Aftermarket Steering Wheel Hub Issues

kenchan · 05-18-2015, 12:28 PM

Quote:

Originally Posted by RayMaN

These?

Works Bell Rapfix II Quick Release Steering Wheel Hub Spacer Ball Lock Black | eBay

Daikei Boss Hub Kit for Nissan 350Z 370Z Plug and Play Nardi Momo | eBay

i dont use the quick release type on my G as the theme is dressup, not tuner car sports theme. the regular type that looks similar to the daikei you linked looks similar to my works bell hub.

kenchan · 05-18-2015, 12:30 PM

btw, i luv this alignment spacer. just in case your splines dont line up perfectly:

daikei as01. i have the one that works on my Momo in my G. perfect Noon each and every time.

FairladyZ10PG · 12-20-2015, 01:00 AM

I had a new personal steering wheel installed and it now throws the vdc off and skid lights on.
I read somewhere that steering position sensor may cause this and my steering wheel is sitting at 10 oclock position while driving straight.
The light goes off for a little bit after restarting but comes back on after 5 mins of driving.
I didn't have time to get alignment done today but will get it done soon.
Will getting alignment and correcting the steering position sensor fix this?

madeinjapan · 10-21-2016, 11:41 AM

Quote:

Originally Posted by definitionxmk

^thanks! Yeah i called NRG earlier and we DO have to remove the clockspring. All it was is to remove the bottom plastic housing and getting to the three screws tying the whole clockspring unit down. While removing the clockspring, there are two clips on each side of the unit... once you get them out, wiggle it free. Place the hub on top then screw it down. Replace the bottom plastic for the housing and you are ready to install the aftermarket steering wheel.

WARNING the air bag, VDC OFF, and the slip light (all three) will be on. I forgot to mention having to plug in the horn adapter but i didnt do that because i could not find instructions/directions on what holes i had to plug them in. ill post some pics when i get home.

any pics of this?

cooltoy · 10-22-2016, 01:51 AM

madeinjapan · 10-24-2016, 08:05 AM

Quote:

Originally Posted by dimitarm

All of you who are planning to buy nrg hubs for their 370z's please dont do it, it is a waste of money!!!!

Quote:

Originally Posted by definitionxmk

^thanks! Yeah i called NRG earlier and we DO have to remove the clockspring. All it was is to remove the bottom plastic housing and getting to the three screws tying the whole clockspring unit down. While removing the clockspring, there are two clips on each side of the unit... once you get them out, wiggle it free. Place the hub on top then screw it down. Replace the bottom plastic for the housing and you are ready to install the aftermarket steering wheel.

WARNING the air bag, VDC OFF, and the slip light (all three) will be on. I forgot to mention having to plug in the horn adapter but i didnt do that because i could not find instructions/directions on what holes i had to plug them in. ill post some pics when i get home.

Quote:

Originally Posted by dimitarm

Here is the actual situation of my steering wheel removed...my problem is that i cant fit the nrg hub...please suggest some solution...i am desperate

ok update

all you have to do is dremel off the right connector

unless your wheel uses it then you might be out of luck (mine didnt)

also

he is right it is the 3rd wire from the right not the left nrg messed up for the horn

easy fix also tho unclip the connector and pull the wire out

12-20-2015, 01:00 AM	#33 (permalink)
FairladyZ10PG A True Z Fanatic Join Date: Aug 2010 Location: SoCal-IE Posts: 1,890 Drives: PGraphite m6 Rep Power: 255	I had a new personal steering wheel installed and it now throws the vdc off and skid lights on. I read somewhere that steering position sensor may cause this and my steering wheel is sitting at 10 oclock position while driving straight. The light goes off for a little bit after restarting but comes back on after 5 mins of driving. I didn't have time to get alignment done today but will get it done soon. Will getting alignment and correcting the steering position sensor fix this? __________________ ///MPPSK///M Performance FRONT SPLITTER///M Performance KIDNEY GRILLS///MPerformance CF MIRRORS///MPerformance CF SPOILER///AC SCHNITZER

10-22-2016, 01:51 AM	#35 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,973 Drives: 14 PW 370Z S/T MT Rep Power: 243722	__________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2009 Steering Wheel Lock; anyone issues?	Mikes350z	North East Region	2	07-09-2012 04:38 PM
Steering wheel controls and aftermarket wheel	Perf.Des	Exterior & Interior	11	03-03-2012 03:29 PM
Aftermarket Steering wheel issue	Calvin	Exterior & Interior	1	02-03-2012 07:33 AM
anyone has aftermarket racing steering wheel?	dudesky	Exterior & Interior	21	12-26-2011 08:39 AM
Help with Aftermarket Steering Wheel Install	karotZ	Nissan 370Z General Discussions	20	08-22-2011 05:10 AM

05-18-2015, 12:30 PM	#32 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	btw, i luv this alignment spacer. just in case your splines dont line up perfectly: daikei as01. i have the one that works on my Momo in my G. perfect Noon each and every time.