Porter Cable 7424XP Polisher

dlmartin81 · 07-31-2009, 12:29 AM

I just received mine today from ProperAutoCare. I can't wait to use it; however, I just applied polish and sealant a couple of weeks ago by hand, so it would be a wait to remove it and re-apply it with the machine. I think the best thing to do is wait till fall to do it all over again. But I don't know. I'm really curious to see how much better it will turn out. Therefore, I'm tempted to use it right away....hehe.

Does anyone have any experience with this polisher?

Quote:

ProperAutoCare-- The new Porter Cable 7424XP Ultimate Detailing Machine incorporates a random, swirl-free polishing action that will not scratch or burn the paint or clear coat. An electronic variable speed control allows you to adjust the speed from 2,500 to 6,800 OPM. A heavy duty, 4.5 amp motor supplies plenty of torque and the machine is double insulated against shock.

antennahead · 07-31-2009, 12:44 AM

Quote:

Originally Posted by dlmartin81

I just received mine today from ProperAutoCare. I can't wait to use it; however, I just applied polish and sealant a couple of weeks ago by hand, so it would be a wait to remove it and re-apply it with the machine. I think the best thing to do is wait till fall to do it all over again. But I don't know. I'm really curious to see how much better it will turn out. Therefore, I'm tempted to use it right away....hehe.

Does anyone have any experience with this polisher?

I have one and with proper use they work very well. If you just did it by hand, I would personally wait until you need to do it again. I assume the hand polish removed any hairline scratches and swirl marks...... if it did, no need to re-do it until it is needed again. The porter cable will speed up the process and make polishing a breeze. I still apply and remove my Meguires NXT tech wax sealant by hand, after the clay bar and porter cable polish. Since the finish on the 370 is new, and in great shape sans a few hairline scratches, I use Pinnacle XMT Ultra Fine Swirl Remover from Autogeek ..... works great and sets up the finish for the Meguiars.

John

dlmartin81 · 07-31-2009, 09:18 AM

^^ Nice....thanks for sharing the tips and experience.

Yeah, getting this polisher seemed like win-win. It safely removes minor to moderate imperfections without it itself causing any harm to the clear coat and paint.

nogoodname · 07-31-2009, 09:22 AM

i have the older model PC and it works great...sucks that i bought it like a month before the new model came out....

dlmartin81 · 07-31-2009, 09:26 AM

^^ Oh crap. I hate when stuff like that happens. But I'm sure they both work well and produce the same results. In the video I posted, they used the older model and it appears to be freakin awesome. I'm amazed at how good of a job it does. And best of all, it causes no harm to the paint/cc, and any fool, like myself can use.

nogoodname · 07-31-2009, 09:29 AM

the only difference is the casing and motor. it went from 3.5 amps to 4 amps

GMZ · 07-31-2009, 10:21 AM

I need to get on the ball and order one of these, the PC have a better warranty than the Meguiars one too. I would use it now! Why wait? Practice getting that perfect result in the summer while its nice out.

nogoodname · 07-31-2009, 10:24 AM

i ordered and mine came in a week...including passing through Canada customs

dlmartin81 · 07-31-2009, 10:30 AM

^^ Mine took less than a week to arrive from the purchase date. Of course that all depends on your location.

nogoodname · 07-31-2009, 10:32 AM

the canadian customs open the boxes to see what's inside like all the time

dlmartin81 · 07-31-2009, 11:04 AM

DAMN! That's gotta be annoying, huh?

OWSIU · 08-01-2009, 04:21 PM

You got pads and a backing plate for it right? The white pad it comes with is no good.

I just got a 7424xp a few weeks back, so far I've only used it for light polishing and waxing. It's so much quicker and easier to wax with a PC.

spearfish25 · 08-01-2009, 05:32 PM

I've been using a crappy $30 random orbit buffer from Pep Boys (Black and Decker). It definitely beats removing wax by hand and does a nice job. My one gripe is that it vibrates the daylights out of my hand which goes numb by the time the job is done. Does the Porter Cable solve that issue with the two hand grip (and probably much better design)?

spearfish25 · 08-01-2009, 05:33 PM

Quote:

Originally Posted by nogoodname

the canadian customs open the boxes to see what's inside like all the time

Which explains why an iPhone I sent to a person in Canada was missing from the shipping box when UPS delivered it to my buyer...

dlmartin81 · 08-01-2009, 10:20 PM

Quote:

Originally Posted by OWSIU

You got pads and a backing plate for it right? The white pad it comes with is no good.

I just got a 7424xp a few weeks back, so far I've only used it for light polishing and waxing. It's so much quicker and easier to wax with a PC.

Well my PC is slightly different than the stock one. The company that I ordered from replaces the stock backing plate and pads with their own. I don't know if it's 'their own' their own but they replace them with better ones, they say. They also provide you with extra pads for a complete polish and wax/sealant job.

I don't know if you're refering to the stock or to this one. This is what I got.

07-31-2009, 10:21 AM	#7 (permalink)
GMZ Enthusiast Member Join Date: Jun 2009 Location: Virginia Beach Posts: 304 Drives: 07 V8 4Runner 4x4 Rep Power: 16	I need to get on the ball and order one of these, the PC have a better warranty than the Meguiars one too. I would use it now! Why wait? Practice getting that perfect result in the summer while its nice out. __________________ Z-less once again

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ipod cable for base AUX input	cg370z	Audio & Video	7	05-10-2009 05:57 PM
3 hours, Porter Cable, Adams and Car Brite	Nikon FM	Exterior & Interior	15	03-16-2009 10:15 PM
Ideas on how to best hide the 3.5mm AUX cable coming out of stock/base stereo?	k.alexander	Audio & Video	17	03-05-2009 02:46 PM
iPod connector cable?	dandg	Nissan 370Z General Discussions	9	02-05-2009 10:02 PM

07-31-2009, 09:18 AM	#3 (permalink)
dlmartin81 Track Member Join Date: Dec 2008 Location: Chalfont, PA Age: 43 Posts: 923 Drives: 09 370Z Rep Power: 607	^^ Nice....thanks for sharing the tips and experience. Yeah, getting this polisher seemed like win-win. It safely removes minor to moderate imperfections without it itself causing any harm to the clear coat and paint.

07-31-2009, 09:22 AM	#4 (permalink)
nogoodname Lifetime Premium Join Date: Nov 2008 Location: Montreal Posts: 22,357 Drives: E46 M3 Rep Power: 1765	i have the older model PC and it works great...sucks that i bought it like a month before the new model came out....

07-31-2009, 09:26 AM	#5 (permalink)
dlmartin81 Track Member Join Date: Dec 2008 Location: Chalfont, PA Age: 43 Posts: 923 Drives: 09 370Z Rep Power: 607	^^ Oh crap. I hate when stuff like that happens. But I'm sure they both work well and produce the same results. In the video I posted, they used the older model and it appears to be freakin awesome. I'm amazed at how good of a job it does. And best of all, it causes no harm to the paint/cc, and any fool, like myself can use.

07-31-2009, 09:29 AM	#6 (permalink)
nogoodname Lifetime Premium Join Date: Nov 2008 Location: Montreal Posts: 22,357 Drives: E46 M3 Rep Power: 1765	the only difference is the casing and motor. it went from 3.5 amps to 4 amps

07-31-2009, 10:24 AM	#8 (permalink)
nogoodname Lifetime Premium Join Date: Nov 2008 Location: Montreal Posts: 22,357 Drives: E46 M3 Rep Power: 1765	i ordered and mine came in a week...including passing through Canada customs

07-31-2009, 10:30 AM	#9 (permalink)
dlmartin81 Track Member Join Date: Dec 2008 Location: Chalfont, PA Age: 43 Posts: 923 Drives: 09 370Z Rep Power: 607	^^ Mine took less than a week to arrive from the purchase date. Of course that all depends on your location.

07-31-2009, 10:32 AM	#10 (permalink)
nogoodname Lifetime Premium Join Date: Nov 2008 Location: Montreal Posts: 22,357 Drives: E46 M3 Rep Power: 1765	the canadian customs open the boxes to see what's inside like all the time

07-31-2009, 11:04 AM	#11 (permalink)
dlmartin81 Track Member Join Date: Dec 2008 Location: Chalfont, PA Age: 43 Posts: 923 Drives: 09 370Z Rep Power: 607	DAMN! That's gotta be annoying, huh?

08-01-2009, 04:21 PM	#12 (permalink)
OWSIU Base Member Join Date: Apr 2009 Location: California Posts: 40 Drives: 06 Infiniti G35 Rep Power: 16	You got pads and a backing plate for it right? The white pad it comes with is no good. I just got a 7424xp a few weeks back, so far I've only used it for light polishing and waxing. It's so much quicker and easier to wax with a PC.

08-01-2009, 05:32 PM	#13 (permalink)
spearfish25 A True Z Fanatic Join Date: Mar 2009 Location: Naples, FL Posts: 4,117 Drives: to work Rep Power: 1856	I've been using a crappy $30 random orbit buffer from Pep Boys (Black and Decker). It definitely beats removing wax by hand and does a nice job. My one gripe is that it vibrates the daylights out of my hand which goes numb by the time the job is done. Does the Porter Cable solve that issue with the two hand grip (and probably much better design)?