WC Lathe Werks - Shift Knob

phantom370z · 01-02-2014, 05:23 PM

I just got in my custom Shift Knob from WC Lathe Werks and installed it. It's pretty great in my opinion...much better than the cheap looking stock knob. Props to Chris for the craftsmanship, top notch as always. I would reccomend him to ANYONE that is looking for a shift knob. As you can see this is a 1 piece that comes with the collar and everything so that it installs perfectly and looks great.

This is the link to the page for the 370z if you want to order one for yourself and there's tons of options: http://lathewerks.com/shop/index.php?cPath=30_50

This is a all Black Copolymer Knob with knurled edges, 6MT engraving with red paint, and a weighted brass insert:

Since I'm sure someone will probably ask...I used a Husky strap wrench from Home Depot and regular vice grips to remove the stock knob and it was no problem at all, as I suspected.

XwChriswX · 01-02-2014, 05:44 PM

Looks really good!

Too bad like all other vendors, they can't do anything for the AT folks...

phantom370z · 01-02-2014, 05:50 PM

Quote:

Originally Posted by XwChriswX

Looks really good!

Too bad like all other vendors, they can't do anything for the AT folks...

stop buying AT's?

XwChriswX · 01-02-2014, 05:54 PM

Quote:

Originally Posted by phantom370z

stop buying AT's?

Why would I buy a slower car??

phantom370z · 01-02-2014, 05:56 PM

Quote:

Originally Posted by XwChriswX

Why would I buy a slower car??

More fun. To each their own though.

XwChriswX · 01-02-2014, 05:59 PM

Quote:

Originally Posted by phantom370z

More fun. To each their own though.

Meh, less hassle = more fun.

As you said, TETO.

Still a kickass looking knob.

jlo370z · 01-03-2014, 09:31 AM

Quote:

Originally Posted by phantom370z

I just got in my custom Shift Knob from WC Lathe Werks and installed it. It's pretty great in my opinion...much better than the cheap looking stock knob. Props to Chris for the craftsmanship, top notch as always. I would reccomend him to ANYONE that is looking for a shift knob. As you can see this is a 1 piece that comes with the collar and everything so that it installs perfectly and looks great.

This is the link to the page for the 370z if you want to order one for yourself and there's tons of options: http://lathewerks.com/shop/index.php?cPath=30_50

This is a all Black Copolymer Knob with knurled edges, 6MT engraving with red paint, and a weighted brass insert:

Since I'm sure someone will probably ask...I used a Husky strap wrench from Home Depot and regular vice grips to remove the stock knob and it was no problem at all, as I suspected.

is that weighted? or heavier then the stock knob?

looks great

phantom370z · 01-03-2014, 09:46 AM

Quote:

Originally Posted by jlo370z

is that weighted? or heavier then the stock knob?

looks great

It's got a brass insert for weight...but honestly the stock knob is so huge I think it still may weigh a bit more than this one. Also since this one is co-polymer it doesn't heat up like stainless/aluminum and doesn't burn your hands like some aftermarket ones do.

jlo370z · 01-03-2014, 09:57 AM

why is the one you have not listed on his site? or is that they hybrid with black bottom?

phantom370z · 01-03-2014, 10:29 AM

Quote:

Originally Posted by jlo370z

why is the one you have not listed on his site? or is that they hybrid with black bottom?

It's a variant of that hybrid one but no-stainless and all co-polymer. I specifically asked him to make me an all black co-polymer knob with knurled edges and red 6MT engraving. It's not something he'd done until I contacted him but if you reference this thread he'll know what your talking about and I'm sure he'd make another. Email him with any questions you may have and I'm sure he'll take care of you.

kenchan · 01-03-2014, 11:57 AM

Quote:

Originally Posted by XwChriswX

Why would I buy a slower car??

just because you cant drive MT doesnt mean everyone else sucksarse.

kenchan · 01-03-2014, 11:58 AM

op- looks good. i like the fact that it flares outward at the bottom to meet the boot top perfectly.

jlo370z · 01-03-2014, 12:01 PM

Quote:

Originally Posted by phantom370z

It's a variant of that hybrid one but no-stainless and all co-polymer. I specifically asked him to make me an all black co-polymer knob with knurled edges and red 6MT engraving. It's not something he'd done until I contacted him but if you reference this thread he'll know what your talking about and I'm sure he'd make another. Email him with any questions you may have and I'm sure he'll take care of you.

sent email, thanks

XwChriswX · 01-03-2014, 12:45 PM

Quote:

Originally Posted by kenchan

just because you cant drive MT doesnt mean everyone else sucksarse.

I can drive it, I just choose not to since we've advanced passed that.

phantom370z · 01-03-2014, 03:31 PM

Quote:

Originally Posted by kenchan

op- looks good. i like the fact that it flares outward at the bottom to meet the boot top perfectly.

Definitely, I love it

01-02-2014, 05:23 PM	#1 (permalink)
phantom370z Track Member Join Date: Dec 2013 Location: South Carolina Posts: 865 Drives: 14 Nismo 370Z PW Rep Power: 13	WC Lathe Werks - Shift Knob I just got in my custom Shift Knob from WC Lathe Werks and installed it. It's pretty great in my opinion...much better than the cheap looking stock knob. Props to Chris for the craftsmanship, top notch as always. I would reccomend him to ANYONE that is looking for a shift knob. As you can see this is a 1 piece that comes with the collar and everything so that it installs perfectly and looks great. This is the link to the page for the 370z if you want to order one for yourself and there's tons of options: http://lathewerks.com/shop/index.php?cPath=30_50 This is a all Black Copolymer Knob with knurled edges, 6MT engraving with red paint, and a weighted brass insert: Since I'm sure someone will probably ask...I used a Husky strap wrench from Home Depot and regular vice grips to remove the stock knob and it was no problem at all, as I suspected. XwChriswX, kenchan, MDZOwner and 2 others like this. __________________ 14' Pearl White Nismo 370z - SOLD Last edited by phantom370z; 01-02-2014 at 05:40 PM.

01-02-2014, 05:44 PM	#2 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 452	Looks really good! Too bad like all other vendors, they can't do anything for the AT folks... __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

01-03-2014, 09:57 AM	#9 (permalink)
jlo370z Im a Fireball Join Date: Apr 2012 Location: Ill in noise Posts: 3,370 Drives: 11 370z Red 6spd Rep Power: 43426	why is the one you have not listed on his site? or is that they hybrid with black bottom? __________________ ❝The Jlo370Z Build❞ 523HP \| 455 ftb tq \| 11.5 PSI \| 93 Octane *2017 Porsche 991.2 C4!l*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Stock Shift knob & custom CFE shift boot	edub370	Parts for sale (Private Classifieds)	4	08-21-2013 01:23 PM
Shift knob installation? Shift knob recommendations?	Gibby1113	DIY Section (Do-It-Yourself)	21	05-30-2013 08:08 PM
WC Lathe Werks Shift knob	mic_crispy	Exterior & Interior	12	04-30-2012 03:54 PM
SOLD: 7AT Red/Carbon Shift knob with OEM 6MT Shift boot (SW Florida)	TMAN1985	Parts for sale (Private Classifieds)	8	04-23-2012 10:01 PM
WC Lathe Werks	dozerdc	Mid-Atlantic Region	15	03-01-2012 03:09 PM

01-03-2014, 11:58 AM	#12 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	op- looks good. i like the fact that it flares outward at the bottom to meet the boot top perfectly.