GTM High MASS Shift knob poll

Gadgetech · 12-04-2013, 09:00 PM

Quote:

Originally Posted by Matt@GTM

Knob 9 was also completely drawn from scratch to a style I like so some differences between it and the TK knob I can point out from looking at it(I don't have a TK knob to look at so I can't tell you exactly) would be that to make it more comfortable I smoothed the transition from the ball area to the finger hold by filleting it, also it looks like the TK knob is too small for the top of the shift boot whereas this knob will blend to the diameter of the top of the boot nicely. I'm trying to update the poll with the new options if any body has any more requests feel free to tell me.

Quick measurements at the flare on the bottom of the factory and TK knobs -
TK = 1.293
Factory = 1.473
Difference of .18 inch or 4.57 mm

It is smaller but it doesn't look too small.

Xplicit97 · 12-04-2013, 09:21 PM

Will any of these be counter sunk to make the shift knob set lower than stock like the TK knob does?

Sent from my SPH-L710 using Tapatalk 2

SPOHN · 12-04-2013, 09:52 PM

Number 11 looks exactly like my Forged Performance knob. I love the hell out of it.

DEpointfive0 · 12-04-2013, 09:56 PM

Quote:

Originally Posted by XPNSD IT

I would really like an OEM type knob, with leather around the sides, but on top metal circle with the gears engraved in an aluminum brushed finished to match the interior parts. I'll photoshop something later.

You and Chuck can have CFE wrap it in leather for you

1slow370 · 12-05-2013, 12:25 AM

Quote:

Originally Posted by Gadgetech

Quick measurements at the flare on the bottom of the factory and TK knobs -
TK = 1.293
Factory = 1.473
Difference of .18 inch or 4.57 mm

It is smaller but it doesn't look too small.

i like the change, after all this doesn't exactly scream "yup fits great" to me

I like 13 tho too, and the ball on a stick

1slow370 · 12-05-2013, 12:31 AM

Quote:

Originally Posted by Xplicit97

Will any of these be counter sunk to make the shift knob set lower than stock like the TK knob does?

Sent from my SPH-L710 using Tapatalk 2

In the picture i just posted above it doesn't look like the TK is sitting lower than stock, did you just mean if the knob is shorter? Maybe draw a factory knob for comparison?

on that note whats better a tall knob or a short knob? I mean check THESE things out

Gadgetech · 12-05-2013, 04:13 AM

There's a picture comparing the factory and TK knobs somewhere on here and the TK does sit noticeably lower. I'll see if I can find it.

Sent from my Lumia 1020 using Tapatalk

G37sHKS · 12-05-2013, 07:20 AM

Just curious, Is this the same GTM company for turbo kits ?

carlitos_370z · 12-05-2013, 07:24 AM

i vote for the number 9 but i like more the ball look... btw if is possible in burn Ti and if the price is not to high im in

Matt@GTM · 12-05-2013, 12:27 PM

Quote:

Originally Posted by 1slow370

In the picture i just posted above it doesn't look like the TK is sitting lower than stock, did you just mean if the knob is shorter? Maybe draw a factory knob for comparison?

on that note whats better a tall knob or a short knob? I mean check THESE things out

I drew the factory knob at the end of the second row in this pic for size comparison

Matt@GTM · 12-05-2013, 12:28 PM

Quote:

Originally Posted by G37sHKS

Just curious, Is this the same GTM company for turbo kits ?

The same company I got Sam to let me do this in my free time.

Matt@GTM · 12-05-2013, 12:32 PM

Quote:

Originally Posted by carlitos_370z

i vote for the number 9 but i like more the ball look... btw if is possible in burn Ti and if the price is not to high im in

Unless things change the burnt titanium finish is not doable with metal these heavy knobs are made of. A Ti knob would weigh significantly less. All of the knob designs are all over 500grams.

carlitos_370z · 12-05-2013, 12:53 PM

Quote:

Originally Posted by matt@gtm

unless things change the burnt titanium finish is not doable with metal these heavy knobs are made of. A ti knob would weigh significantly less. All of the knob designs are all over 500grams.

man sounds great!!! When you sell this knobs im in for sure.... I dont care if is are made in ti or not

as well in the future i hope to buy the gtm tt kit or the supercharger kit i dont decide yet... But for sure are going to be gtm hahah!!!

XPNSD IT · 12-05-2013, 01:01 PM

Yea I think oem knob looks best, even if the entire knob is brushed aluminum to match interior I think that would be the best design. You can even call it "the drip" lol since if you flip it upside down it looks like water drip off something.

Do some engraved numbers for gears and that would be perfect. I got $50 for it.haha

Chuck33079 · 12-05-2013, 01:17 PM

Quote:

Originally Posted by XPNSD IT

I would really like an OEM type knob, with leather around the sides, but on top metal circle with the gears engraved in an aluminum brushed finished to match the interior parts. I'll photoshop something later.

Basically an OEM G37 knob?

09 13 Infiniti G37 G25 10 13 G35 07 08 Shift Knobs OEM Shifter Knob | eBay

View Poll Results: Which knob do you like most?
1	14	23.33%
2	12	20.00%
3	4	6.67%
4	14	23.33%
5	16	26.67%
Voters: 60. You may not vote on this poll

12-04-2013, 09:21 PM	#32 (permalink)
Xplicit97 Track Member Join Date: May 2011 Location: Bremerton, WA Age: 45 Posts: 875 Drives: 2011 Nismo 370Z Rep Power: 300	Will any of these be counter sunk to make the shift knob set lower than stock like the TK knob does? Sent from my SPH-L710 using Tapatalk 2 __________________ [B]2011 Brilliant Silver Nismo 370Z # 0305, 15 Nismo wide body conversion, Motordyne E370/Art pipes, Stillen G3, Airlift suspension,20X10 /20X12 Avant Garde F111 forged wheels

12-04-2013, 09:52 PM	#33 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Number 11 looks exactly like my Forged Performance knob. I love the hell out of it. __________________

12-05-2013, 04:13 AM	#37 (permalink)
Gadgetech A True Z Fanatic Join Date: Oct 2013 Location: Cumming, Ga Posts: 1,559 Drives: The Short Bus Rep Power: 870	There's a picture comparing the factory and TK knobs somewhere on here and the TK does sit noticeably lower. I'll see if I can find it. Sent from my Lumia 1020 using Tapatalk __________________ Upstate Z Club

12-05-2013, 07:20 AM	#38 (permalink)
G37sHKS A True Z Fanatic Join Date: Feb 2010 Location: Dubai Posts: 1,183 Drives: 09 G37S Coupe 7AT Rep Power: 20	Just curious, Is this the same GTM company for turbo kits ? __________________ G37 BUILD UNDER CONSTRUCTION

12-05-2013, 07:24 AM	#39 (permalink)
carlitos_370z A True Z Fanatic Join Date: Jul 2013 Location: Puerto Rico Posts: 7,157 Drives: 13 Nissan 370Z SP M6 Rep Power: 7586	i vote for the number 9 but i like more the ball look... btw if is possible in burn Ti and if the price is not to high im in

12-05-2013, 01:01 PM	#44 (permalink)
XPNSD IT Enthusiast Member Join Date: Oct 2011 Location: San Jose, CA Posts: 298 Drives: 09 370z/16 Hyper STI Rep Power: 14	Yea I think oem knob looks best, even if the entire knob is brushed aluminum to match interior I think that would be the best design. You can even call it "the drip" lol since if you flip it upside down it looks like water drip off something. Do some engraved numbers for gears and that would be perfect. I got $50 for it.haha littlejuanito likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Shift knob installation? Shift knob recommendations?	Gibby1113	DIY Section (Do-It-Yourself)	21	05-30-2013 08:08 PM
SOLD: 7AT Red/Carbon Shift knob with OEM 6MT Shift boot (SW Florida)	TMAN1985	Parts for sale (Private Classifieds)	8	04-23-2012 10:01 PM
Rattle from Gear Shift Knob @ High RPM's	ksm144	Exterior & Interior	4	10-11-2011 12:43 AM