I need some info. Please.

RZ14 · 10-14-2013, 05:10 PM

Does any one know how to remove the silver aluminum section of this door panel? It appears to have two rivet type locks near the top.

RZ14 · 11-26-2013, 10:40 AM

Still havent had any luck with the panel. Anyone out there have an answer?

Sent from my SAMSUNG-SGH-I317 using Tapatalk

falconfixer · 11-26-2013, 11:27 AM

I can't see the rivets your are talking about but if so, you might have to drill them out. The silver nuts on the bottom are for your window and I recommend downloading that portion of the service manual. Looks like you'll have to pop off the window motor also.

Curious to why you are removing it? Unless weight reduction, it's going to be a pain in the *** to put back together.

RZ14 · 11-26-2013, 11:52 AM

Im have a slight rattle in the window when its rolled fully. Even if the door is open and I knock on the molding inside it'll make the sound. It honestly sounds like the glass itself. Ive tightened all the bolts in the door mold and throughout the entire door are. Including the plastic cowling before the mirror. I am assuming the noise is in the window rail assembly and am unable to reach it with the panel on.

Sent from my SAMSUNG-SGH-I317 using Tapatalk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
new car info	afgiussppe	Nissan 370Z Pricing / Ordering Discussions	12	02-22-2012 07:27 PM
Need Info	BernieB	Intake/Exhaust	3	08-17-2010 12:51 PM
Info	ogm.k4b	New 370Z Owner	6	11-22-2009 05:11 PM
HFC Cel Info	BerkTech	Intake/Exhaust	26	08-01-2009 04:26 AM
Need some info.	bossman	The Lounge (Off Topic)	5	01-09-2009 01:28 AM

11-26-2013, 10:40 AM	#2 (permalink)
RZ14 Base Member Join Date: Mar 2013 Location: SoCal Posts: 80 Drives: '10 370z 40th Rep Power: 12	Still havent had any luck with the panel. Anyone out there have an answer? Sent from my SAMSUNG-SGH-I317 using Tapatalk

11-26-2013, 11:27 AM	#3 (permalink)
falconfixer Track Member Join Date: Feb 2012 Location: 10aC Posts: 978 Drives: Taco Rep Power: 76	I can't see the rivets your are talking about but if so, you might have to drill them out. The silver nuts on the bottom are for your window and I recommend downloading that portion of the service manual. Looks like you'll have to pop off the window motor also. Curious to why you are removing it? Unless weight reduction, it's going to be a pain in the *** to put back together.

11-26-2013, 11:52 AM	#4 (permalink)
RZ14 Base Member Join Date: Mar 2013 Location: SoCal Posts: 80 Drives: '10 370z 40th Rep Power: 12	Im have a slight rattle in the window when its rolled fully. Even if the door is open and I knock on the molding inside it'll make the sound. It honestly sounds like the glass itself. Ive tightened all the bolts in the door mold and throughout the entire door are. Including the plastic cowling before the mirror. I am assuming the noise is in the window rail assembly and am unable to reach it with the panel on. Sent from my SAMSUNG-SGH-I317 using Tapatalk