DTR-LED's tapped to Parking Lights: Small issue!!!!

rmkane · 04-03-2014, 02:36 AM

Hey Everyone,

on my 2014 Sport/Touring I did a wire tap from the Parking Light Wire to the LED's power wire that is located in the front wheel well. Everything works great, except one minor issue. When the headlights are OFF and the radio is on, the back light on the Bose Radio Display is very dim. When the headlights are on, the radio display is lit normally. Obviously that the bridge is drawing power from the LED's, i was under the impression the LED's carry very low volts? So anyone know why this is happening to the Radio Display?

Could there be any long term issues by linking the DTRL to the Parking lights?

Appreciate everyones help on my first post here.

Rob.

pearlyZ · 04-03-2014, 06:46 AM

Sub for info. Thanks

Sent from my iPhone using Tapatalk

jburke26 · 04-03-2014, 09:33 AM

I bet the voltage is coming back through the wiring you added. Have you thought about using some sort of Diode to block the voltage one way from the DRL? I could be wrong but that should sort out the issue.

Fountainhead · 04-03-2014, 07:59 PM

I'm no auto wiring expert, but I do know it's customary for cabin electronics/dash lights to dim when headlights or parking lights are on, so it sounds as if yours are behaving reverse of normal. I'd reconnect everything normally until you find out what's wrong, then fix it.

rmkane · 04-03-2014, 09:57 PM

Thanks JBurke,

Stupid question, if i added a Diode where should it be attached? Would that effect the operation of the parking lights and/or LED's by halting the electricity?

The issue is NOT when the lights are on, its during daytime and the headlights are OFF. The radio window display does Not light up.

Thanks

jburke26 · 04-04-2014, 09:26 AM

No problem!

I think since you have 2 channels of current going into the DRLs you will need a diode connected on both of wire taps to prevent any voltage from flowing back through the bridge. I am not sure exactly which diode you need (12 volts, ? amps) but they do have markings on which way voltage can flow through them.

You should connect the diodes before the actual wire tap.

I am not sure if this is the safest way to wire them up, a relay could provide better results.

Ghostvette · 04-04-2014, 02:46 PM

Quote:

Originally Posted by Fountainhead

I'm no auto wiring expert, but I do know it's customary for cabin electronics/dash lights to dim when headlights or parking lights are on, so it sounds as if yours are behaving reverse of normal. I'd reconnect everything normally until you find out what's wrong, then fix it.

Do this first to make sure you didn't accidentally create a problem. Then make the mod with the diodes.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dome Lights - Question on LED's..	Pelican170	Exterior & Interior	23	02-18-2014 04:05 PM
Parking lights, Signal lights, license plate light opinion	wdkwang	Exterior & Interior	0	03-19-2011 12:25 AM
LED 194 Parking Lights	christian370z	Parts for sale (Private Classifieds)	25	12-16-2010 06:09 PM
LED parking lights and visor lights?	Nismo221	Exterior & Interior	1	12-09-2010 10:02 AM
WTB: Someone that can install LED's and black out front lights	darkseed	Wanted	0	11-08-2009 06:07 AM

04-03-2014, 06:46 AM	#2 (permalink)
pearlyZ Enthusiast Member Join Date: Sep 2013 Location: Rowlett, TX Posts: 284 Drives: 13 pearl white 370z Rep Power: 12	Sub for info. Thanks Sent from my iPhone using Tapatalk

04-03-2014, 09:33 AM	#3 (permalink)
jburke26 Enthusiast Member Join Date: Mar 2012 Location: Cullman, Alabama Posts: 252 Drives: Sold Z Rep Power: 13	I bet the voltage is coming back through the wiring you added. Have you thought about using some sort of Diode to block the voltage one way from the DRL? I could be wrong but that should sort out the issue.

04-03-2014, 07:59 PM	#4 (permalink)
Fountainhead Track Member Join Date: Feb 2013 Location: FL Posts: 834 Drives: 2019 Civic Type R Rep Power: 14	I'm no auto wiring expert, but I do know it's customary for cabin electronics/dash lights to dim when headlights or parking lights are on, so it sounds as if yours are behaving reverse of normal. I'd reconnect everything normally until you find out what's wrong, then fix it.

04-03-2014, 09:57 PM	#5 (permalink)
rmkane Base Member Join Date: Mar 2014 Location: Marina del Rey Posts: 2 Drives: 2014 370z Tur/spt A Rep Power: 11	Thanks JBurke, Stupid question, if i added a Diode where should it be attached? Would that effect the operation of the parking lights and/or LED's by halting the electricity? The issue is NOT when the lights are on, its during daytime and the headlights are OFF. The radio window display does Not light up. Thanks

04-04-2014, 09:26 AM	#6 (permalink)
jburke26 Enthusiast Member Join Date: Mar 2012 Location: Cullman, Alabama Posts: 252 Drives: Sold Z Rep Power: 13	No problem! I think since you have 2 channels of current going into the DRLs you will need a diode connected on both of wire taps to prevent any voltage from flowing back through the bridge. I am not sure exactly which diode you need (12 volts, ? amps) but they do have markings on which way voltage can flow through them. You should connect the diodes before the actual wire tap. I am not sure if this is the safest way to wire them up, a relay could provide better results.