Front bumper air intakes

synolimit · 12-30-2013, 03:35 AM

Quote:

Originally Posted by DEpointfive0

No, I'm serious.

Yeah, I have. I've actually seen it in person. His isn't painted. Mine is... It doesn't deform at all, is much more rigid after prep and paint

O, I have no idea what you're talking about with the bumper than? What's happening with the cuts or whatever?

Hmm interesting.

synolimit · 12-30-2013, 03:43 AM

Quote:

Originally Posted by martin82

It's just a matter of time if you drive the car hard, I do 140's several times a year to about top speed also, the bumper is just too heavy for what it is. Out in the summer on track bumper just flexes like crazy, out in the cold is fine. The top sags and just too damn heavy. Thinking of putting stock bumper back w varis lip or ings bumpers or wait for big one coming out

Interesting. Whats it made out of? It's got such large holes I'd think it'd be light. Game plan is to use a sheet of aluminium and make a splitter. I know people will say use that cardboard looking sheet though because it's stronger. I just hate the look of it.

Akbubba47 · 12-30-2013, 05:28 AM

Quote:

Originally Posted by synolimit

Interesting. Whats it made out of? It's got such large holes I'd think it'd be light. Game plan is to use a sheet of aluminium and make a splitter. I know people will say use that cardboard looking sheet though because it's stronger. I just hate the look of it.

Polyurethane

Kingbaby · 12-30-2013, 07:20 AM

I say get a oem nismo...you guys would be surprised what your bumpers look like above 140

PEPI · 12-30-2013, 07:28 AM

Quote:

Originally Posted by martin82

It's just a matter of time if you drive the car hard, I do 140's several times a year to about top speed also, the bumper is just too heavy for what it is. Out in the summer on track bumper just flexes like crazy, out in the cold is fine. The top sags and just too damn heavy. Thinking of putting stock bumper back w varis lip or ings bumpers or wait for big one coming out

My Stillen kit 3 years old and is sagging. Also side skirts starting to sag a little in the middle.....looks like **** when in the sun after a while.

I Often do high speed runs 1600km between my home town and where I live now ( Northern Territory Australia) - when I stop to fuel up, I have had to 'pop' the front bumper back into place under the headlights - certainly leads me to believe to flexing on a hot day at speed - sick of it -

I am putting my OEM kit back on - I think my stillen kit will suit someone else in a much much cooler climate and/or the dump....

DEpointfive0 · 12-30-2013, 09:24 AM

^That sucks

Ever thought about using builder's expanding foam behind it?

synolimit · 12-30-2013, 02:12 PM

Quote:

Originally Posted by Kingbaby

I say get a oem nismo...you guys would be surprised what your bumpers look like above 140

Any evidence of this? I still think with a splitter the difference is marginal. Plus I'm not a huge fan of it.

martin82 · 12-30-2013, 03:12 PM

This is a wild guess but I guess the stillen bumper weights 3x stock bumper lol!!!

synolimit · 12-30-2013, 03:21 PM

Wow!!

DEpointfive0 · 12-30-2013, 04:24 PM

Quote:

Originally Posted by martin82

This is a wild guess but I guess the stillen bumper weights 3x stock bumper lol!!!

Yeah, probably 2x, maybe more, but it just seems a lot bigger too. I made mine even heavier by adding a scrape guard, lol

I wonder how much more it weighs than the Nismo, because the Nismo sticks out a lot more than the standard car

PEPI · 12-30-2013, 05:28 PM

Quote:

Originally Posted by DEpointfive0

^That sucks

Ever thought about using builder's expanding foam behind it?

Hadn't thought of that - but I did fashion and make a metal brace to help reinforce and keep the bumpers shape. Still droops a little at the top where the emblem would be on the OEM one.

I'll put a pic up of it over the weekend.

It could just be me - but I had have the attraction to the OEM look of late - getting old I guess....

I do like the OEM look of the rear end lowered with spacers thought. Looks fuctional and squat.
Which leads me to ask - the FI ppl using spacers and track their cars - which spacers would be recommended?

Cheers

luigi90210 · 12-30-2013, 10:10 PM

design 1 is suppose to flow better but those bumper cutouts are suppose to be for short ram intakes, well at least thats what they were used for on the 350z

synolimit · 12-30-2013, 10:29 PM

Quote:

Originally Posted by luigi90210

design 1 is suppose to flow better but those bumper cutouts are suppose to be for short ram intakes, well at least thats what they were used for on the 350z

Short rams though are to far away behind the radiator and support. These make more sense on a long tube cai system.

martin82 · 12-31-2013, 05:07 PM

on the stillen bumper there are 2 slits on the front to move air straight to the air intakes, that's exactly where they get full of dirt caked on. I need to clean mine off every 3 track days, if I go longer and its caked with dust/dirt, I can't even pull on an s2k on the straight away......

View Poll Results: 1 or 2
1.	10	43.48%
2.	13	56.52%
Voters: 23. You may not vote on this poll

12-30-2013, 09:24 AM	#21 (permalink)
DEpointfive0 A True Z Fanatic Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17152	^That sucks Ever thought about using builder's expanding foam behind it? __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

12-30-2013, 03:21 PM	#24 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3390	Wow!! __________________ 13 370z-

12-30-2013, 10:10 PM	#27 (permalink)
luigi90210 A True Z Fanatic Join Date: Apr 2012 Location: San Diego CA Posts: 1,103 Drives: Classified Rep Power: 16	design 1 is suppose to flow better but those bumper cutouts are suppose to be for short ram intakes, well at least thats what they were used for on the 350z __________________ SOLD 370z New Car:classified DD:2011 Mini Cooper S stock

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-30-2013, 03:12 PM	#23 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	This is a wild guess but I guess the stillen bumper weights 3x stock bumper lol!!!

12-31-2013, 05:07 PM	#29 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	on the stillen bumper there are 2 slits on the front to move air straight to the air intakes, that's exactly where they get full of dirt caked on. I need to clean mine off every 3 track days, if I go longer and its caked with dust/dirt, I can't even pull on an s2k on the straight away......

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pic Request: Fujimura front bumper w/ Amuse rear bumper	Wonka2581	Exterior & Interior	10	04-26-2013 06:43 AM
[WTB] Nismo front bumper/rear bumper	martin82	Parts for sale (Private Classifieds)	6	12-12-2012 06:58 PM
[FOR SALE] SOCAL: OEM PW Front Bumper/Rear Bumper/Side Skirts/Fenders	Fly1 Motorsports	Parts for sale (Private Classifieds)	11	02-03-2012 06:17 PM
MB Front bumper, rear bumper and Side skirts	Jamaica	Parts for sale (Private Classifieds)	9	12-22-2010 12:46 PM
FS:Stock Parts Black~Hood,Sideskirts,Front Bumper,Rear Bumper,Nismo Spoiler,Intakes	Tango	Parts for sale (Private Classifieds)	19	10-04-2010 08:25 PM