what clear bra are you using?

fairlady_z34 · 05-16-2013, 05:20 PM

planning to get clear bra the next week or so. just wondering what you guys are using and or would recommend?

kenchan · 05-16-2013, 05:21 PM

im using a scotch roll 6" width down along the side rockers. bought it from amazon.

works great to prevent kickup knicks

urbanate · 05-16-2013, 05:25 PM

I'm pretty sure mine is the Ventura shield and I still have issues on the headlights. It's a thicker one and they just can't keep it stuck around the bubble in the headlight. They are going to try one of the thinner films on the headlights to see if it will stay put.

Wabbyyy · 05-16-2013, 05:42 PM

I'm a boy, i don't wear bras.

JK

Gotta get one soon. Heard its well worth the $$

Haboob · 05-16-2013, 05:50 PM

I believe this is what was used on mine:

SunTek Top Coat.

However, it does have to be stretched quite a bit on the front bumper and I have a small triangle that's come up from the bumper. Had the guy cut it once and it came up again, I'm afraid to keep trimming it, fearing it will need to be redone.

Also, it was penetrated by a sharp rock.

This is the first clear bra I have used, so I'm not sure if that's the norm. It's done pretty well otherwise. I can see marks where it's been hit hard too, but wasn't penetrated.

fairlady_z34 · 05-16-2013, 07:37 PM

lol.. what luck i have, after posting this on the way home from work some douche bag ran over a piece of plastic of some sort and that thing flew straight to my bumper. my FK'IN bumper have a pretty nasty scrap now.. will have to find someone to touch up my bumper now :*{

dennis26 · 05-16-2013, 07:45 PM

XPEL. Been on 2 years with no problems.

Nailzs · 05-16-2013, 09:37 PM

I use a coat of Klasse All-In-One acrylic wax and stay as far away from the rearend of traffic ahead of me as particle. Saves me at least $500.00 and chipped paint.

silentnightz · 05-16-2013, 10:11 PM

I use 3m Scotchgard so far so good saved me from many rock chips and scratches.

Leuz · 05-17-2013, 12:31 AM

3M Venture shield - Front bumper, full hood, side fenders and rearview mirrors

05-16-2013, 05:20 PM	#1 (permalink)
fairlady_z34 Track Member Join Date: May 2013 Location: socal Posts: 568 Drives: 09 370z touring Rep Power: 13	what clear bra are you using? planning to get clear bra the next week or so. just wondering what you guys are using and or would recommend?

05-16-2013, 05:42 PM	#4 (permalink)
Wabbyyy Base Member Join Date: Feb 2013 Location: New Jersey Age: 31 Posts: 126 Drives: 2009 370z Rep Power: 12	I'm a boy, i don't wear bras. JK Gotta get one soon. Heard its well worth the $$ __________________ 2009 370z.

05-16-2013, 10:11 PM	#9 (permalink)
silentnightz Base Member Join Date: Jan 2012 Location: North Jersey Posts: 90 Drives: 12 370z Silver Auto Rep Power: 13	I use 3m Scotchgard so far so good saved me from many rock chips and scratches. __________________

05-17-2013, 12:31 AM	#10 (permalink)
Leuz Track Member Join Date: Nov 2012 Location: NorCal Posts: 555 Drives: Bunny Rep Power: 14	3M Venture shield - Front bumper, full hood, side fenders and rearview mirrors __________________ 2013 PW 370Z Touring+Sport, NAV Tint 35% side, 18% back \| RJM clutch pedal \| ZSpeed SS lines \| Stillen Gen3 CAI \| Fast Intentions HFC and TDX 12'' CF CBE \| UpRev

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Clear Bra or Xpel CLear Bra?	snizzle	Nissan 370Z General Discussions	32	03-18-2013 08:42 PM
Anyone Use Clear Plastidip in place of Clear Bra?	sv nismo	Exterior & Interior	13	10-11-2012 10:01 AM
clear bras are sheets of clear laminate film?	elm_tx	Exterior & Interior	9	08-25-2010 09:46 AM
Clear Bra for Under Z?	OldGuy	Nissan 370Z General Discussions	7	01-04-2010 07:48 AM

05-16-2013, 05:21 PM	#2 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	im using a scotch roll 6" width down along the side rockers. bought it from amazon. works great to prevent kickup knicks

05-16-2013, 05:25 PM	#3 (permalink)
urbanate Base Member Join Date: Oct 2012 Location: Land of Oz Posts: 43 Drives: 2013 PW Rep Power: 13	I'm pretty sure mine is the Ventura shield and I still have issues on the headlights. It's a thicker one and they just can't keep it stuck around the bubble in the headlight. They are going to try one of the thinner films on the headlights to see if it will stay put.

05-16-2013, 05:50 PM	#5 (permalink)
Haboob A True Z Fanatic Join Date: Aug 2012 Location: Surface of the sun. Posts: 13,159 Drives: '18 GTI Autobahn DSG Rep Power: 1387	I believe this is what was used on mine: SunTek Top Coat. However, it does have to be stretched quite a bit on the front bumper and I have a small triangle that's come up from the bumper. Had the guy cut it once and it came up again, I'm afraid to keep trimming it, fearing it will need to be redone. Also, it was penetrated by a sharp rock. This is the first clear bra I have used, so I'm not sure if that's the norm. It's done pretty well otherwise. I can see marks where it's been hit hard too, but wasn't penetrated.

05-16-2013, 07:37 PM	#6 (permalink)
fairlady_z34 Track Member Join Date: May 2013 Location: socal Posts: 568 Drives: 09 370z touring Rep Power: 13	lol.. what luck i have, after posting this on the way home from work some douche bag ran over a piece of plastic of some sort and that thing flew straight to my bumper. my FK'IN bumper have a pretty nasty scrap now.. will have to find someone to touch up my bumper now :*{

05-16-2013, 07:45 PM	#7 (permalink)
dennis26 Enthusiast Member Join Date: Aug 2011 Location: Alabama Posts: 314 Drives: 10 370z roadster Rep Power: 14	XPEL. Been on 2 years with no problems.

05-16-2013, 09:37 PM	#8 (permalink)
Nailzs Enthusiast Member Join Date: Aug 2012 Location: Florida Posts: 395 Drives: 13 370Z 7at Sp Tour Rep Power: 13	I use a coat of Klasse All-In-One acrylic wax and stay as far away from the rearend of traffic ahead of me as particle. Saves me at least $500.00 and chipped paint.