Red carbon fiber dash kit for headunit?

Jsmith7861 · 01-27-2014, 09:56 PM

Hey guys, done a bit of searching without luck, does anyone know if this exists or can be special made from somewhere? I know EVO-R has a black carbon fiber one, but im looking for red. To clarify, im only looking for the headunit part that goes around the knobs, not the whole center for the cubby and all.

Z34_Nismo · 01-27-2014, 10:03 PM

Check out Carbon Fiber Element, they're a vendor on here and are recommended by a lot of people.

Carbon Fiber Element....Pics of Our Work!!!

Masterbeatty · 01-28-2014, 06:06 PM

I did my entire interior for 1/4 the price over the course of 4 months. I got all my stuff from compositeenvisions.com they have hundreds of colors and weaves.

maizenblue · 01-28-2014, 08:45 PM

Quote:

Originally Posted by Masterbeatty

I did my entire Interior for 1/4 the price over the course of 4 months. I got all my stuff from compositeenvisions.com they have hundreds of colors and weaves.

Can you post pictures of how it turned out? i might try this

Jsmith7861 · 01-28-2014, 09:52 PM

Quote:

Originally Posted by Masterbeatty

I did my entire interior for 1/4 the price over the course of 4 months. I got all my stuff from compositeenvisions.com they have hundreds of colors and weaves.

All of that looks amazing, but I dont even have a clue how to make my own lol. Unless I missed something on there.

maizenblue · 01-28-2014, 10:43 PM

Quote:

Originally Posted by Jsmith7861

All of that looks amazing, but I dont even have a clue how to make my own lol. Unless I missed something on there.

You just put it on like a sticker over your current setup

Sent from my SCH-I535 using Tapatalk

edub370 · 01-29-2014, 02:21 PM

Get real cf. No stickers

Masterbeatty · 01-29-2014, 03:04 PM

Quote:

Originally Posted by maizenblue

You just put it on like a sticker over your current setup

Sent from my SCH-I535 using Tapatalk

Negative ghostryder. That stuff is the real deal! It is carbon and colored Kevlar woven cloth. Read in the details. It's probably the same place a current forum vender uses to wrap their stuff with.

I will post some pics later after I change my oil. I got the black carbon and orange Kevlar to match the gauges. I also did the engine cover and rear brace bar too.

maizenblue · 01-29-2014, 03:05 PM

I saw the rigid panels had a 3m adhesive option

Sent from my SCH-I535 using Tapatalk

Masterbeatty · 01-29-2014, 03:18 PM

Masterbeatty · 01-29-2014, 03:19 PM

TenaciousZ · 01-29-2014, 05:10 PM

Im in for pics^^^

Masterbeatty · 01-29-2014, 06:39 PM

I watched a bunch of YouTube videos for awhile before growing a pair and actually do it. But the turn out was awesome. Everyday I get compliments. I thought about doing it on the side but my job gets busy at random intervals so I can't commit to something. That and it's been cold as **** in ct and i have no garage. The process sounds easy but it's not. But I did one part a week and it was not as hard on you. When I did the brace bar I didn't drive it for a few days till I got it back in as I did not want to risk bending the frame even if it is a small chance.

Jsmith7861 · 01-29-2014, 07:26 PM

Can you explain the process a bit? And is that orange or red? Either way, looks great man! I personally dont want my cubby done, but that looks great!

Edit: Nvm about the color, re-read your earlier post.

Masterbeatty · 01-29-2014, 08:27 PM

In a nut she'll you take the piece off. Paint on the base coat of resin, let it dry to a tack. Then wrap the piece in CF, apply first coat of resin. Let it fully dry. Sand smooth, repeat 2 more times. Then sand smooth and apply a clear coat or use a fine polish. Then reinstall and enjoy. The sanding and finishing is the hard part. Trying to get it to not look like old man balls is harder than you might think. That's why I did it one piece at a time. The brace bar removal was the biggest pain in the a$$ removing all the surrounding trim. Pm me if you are interested in the do's and dont's. I helped a friend in Cali do his '12 GSX-R plastics over the phone. The kits are cheap and they have all the right stuff. But I had to buy more sand paper, brushes and gloves.

01-27-2014, 09:56 PM	#1 (permalink)
Jsmith7861 Enthusiast Member Join Date: Nov 2013 Location: Virginia Posts: 466 Drives: 2014 370z Base Sport Rep Power: 12	Red carbon fiber dash kit for headunit? Hey guys, done a bit of searching without luck, does anyone know if this exists or can be special made from somewhere? I know EVO-R has a black carbon fiber one, but im looking for red. To clarify, im only looking for the headunit part that goes around the knobs, not the whole center for the cubby and all.

01-27-2014, 10:03 PM	#2 (permalink)
Z34_Nismo Base Member Join Date: Oct 2012 Location: Houston, TX Posts: 172 Drives: Nismo Moonbeam Rep Power: 13	Check out Carbon Fiber Element, they're a vendor on here and are recommended by a lot of people. Carbon Fiber Element....Pics of Our Work!!! __________________ CarbonSignal: V2 Fenders, Nismo Moonbeam & Lip Kit\|Swift Springs\|aFe Stage 2 Intakes\|Berk HFC\|Finite Element RC Ducts\|NST UD Pulley Kit

01-28-2014, 06:06 PM	#3 (permalink)
Masterbeatty A True Z Fanatic Join Date: May 2012 Location: Whales Vagina Posts: 4,586 Drives: the speed limit... Rep Power: 122867	I did my entire interior for 1/4 the price over the course of 4 months. I got all my stuff from compositeenvisions.com they have hundreds of colors and weaves. __________________ 2011 MB 6MT Masterbeatty journal

01-29-2014, 02:21 PM	#7 (permalink)
edub370 A True Z Fanatic Join Date: May 2011 Location: KCMO Posts: 3,458 Drives: 09 370z S/T 6MT Rep Power: 20	Get real cf. No stickers __________________ 09 370Z ST 6MT//Injen CAI//Greddy CBE//TP//TSW's//Swifts//Stillen lip//Whiteline sways 326whp/268tq

01-29-2014, 03:18 PM	#10 (permalink)
Masterbeatty A True Z Fanatic Join Date: May 2012 Location: Whales Vagina Posts: 4,586 Drives: the speed limit... Rep Power: 122867	__________________ 2011 MB 6MT Masterbeatty journal

01-29-2014, 03:05 PM	#9 (permalink)
maizenblue Enthusiast Member Join Date: Sep 2013 Location: Denver Posts: 288 Drives: 2010 370Z Rep Power: 12	I saw the rigid panels had a 3m adhesive option Sent from my SCH-I535 using Tapatalk

01-29-2014, 03:19 PM	#11 (permalink)
Masterbeatty A True Z Fanatic Join Date: May 2012 Location: Whales Vagina Posts: 4,586 Drives: the speed limit... Rep Power: 122867	__________________ 2011 MB 6MT Masterbeatty journal

01-29-2014, 05:10 PM	#12 (permalink)
TenaciousZ Base Member Join Date: Aug 2010 Location: Kansas City Posts: 160 Drives: Black 09 sp/tour/nav Rep Power: 15	Im in for pics^^^ __________________ 09 370Z Black Sport/Touring/Navi Red Stitching

01-29-2014, 06:39 PM	#13 (permalink)
Masterbeatty A True Z Fanatic Join Date: May 2012 Location: Whales Vagina Posts: 4,586 Drives: the speed limit... Rep Power: 122867	I watched a bunch of YouTube videos for awhile before growing a pair and actually do it. But the turn out was awesome. Everyday I get compliments. I thought about doing it on the side but my job gets busy at random intervals so I can't commit to something. That and it's been cold as ** in ct and i have no garage. The process sounds easy but it's not. But I did one part a week and it was not as hard on you. When I did the brace bar I didn't drive it for a few days till I got it back in as I did not want to risk bending the frame even if it is a small chance. __________________ 2011 MB 6MT Masterbeatty journal**

01-29-2014, 07:26 PM	#14 (permalink)
Jsmith7861 Enthusiast Member Join Date: Nov 2013 Location: Virginia Posts: 466 Drives: 2014 370z Base Sport Rep Power: 12	Can you explain the process a bit? And is that orange or red? Either way, looks great man! I personally dont want my cubby done, but that looks great! Edit: Nvm about the color, re-read your earlier post.

01-29-2014, 08:27 PM	#15 (permalink)
Masterbeatty A True Z Fanatic Join Date: May 2012 Location: Whales Vagina Posts: 4,586 Drives: the speed limit... Rep Power: 122867	In a nut she'll you take the piece off. Paint on the base coat of resin, let it dry to a tack. Then wrap the piece in CF, apply first coat of resin. Let it fully dry. Sand smooth, repeat 2 more times. Then sand smooth and apply a clear coat or use a fine polish. Then reinstall and enjoy. The sanding and finishing is the hard part. Trying to get it to not look like old man balls is harder than you might think. That's why I did it one piece at a time. The brace bar removal was the biggest pain in the a$$ removing all the surrounding trim. Pm me if you are interested in the do's and dont's. I helped a friend in Cali do his '12 GSX-R plastics over the phone. The kits are cheap and they have all the right stuff. But I had to buy more sand paper, brushes and gloves. __________________ 2011 MB 6MT Masterbeatty journal

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Carbon Fiber Dash Kits	///PureSwank	Exterior & Interior	33	12-16-2012 03:04 PM
[FOR SALE] Carbon Fiber Dash Console...by CFElement	Carbon Fiber Element	Parts for sale (Private Classifieds)	5	10-09-2012 08:56 AM
FS: Carbon Fiber A-pillars, Switch Panels, and Dash Kit	Carbon Fiber Element	Parts for sale (Private Classifieds)	17	01-31-2011 04:48 PM
Real Carbon-Fiber Dash and Door Inserts	Carbon_z	Exterior & Interior	81	01-29-2011 12:14 PM
Carbon Fiber Radio Dash Replacement	Carbon_z	Group Buys	19	01-24-2011 07:03 PM