For you guys with Amuse front bumpers, the underneath

OldFart · 11-25-2013, 10:48 AM

Liquid G provided a picture of the underside of an Amuse front bumper. I'm in dilemma where I want to change my lip or just just go with a new bumper. I already have a brand new ZSpeed undertray (which if I go Amuse will be up for sale) to go on and am contemplating getting a Shine lip or an Nismo S-Tune, already have an Evo-R 3 piece lip (painted Magnetic black with carbon fiber center section - also will be up for sale) piece now.

My question, how much abuse does the underneath of a Abuse bumper take? Sorry, but I'm kinda anal even about how the underside looks, if after a short time under normal driving conditions these look like the wind blew and the **** flew, I'd rather just avoid going the Amuse bumper route. Car isn't a DD, but I do enjoy driving it when it's nice.

I do plan on lowering the car over the winter with coilsovers if that makes any difference. I've looked thru numerous posts but didn't find anything that dealt with this topic.

Boss_302 · 11-25-2013, 11:20 AM

First, how are you going to service the car, Aka change the oil?
The other thing is I guarantee you will chew up the lip on that nose and worst if you lower.
I have stock sport suspension on my Z and I did the NISMO front bumper conversion Now I scrape the bottom of lip getting in and out of driveways that I didn't have problems with before.
One old fart to another!

DEpointfive0 · 11-25-2013, 11:23 AM

Why would you sell the under tray if you got an Amuse?

To see how much you'll scrape, take every time you have scraped and multiply it by 10, then with lowering multiply that by 5

OldFart · 11-25-2013, 11:37 AM

Quote:

Originally Posted by DEpointfive0

Why would you sell the under tray if you got an Amuse?

To see how much you'll scrape, take every time you have scraped and multiply it by 10, then with lowering multiply that by 5

Right now I am not lowered so how many times have I scraped since I owned it - 8 months and about 7000 miles - zero.

I did another post where I asked about the undertray and didn't get many looks, can the undertray be used in conjuntion with an Amuse bumper?

DEpointfive0 · 11-25-2013, 11:40 AM

Quote:

Originally Posted by OldFart

Right now I am not lowered so how many times have I scraped since I owned it - 8 months and about 7000 miles - zero.

I did another post where I asked about the undertray and didn't get many looks, can the undertray be used in conjuntion with an Amuse bumper?

Damn you then, lol
You will be 10 times more PRONE to scraping with the Amuse bumper then

And the under tray should be useable, no reason it wouldn't be.

OldFart · 11-25-2013, 11:58 AM

Quote:

Originally Posted by DEpointfive0

Damn you then, lol
You will be 10 times more PRONE to scraping with the Amuse bumper then

And the under tray should be useable, no reason it wouldn't be.

I was kinda hoping you would say I wouldn't be able to use it so it would give me more reason to not buy one... This sucks...

Rusty · 11-25-2013, 12:08 PM

Looking at that picture. I don't think you can use the Zspeed undertray and that front end together.

I have a stock height Nismo, and I'm getting ready to put on my 3rd black lower piece on my spoiler. When you least expect it. Scrap!

Alstann · 11-25-2013, 12:12 PM

You could add a piece of sheet aluminium to the underside of the bumper, kinda pounded to fit or something. That could help handle the abuse and prevent hard damage to the bumper. I debated doing that on my next lip or bumper setup.

BuckeyeZ · 11-25-2013, 12:41 PM

Quote:

Originally Posted by Boss_302

First, how are you going to service the car, Aka change the oil?

Looks to me like you can just use the hole at the rear of the undertray portion.

Would be a giant PITA if you had to take the fascia off everytime you had to change the oil.

Boss_302 · 11-25-2013, 12:48 PM

When I raced formula fords we use to have rubbing blocks on the chassis so the frames wouldn't get abused from sitting so low to the ground. We would use a phenolic material

wheee! · 11-25-2013, 01:30 PM

I am planning on running strips of teflon like plastic in strategic locations parallel along the bumper and skirts. Just to 'ease' the kit over low spots! Drilled and counter sunk with rivets to the kit.

simota1 · 11-25-2013, 04:16 PM

you wont be able to run a z speed... and yes oil changes were a pain in the *** with this bumper.... the hole is super small (plus oil cooler thermostatic plate that small hole your screwed)... i ended up making a even bigger hole so oil changes were easier... as for the tray... i can imagine you cutting off the diffuser area but then the whole front bumper would be flimpsy....

simota1 · 11-25-2013, 04:20 PM

disregard my post ^^^^ lol i read this last night and saw liquid G's post and was adding to to... im lowered and the main body of the front diffuser has NEVER scraped.... what will scrap thought is the main lip of mouth area... ive scraped that about maybe 3 times now... the correct way of angling and driving will prolong the underneath of your bumper

Z eliminator · 11-25-2013, 04:34 PM

So if you have to work on the lower engine you will have to remove the front bumper to get to it ?

simota1 · 11-25-2013, 04:49 PM

abcolutely.... it sucks... somtimes....

11-25-2013, 10:48 AM	#1 (permalink)
OldFart Track Member Join Date: May 2013 Location: Carlisle, PA Age: 61 Posts: 682 Drives: 2011 Wannabe Nismo Rep Power: 960	For you guys with Amuse front bumpers, the underneath Liquid G provided a picture of the underside of an Amuse front bumper. I'm in dilemma where I want to change my lip or just just go with a new bumper. I already have a brand new ZSpeed undertray (which if I go Amuse will be up for sale) to go on and am contemplating getting a Shine lip or an Nismo S-Tune, already have an Evo-R 3 piece lip (painted Magnetic black with carbon fiber center section - also will be up for sale) piece now. My question, how much abuse does the underneath of a Abuse bumper take? Sorry, but I'm kinda anal even about how the underside looks, if after a short time under normal driving conditions these look like the wind blew and the **** flew, I'd rather just avoid going the Amuse bumper route. Car isn't a DD, but I do enjoy driving it when it's nice. I do plan on lowering the car over the winter with coilsovers if that makes any difference. I've looked thru numerous posts but didn't find anything that dealt with this topic. Last edited by OldFart; 11-25-2013 at 11:02 AM.

11-25-2013, 11:23 AM	#3 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	Why would you sell the under tray if you got an Amuse? To see how much you'll scrape, take every time you have scraped and multiply it by 10, then with lowering multiply that by 5 __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

11-25-2013, 12:08 PM	#7 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,172 Drives: 2011 Nismo GM 6M Rep Power: 2684437	Looking at that picture. I don't think you can use the Zspeed undertray and that front end together. I have a stock height Nismo, and I'm getting ready to put on my 3rd black lower piece on my spoiler. When you least expect it. Scrap! __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html Last edited by Rusty; 11-25-2013 at 12:14 PM.

11-25-2013, 12:12 PM	#8 (permalink)
Alstann Track Member Join Date: Oct 2011 Location: South Florida Posts: 882 Drives: 12 PW 370z 6MT Sport Rep Power: 15	You could add a piece of sheet aluminium to the underside of the bumper, kinda pounded to fit or something. That could help handle the abuse and prevent hard damage to the bumper. I debated doing that on my next lip or bumper setup. __________________ 2012 Pearl White 370Z GReddy Twin Turbo

11-25-2013, 12:48 PM	#10 (permalink)
Boss_302 Base Member Join Date: Feb 2013 Location: NY NY Posts: 150 Drives: 11 Nissan 370z S Mt Rep Power: 12	When I raced formula fords we use to have rubbing blocks on the chassis so the frames wouldn't get abused from sitting so low to the ground. We would use a phenolic material JamesTheBrain likes this.

11-25-2013, 11:20 AM	#2 (permalink)
Boss_302 Base Member Join Date: Feb 2013 Location: NY NY Posts: 150 Drives: 11 Nissan 370z S Mt Rep Power: 12	First, how are you going to service the car, Aka change the oil? The other thing is I guarantee you will chew up the lip on that nose and worst if you lower. I have stock sport suspension on my Z and I did the NISMO front bumper conversion Now I scrape the bottom of lip getting in and out of driveways that I didn't have problems with before. One old fart to another!

11-25-2013, 01:30 PM	#11 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 57 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40182	I am planning on running strips of teflon like plastic in strategic locations parallel along the bumper and skirts. Just to 'ease' the kit over low spots! Drilled and counter sunk with rivets to the kit. __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal

11-25-2013, 04:16 PM	#12 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	you wont be able to run a z speed... and yes oil changes were a pain in the * with this bumper.... the hole is super small (plus oil cooler thermostatic plate that small hole your screwed)... i ended up making a even bigger hole so oil changes were easier... as for the tray... i can imagine you cutting off the diffuser area but then the whole front bumper would be flimpsy.... TerribleONE and wheee! like this. __________________ TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/**

11-25-2013, 04:20 PM	#13 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	disregard my post ^^^^ lol i read this last night and saw liquid G's post and was adding to to... im lowered and the main body of the front diffuser has NEVER scraped.... what will scrap thought is the main lip of mouth area... ive scraped that about maybe 3 times now... the correct way of angling and driving will prolong the underneath of your bumper wheee! likes this. __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

11-25-2013, 04:34 PM	#14 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 19	So if you have to work on the lower engine you will have to remove the front bumper to get to it ? __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

11-25-2013, 04:49 PM	#15 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	abcolutely.... it sucks... somtimes.... __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] Stillen, Nismo, or Amuse bumpers	DEpointfive0	Parts for sale (Private Classifieds)	33	05-30-2012 12:41 AM
WTB: Stillen, Nismo, or Amuse bumpers	DEpointfive0	Body Interior/Exterior	13	04-26-2012 11:18 AM
Stillen, Nismo, or Amuse bumpers	DEpointfive0	Wanted	11	04-10-2012 10:30 AM
WTB: Front & Rear bumpers!	CrownR426	Wanted	1	09-08-2010 06:26 PM
Powerhouse Amuse RS Silent Exhaust with Amuse Cats & Amuse Front Pipe	abgyak	Intake/Exhaust	3	04-14-2010 05:43 AM