Nissan 370Z Forum - Yaw sensor switch

Page 3 of 3

Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)

- Exterior & Interior (http://www.the370z.com/exterior-interior/)

- - Yaw sensor switch (http://www.the370z.com/exterior-interior/74324-yaw-sensor-switch.html)

SouthArk370Z

05-30-2016 06:22 AM

Quote:

Originally Posted by sschaffer27 (Post 3489324)

I was doing this mod and installing an LED rocker switch, when i accidentally touched a wire to the hand brake bolt. ... Did I fry a bunch of electronics or is there a blown fuse that I'm missing??

IIRC, there are two fuse blocks: one near to the driver door hinge (easy to get to) and the other next to the battery (PITA to get to).

The FSM will have wiring diagrams, diagnostic procedures, fuse locations, &c.

Disconnect the battery when doing electrical work.

pokeyl

05-30-2016 05:51 PM

http://www.the370z.com/engine-drivet...etely-off.html
another thread

Last, if you could turn the sensor 90 degrees, it would not not have any input?

sschaffer27

05-31-2016 06:45 AM

Quote:

Originally Posted by pokeyl (Post 3489688)

http://www.the370z.com/engine-drivet...etely-off.html
another thread

Last, if you could turn the sensor 90 degrees, it would not not have any input?

Thanks Pokey. I got it figured out in another thread. I forgot about the large fuse box in the battery compartment. Then after going for a spin around the neighborhood, the other items fixed themselves.

Sent from my iPhone using Tapatalk

370Zoey

08-09-2017 10:13 PM

Sounds Like you either blew the ABS fuse or actually Fried the ABS control Module. Same issues if you disconnect the connector that goes to the module.

All times are GMT -5. The time now is 06:40 PM.

Page 3 of 3

Show 40 post(s) from this thread on one page