Z emblems??

1st · 01-19-2014, 11:31 PM

Decided to go with this emblem. A perfect match with the fenders.

Malm · 01-22-2014, 02:12 PM

How easy was it to do?

Consider a person who has very very little technical ability. Id love to detagg my rear, and add a black Z on the front and back.

edit: Looking at the OP's tags link. I am a bit nervous about trying to peel up the emblems.. and then figure out what to use to clean the glue..

theDreamer · 01-22-2014, 02:15 PM

Quote:

Originally Posted by Malm

How easy was it to do?

Consider a person who has very very little technical ability. Id love to detagg my rear, and add a black Z on the front and back.

Not hard, note I actually let gurneyeagle do it since he has done it before.
His steps were, heat up the old emblems with a hair dryer, slowly start getting underneath them to loosen the glue or whatever is used. Peel them off, then start to get all the extra glue off the bumper down to what you can fairly easily. Then he started to use something (will let him answer this part) to wipe it down and get all the last bits of glue left and clean the bumper.

After that line up the new emblems and stick them on. All in all it took us maybe a little over an hour to do both front & rear.

Chuck33079 · 01-22-2014, 02:17 PM

Quote:

Originally Posted by theDreamer

Not hard, note I actually let gurneyeagle do it since he has done it before.
His steps were, heat up the old emblems with a hair dryer, slowly start getting underneath them to loosen the glue or whatever is used. Peel them off, then start to get all the extra glue off the bumper down to what you can fairly easily. Then he started to use something (will let him answer this part) to wipe it down and get all the last bits of glue left and clean the bumper.

After that line up the new emblems and stick them on. All in all it took us maybe a little over an hour to do both front & rear.

Some fishing line helped on mine. Goo gone helped with the adhesive.

kenchan · 01-22-2014, 02:18 PM

Quote:

Originally Posted by theDreamer

Not hard, note I actually let gurneyeagle do it since he has done it before.
His steps were, heat up the old emblems with a hair dryer, slowly start getting underneath them to loosen the glue or whatever is used. Peel them off, then start to get all the extra glue off the bumper down to what you can fairly easily. Then he started to use something (will let him answer this part) to wipe it down and get all the last bits of glue left and clean the bumper.

After that line up the new emblems and stick them on. All in all it took us maybe a little over an hour to do both front & rear.

like mounting tape?

theDreamer · 01-22-2014, 02:22 PM

Quote:

Originally Posted by kenchan

like mounting tape?

Yes that, I swear Nissan must have been dipping these cars in adhesive from the shift knobs to the emblems.
My front emblem was factory installed versus my rear which the dealership did after someone hit me. The amount of tape/glue difference was massive, the rear came off fairly easily while the front had sooo much extra.

kenchan · 01-22-2014, 02:24 PM

yah, bumpers are made at another factory with the emblems attached probably, and put together with the rest of the metal body panels at the assembly plant.

johncarlopang · 01-22-2014, 07:08 PM

hi everyone . what tools do you use in debadginf the front and back nissan emblem? and wha tdo you use in sticking a new one ?

DEpointfive0 · 01-22-2014, 07:31 PM

Quote:

Originally Posted by johncarlopang

hi everyone . what tools do you use in debadginf the front and back nissan emblem? and wha tdo you use in sticking a new one ?

C'mon bro. Read the thread

EVOR · 01-22-2014, 10:49 PM

If need to have our emblem with matching painted color back plate. We do offer this service.

Crayon · 01-22-2014, 11:44 PM

It's tough. I really like the pearl/shiny black Z one that has been posted a few times, but I don't like the silver. The hard part is that my car is Magnetic Black, and I don't think you'd even be able to notice the different emblem if I put it on.
I have some rear bumper ding fixing (f'n people hitting my parked Z...), so I figured now's the best time to do it.

Thoughts on what looks best on a Black Z? Does anyone make a Nismo burger?

Chuck33079 · 01-22-2014, 11:48 PM

Quote:

Originally Posted by Crayon

It's tough. I really like the pearl/shiny black Z one that has been posted a few times, but I don't like the silver. The hard part is that my car is Magnetic Black, and I don't think you'd even be able to notice the different emblem if I put it on.
I have some rear bumper ding fixing (f'n people hitting my parked Z...), so I figured now's the best time to do it.

Thoughts on what looks best on a Black Z? Does anyone make a Nismo burger?

The black chrome badges look great on a black car.

netmindaZ · 01-23-2014, 06:16 AM

Quote:

Originally Posted by 1st

Decided to go with this emblem. A perfect match with the fenders.

I got these same emblems...they look great. Look like they came with the car...match the fender Z's perfectly.

Rob

theDreamer · 01-23-2014, 08:02 AM

Quote:

Originally Posted by Chuck33079

The black chrome badges look great on a black car.

Quote:

Originally Posted by Crayon

It's tough. I really like the pearl/shiny black Z one that has been posted a few times, but I don't like the silver. The hard part is that my car is Magnetic Black, and I don't think you'd even be able to notice the different emblem if I put it on.
I have some rear bumper ding fixing (f'n people hitting my parked Z...), so I figured now's the best time to do it.

Thoughts on what looks best on a Black Z? Does anyone make a Nismo burger?

I agree with chuck, black chrome will add a little pop and make it noticeable.
Have not seen a NISMO version instead of Nissan but might want to shoot EVO-R here a PM and see if he could produce some. Bet if you get some interest he might do it.

Chuck33079 · 01-23-2014, 08:10 AM

Quote:

Originally Posted by theDreamer

I agree with chuck, black chrome will add a little pop and make it noticeable.
Have not seen a NISMO version instead of Nissan but might want to shoot EVO-R here a PM and see if he could produce some. Bet if you get some interest he might take your money and one day sometime down the line ship you a product when he feels like it or AK locks his account until he makes good again.

Fixed.

01-19-2014, 11:31 PM	#16 (permalink)
1st A True Z Fanatic Join Date: Jul 2012 Location: I 80 Biz U.S. 50 Posts: 1,710 Drives: Platinum Z Rep Power: 1616	Decided to go with this emblem. A perfect match with the fenders. Amuse370z likes this. Last edited by 1st; 01-20-2014 at 12:03 AM.

01-22-2014, 10:49 PM	#25 (permalink)
EVOR A True Z Fanatic Join Date: Sep 2009 Location: New York Posts: 1,647 Drives: 09 Nismo 370Z #80 Rep Power: 45	If need to have our emblem with matching painted color back plate. We do offer this service. __________________ WWW.EVO-R.NET

01-22-2014, 11:44 PM	#26 (permalink)
Crayon Base Member Join Date: Dec 2013 Location: New Mexico Posts: 78 Drives: 2012 Nismo 370z #308 Rep Power: 12	It's tough. I really like the pearl/shiny black Z one that has been posted a few times, but I don't like the silver. The hard part is that my car is Magnetic Black, and I don't think you'd even be able to notice the different emblem if I put it on. I have some rear bumper ding fixing (f'n people hitting my parked Z...), so I figured now's the best time to do it. Thoughts on what looks best on a Black Z? Does anyone make a Nismo burger? __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My New Emblems	daisuke149	Exterior & Interior	47	10-23-2014 11:24 AM
Emblems	tbonesteak	Southern California Region	2	05-26-2010 06:05 PM
Emblems	cdawg410	Exterior & Interior	15	04-11-2010 09:08 PM
Under the emblems	cwj370	Exterior & Interior	40	07-25-2009 12:36 PM

01-22-2014, 02:12 PM	#17 (permalink)
Malm Track Member Join Date: Jan 2014 Location: Palm Bay, Florida Posts: 706 Drives: 11 Nissan 370z bs a7 Rep Power: 12	How easy was it to do? Consider a person who has very very little technical ability. Id love to detagg my rear, and add a black Z on the front and back. edit: Looking at the OP's tags link. I am a bit nervous about trying to peel up the emblems.. and then figure out what to use to clean the glue..

01-22-2014, 02:24 PM	#22 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	yah, bumpers are made at another factory with the emblems attached probably, and put together with the rest of the metal body panels at the assembly plant.

01-22-2014, 07:08 PM	#23 (permalink)
johncarlopang Base Member Join Date: Apr 2013 Location: las vegas Posts: 141 Drives: none Rep Power: 12	hi everyone . what tools do you use in debadginf the front and back nissan emblem? and wha tdo you use in sticking a new one ?