone offer some help?

Trips

Have you looked at the Evo-R instructions? I've never wired one up but know there are options in wiring it up.

__________________

cooltoy

Just wondering, if you do not mind, why replace a light that works with another one that works?

Zoren 370

Anyone of you want to sell your Oem foglights? Shipped to 32025.

cooltoy

When I put my EVO-R on. Mid winter.

Tran905

Think he wants the black smoked one instead of red.

On a side note, had the car for almost 2 years and never knew the fog light was actually functional! Thanks OP

cooltoy

Repped him for it.

cooltoy

The only thing I can think of, is that the fog light can only be turned on when the headlights are on. Maybe that is the reason why it's not working. You are testing it when the headlights are off.

Rocket

Bang on! I have already tinted the tails and 3rd brake light, so a red fog light didn't quite match the look I was going for.

Rocket

I was thinking the same thing, but I've tried every variation of lights on/off, ignition on/off. I can get the original one to work with the ignition on and the switch turned on so the indicator is lit. Tried the exact same scenario with the new one but got nothing....

The instructions that came with the light are the same ones that a few others have posted in the Evo-R fog threads. It's just a small piece of paper that shows which tail light connections need to be made.

Thanks for the guesses so far!

Any other ideas guys?

cooltoy

Tint the oem one?