Removing dealer Badge?

tonybell_57 · 01-25-2014, 11:48 PM

Unwaxed dental floss, followed by goo gone and a credit card. Works every time.

TexasChuck · 01-26-2014, 07:29 AM

Hey, thanks. Definitely some good ideas.
Chuck

Kenwoodturbo · 01-26-2014, 10:07 AM

Typically if it's a hard emblem type I use light weight fishing line and hair dryer. I basically take against the back of emblem which leaves the ds tape. Then the remaining ds tape I use 3m adhesive remover. If you soak the remaining tape in the adhesive remover it practically falls off. I've done this on fresh emblems as well as 20 year old factory emblems. It seems to work much better than goo gone. If it's a vinyl decal then I use my finger to pick/pull it off then adhesive remover. Once done just use some light scratch remover to polish out the area.

TexasChuck · 01-26-2014, 11:37 AM

Got it! Thanks

01-25-2014, 11:48 PM	#1 (permalink)
tonybell_57 Base Member Join Date: Dec 2013 Location: Suwanee, GA Posts: 119 Drives: 12 MB 370ZR T/S/7AT Rep Power: 12	Unwaxed dental floss, followed by goo gone and a credit card. Works every time. onzedge and SterlingDrive like this. __________________ APF\|Berk\|Escort\|EVO-R\|Hotchkiss\|JPM Coachworks\|Kinetix\|SpoilerSolutions\|Stillen\|Tein\|Z 1

01-26-2014, 07:29 AM	#2 (permalink)
TexasChuck Track Member Join Date: Oct 2012 Location: SE Texas Posts: 556 Drives: 2014 Black Cherry Co Rep Power: 14	Badge removal. Hey, thanks. Definitely some good ideas. Chuck

01-26-2014, 11:37 AM	#4 (permalink)
TexasChuck Track Member Join Date: Oct 2012 Location: SE Texas Posts: 556 Drives: 2014 Black Cherry Co Rep Power: 14	Badge Got it! Thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Removing the dealer plastic name tag	hawkerpilot62	Nissan 370Z General Discussions	25	08-01-2013 09:23 PM
HKS badge ...	snaggeltooth	Nissan 370Z General Discussions	11	10-31-2010 02:18 PM
Z badge	tigershak	Exterior & Interior	16	07-11-2010 01:00 AM
Z34 Badge?	Gunzero	Exterior & Interior	17	06-19-2010 11:02 PM
Removing Dealer Sticker	Amon	Exterior & Interior	17	05-05-2009 01:51 PM

01-26-2014, 10:07 AM	#3 (permalink)
Kenwoodturbo Base Member Join Date: Oct 2013 Location: Cincinnati Posts: 124 Drives: 13 Nismo Rep Power: 12	Typically if it's a hard emblem type I use light weight fishing line and hair dryer. I basically take against the back of emblem which leaves the ds tape. Then the remaining ds tape I use 3m adhesive remover. If you soak the remaining tape in the adhesive remover it practically falls off. I've done this on fresh emblems as well as 20 year old factory emblems. It seems to work much better than goo gone. If it's a vinyl decal then I use my finger to pick/pull it off then adhesive remover. Once done just use some light scratch remover to polish out the area.