Aftermarket Steering Wheel Hub Issues

SPOHN · 10-02-2013, 08:26 AM

Quote:

Originally Posted by dimitarm

Guys if i remove the clockspring behind the steering wheel and airbag light comes on, does that mean that all of the airbags in the car will go off?

No. Just unplug the battery and let it sit for 10 minutes. Just a safe practice

scruffydog · 01-25-2014, 08:09 PM

Any update on this guys?

I just bought a Bell Works short hub and it came with 2 bypass for harness and a horn harness. NONE of it works.

The horn harness isn't plug and play, i'm sure the wiring is wrong.
And also the airbag, VDC, traction control light is on.

Liquid_G · 01-27-2014, 10:53 AM

Quote:

Originally Posted by scruffydog

Any update on this guys?

I just bought a Bell Works short hub and it came with 2 bypass for harness and a horn harness. NONE of it works.

The horn harness isn't plug and play, i'm sure the wiring is wrong.
And also the airbag, VDC, traction control light is on.

Sounds like you might have tripped something while installing the hub.. or some other issue. Try resetting the ECU to clear those lights? I have the same setup and didn't have any issues.

scruffydog · 01-29-2014, 02:44 PM

thanks turns out I had the clockspring & the hub mis-aligned with the actual steering axle. My marks didn't line up b/c I accidentally used the wrong tick mark for alignment.

By the way, I have a Works Bell Short hub and didn't have any issues with needing to remove any clock spring.

My Hub kit came with 2 fuses which attaches to the orange and yellow plug and it does plug and play and does not trip on the VDC or Traction control.

However, I'm still having issue getting the horn to work because i think the wiring harness provided (wire location) is incorrect.

Also my air bag light is not turning off due to my aftermarket seat. even with a 4.7 ohm 1/2Watt resistor 5% error and reset procedure, i'm still stuck with a flashing Airbag light. I even tried 2 different brand ones too....frustrated.

Hope this helps everyone, any help back with the horn or seat airbag would be appreciated. I've followed the other thread but still no luck.

mjch3n · 02-01-2014, 03:08 PM

Quote:

Originally Posted by scruffydog

thanks turns out I had the clockspring & the hub mis-aligned with the actual steering axle. My marks didn't line up b/c I accidentally used the wrong tick mark for alignment.

By the way, I have a Works Bell Short hub and didn't have any issues with needing to remove any clock spring.

My Hub kit came with 2 fuses which attaches to the orange and yellow plug and it does plug and play and does not trip on the VDC or Traction control.

However, I'm still having issue getting the horn to work because i think the wiring harness provided (wire location) is incorrect.

Also my air bag light is not turning off due to my aftermarket seat. even with a 4.7 ohm 1/2Watt resistor 5% error and reset procedure, i'm still stuck with a flashing Airbag light. I even tried 2 different brand ones too....frustrated.

Hope this helps everyone, any help back with the horn or seat airbag would be appreciated. I've followed the other thread but still no luck.

Which wheel do you have? I have the works bell short hub too (for the Z34), and it works great. The Personal horn that I have grounds directly to the inside of the quick release/hub, so I never got that to work. Not sure why yours doesn't work though.
For the seat, are you using a 4.7ohm or 4.7K ohm resistor? I couldn't find the right one at Radioshack, so I picked up a group of 10ohm 1/2watt resistors and wired 3 of them in parallel which gives me 3.3ohms. You should be able to find these at any local radioshack. I cut the plug off the airbag side and soldered them on there, no problems.

synolimit · 03-15-2014, 01:57 AM

If the abs, airbag, VDC, traction control ect all the lights where on, what does that mean for everything?

You no longer in an accident could set off ANY air bag?

The traction controlled is disabled, the same as if you pushed the button off?

You no longer have VDC as if you unplugged the yaw sensor?

And what about abs? Your brakes are 50/50 I know if you pull the abs fuse. Is this the same thing?

///PureSwank · 01-09-2015, 10:38 PM

So how are those black connectors removed? I really didn't understand because the pictures showing the illustrations are broken.

///PureSwank · 01-10-2015, 12:42 AM

Quote:

Originally Posted by definitionxmk

^thanks! Yeah i called NRG earlier and we DO have to remove the clockspring. All it was is to remove the bottom plastic housing and getting to the three screws tying the whole clockspring unit down. While removing the clockspring, there are two clips on each side of the unit... once you get them out, wiggle it free. Place the hub on top then screw it down. Replace the bottom plastic for the housing and you are ready to install the aftermarket steering wheel.

WARNING the air bag, VDC OFF, and the slip light (all three) will be on. I forgot to mention having to plug in the horn adapter but i didnt do that because i could not find instructions/directions on what holes i had to plug them in. ill post some pics when i get home.

Any pictures for this process? I'm confused.....

RayMaN · 05-14-2015, 07:47 AM

Quote:

Originally Posted by dimitarm

All of you who are planning to buy nrg hubs for their 370z's please dont do it, it is a waste of money!!!!

I'm thinking of changing mine.. Any advice on which works best? I'm new at this and don't want to mess it up.

kenchan · 05-14-2015, 09:00 AM

i currently use a WorksBell on my G with a MOMO steering wheel. very nice.

i'd get that or a Daikei if they are available for our cars. they come with the two resistors and easy to install.

i lol'ed at that nissan takata airbag recall. my G might be included but the steering wheel is in my storage ready for self combustion.

i guess i will aim it at my dumbarse neighbor's house.

dimitarm · 05-14-2015, 09:10 AM

Quote:

Originally Posted by RayMaN

I'm thinking of changing mine.. Any advice on which works best? I'm new at this and don't want to mess it up.

it can be done but there is some cutting of the hub required.
I have a post here on the forum showing how it should be done.
find it and if you still dont understand feel free to ask me.
Btw i have Nrg hub + Nrg Quick release + momo steering installed.
Vdc, Abs, Airbag everything is working normal.
The only downside is you cant use the cruise control.

nismo13807 · 05-14-2015, 11:39 PM

anyone got their horn to work? i have the works bell short hub and nrg quick release with sparco wheel

RayMaN · 05-15-2015, 10:40 PM

Quote:

Originally Posted by kenchan

i currently use a WorksBell on my G with a MOMO steering wheel. very nice.

i'd get that or a Daikei if they are available for our cars. they come with the two resistors and easy to install.

i lol'ed at that nissan takata airbag recall. my G might be included but the steering wheel is in my storage ready for self combustion.

i guess i will aim it at my dumbarse neighbor's house.

These?

http://www.ebay.com/itm/WORKS-BELL-R...7733f4&vxp=mtr

http://www.ebay.com/itm/Daikei-Boss-...82e673&vxp=mtr

kenchan · 05-16-2015, 08:02 AM

Its one wire for the horn on urs right? Wat I do is make a pigtail wire and sandwich it between the hub and steering wheel to make ground. GL

///PureSwank · 05-17-2015, 01:00 AM

01-25-2014, 08:09 PM	#17 (permalink)
scruffydog A True Z Fanatic Join Date: Jan 2009 Location: Nor Cal Posts: 1,113 Drives: with his eyes close Rep Power: 717	Any update on this guys? I just bought a Bell Works short hub and it came with 2 bypass for harness and a horn harness. NONE of it works. The horn harness isn't plug and play, i'm sure the wiring is wrong. And also the airbag, VDC, traction control light is on. __________________ Magnetic Black 2010 370z Scruffydog's Journal

03-15-2014, 01:57 AM	#21 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3389	If the abs, airbag, VDC, traction control ect all the lights where on, what does that mean for everything? You no longer in an accident could set off ANY air bag? The traction controlled is disabled, the same as if you pushed the button off? You no longer have VDC as if you unplugged the yaw sensor? And what about abs? Your brakes are 50/50 I know if you pull the abs fuse. Is this the same thing? __________________ 13 370z-

01-09-2015, 10:38 PM	#22 (permalink)
///PureSwank Track Member Join Date: Mar 2012 Location: Earth Posts: 954 Drives: 2009 370z Rep Power: 14	So how are those black connectors removed? I really didn't understand because the pictures showing the illustrations are broken. __________________ Last edited by ///PureSwank; 01-09-2015 at 11:51 PM.

05-14-2015, 09:00 AM	#25 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	i currently use a WorksBell on my G with a MOMO steering wheel. very nice. i'd get that or a Daikei if they are available for our cars. they come with the two resistors and easy to install. i lol'ed at that nissan takata airbag recall. my G might be included but the steering wheel is in my storage ready for self combustion. i guess i will aim it at my dumbarse neighbor's house. RayMaN likes this.

05-17-2015, 01:00 AM	#30 (permalink)
///PureSwank Track Member Join Date: Mar 2012 Location: Earth Posts: 954 Drives: 2009 370z Rep Power: 14	__________________

05-14-2015, 11:39 PM	#27 (permalink)
nismo13807 Enthusiast Member Join Date: Jan 2013 Location: Illinois Posts: 340 Drives: 2013 Nismo 370z Rep Power: 3367	anyone got their horn to work? i have the works bell short hub and nrg quick release with sparco wheel

05-16-2015, 08:02 AM	#29 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	Its one wire for the horn on urs right? Wat I do is make a pigtail wire and sandwich it between the hub and steering wheel to make ground. GL

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2009 Steering Wheel Lock; anyone issues?	Mikes350z	North East Region	2	07-09-2012 04:38 PM
Steering wheel controls and aftermarket wheel	Perf.Des	Exterior & Interior	11	03-03-2012 03:29 PM
Aftermarket Steering wheel issue	Calvin	Exterior & Interior	1	02-03-2012 07:33 AM
anyone has aftermarket racing steering wheel?	dudesky	Exterior & Interior	21	12-26-2011 08:39 AM
Help with Aftermarket Steering Wheel Install	karotZ	Nissan 370Z General Discussions	20	08-22-2011 05:10 AM