How do you remove the rear Hamburger NISSAN Emblem?

SR370z · 04-27-2013, 02:58 AM

Hey,

I need help on how to remove the rear hamburger nissan emblem. I have a new bumper and I would like to transfer that over to the new bumper. How would you go about removing it and placing it back onto the new bumper?

Wonka2581 · 04-27-2013, 03:03 AM

Use the search feature, in the DIY section.

SR370z · 04-27-2013, 03:06 AM

Quote:

Originally Posted by Wonka2581

Use the search feature, in the DIY section.

I have been using google and the search bar but nothing has showed up. All I see is removing the 370z emblem but nothing on how to remove the nissan hamburger emblem in the middle.

Wonka2581 · 04-27-2013, 03:33 AM

If it were me, I would use a pice of dental floss to remove it, and to reapply it I would use 3M VHB tape.

BeemaaZ · 04-27-2013, 04:35 AM

I used a hair dryer to heat up the adhesive and slowly and carefully pry the burger from the bumper

Driftomodachi · 04-27-2013, 04:56 AM

heat gun with a thermometer and fishing wire does a good job

Chuck33079 · 04-27-2013, 05:45 AM

I used fishing line after I let the car sit in the sun all afternoon. Some goo gone took care of the leftover adhesive.

SouthArk370Z · 04-27-2013, 08:10 AM

A heat gun and one of those hard plastic interior panel pry tools. Put something soft (eg, leather) at fulcrum point between paint and pry tool. Take your time. I haven't done it, but I watched the body shop when they changed my rear bumper cover.

GaleForce · 04-27-2013, 08:35 AM

Quote:

Originally Posted by Chuck33079

I used fishing line after I let the car sit in the sun all afternoon. Some goo gone took care of the leftover adhesive.

That's how I removed mine.

Baer383 · 04-27-2013, 09:36 AM

A plastic flexable bondo spreader works the best.
I do this at work all the time.

SR370z · 04-27-2013, 10:18 AM

Quote:

Originally Posted by Wonka2581

If it were me, I would use a pice of dental floss to remove it, and to reapply it I would use 3M VHB tape.

Where would you buy 3M VHM Tape? If I may ask

Baer383 · 04-27-2013, 10:22 AM

Quote:

Originally Posted by andyt421

Where would you buy 3M VHM Tape? If I may ask

Any 3m double sided tape will work good you should be able to pick it up at a auto parts store or hardware store.

SR370z · 04-27-2013, 10:41 AM

Quote:

Originally Posted by Baer383

Any 3m double sided tape will work good you should be able to pick it up at a auto parts store or hardware store.

Thanks for the quick reply I appreciate everyone's suggestions!

mfeinst · 04-27-2013, 11:54 AM

Autozone sells 3M super strength double sided tape. Stuff is crazy strong. Great for this sort of thing.

axmea? · 04-28-2013, 02:56 AM

Not sure if you've done this yet but this one works as well.

Let your car sit under the sun for 20 - 30 minutes. Spray slightly soapy water on the hamburger and completely cover with plastic garbage bag. The bags will cling to it. Ensure full coverage. Let it sit for 20 - 30 minutes. These will loosen the adhesive. With a fishing line (or with a dental floss if the adhesive tape has softened enough) run it and slice through the adhesive tape until you are completely through. Hope this helps.

04-27-2013, 02:58 AM	#1 (permalink)
SR370z Base Member Join Date: Oct 2012 Location: Utah Age: 34 Posts: 79 Drives: 12' Red 370z S 6MT Rep Power: 13	How do you remove the rear Hamburger NISSAN Emblem? Hey, I need help on how to remove the rear hamburger nissan emblem. I have a new bumper and I would like to transfer that over to the new bumper. How would you go about removing it and placing it back onto the new bumper?

04-27-2013, 03:03 AM	#2 (permalink)
Wonka2581 A True Z Fanatic Join Date: Nov 2012 Location: Chattanooga, TN Posts: 3,083 Drives: MY WIFE CRAZY.... Rep Power: 2611	Use the search feature, in the DIY section. __________________ "I have nothing to offer but blood, toil, tears and sweat""Winston Churchill"

04-27-2013, 03:33 AM	#4 (permalink)
Wonka2581 A True Z Fanatic Join Date: Nov 2012 Location: Chattanooga, TN Posts: 3,083 Drives: MY WIFE CRAZY.... Rep Power: 2611	If it were me, I would use a pice of dental floss to remove it, and to reapply it I would use 3M VHB tape. SR370z likes this. __________________ "I have nothing to offer but blood, toil, tears and sweat""Winston Churchill"

04-27-2013, 04:35 AM	#5 (permalink)
BeemaaZ A True Z Fanatic Join Date: Sep 2011 Location: Irvine, CA Posts: 2,594 Drives: 40thAE#472 Rep Power: 508	I used a hair dryer to heat up the adhesive and slowly and carefully pry the burger from the bumper TheGreatOne likes this. __________________ SoCal 40th Meet Old & New Mods Steering Lock RECALL**** Own 40th 370Z? Get the build # and the Manuf. date here Last edited by BeemaaZ; 04-29-2013 at 07:59 AM.

04-27-2013, 04:56 AM	#6 (permalink)
Driftomodachi Enthusiast Member Join Date: Mar 2013 Location: Cerritos, CA Posts: 482 Drives: 2010 40th Rep Power: 13	heat gun with a thermometer and fishing wire does a good job gurneyeagle and DYNAZOR like this.

04-27-2013, 05:45 AM	#7 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29538	I used fishing line after I let the car sit in the sun all afternoon. Some goo gone took care of the leftover adhesive. GaleForce likes this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

04-27-2013, 08:10 AM	#8 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324197	A heat gun and one of those hard plastic interior panel pry tools. Put something soft (eg, leather) at fulcrum point between paint and pry tool. Take your time. I haven't done it, but I watched the body shop when they changed my rear bumper cover. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

04-27-2013, 09:36 AM	#10 (permalink)
Baer383 A True Z Fanatic Join Date: Aug 2010 Location: Lawrenceville,Ga Posts: 4,293 Drives: My foot up your azz Rep Power: 30	A plastic flexable bondo spreader works the best. I do this at work all the time. SR370z likes this. __________________ 2013 ZL1 754 rwhp 747 rwtq

04-27-2013, 11:54 AM	#14 (permalink)
mfeinst Enthusiast Member Join Date: May 2012 Location: Greater Philly Area Posts: 272 Drives: Mercedes C43 AMG Rep Power: 13	Autozone sells 3M super strength double sided tape. Stuff is crazy strong. Great for this sort of thing. SR370z likes this. __________________ F.I. TT Kit -- GT2860RS [500rwhp/449ft-lbs @ 9psi][/B][/I] CAR SOLD...

04-28-2013, 02:56 AM	#15 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,235 Drives: WELL ZED PW 6MT Rep Power: 53241	Not sure if you've done this yet but this one works as well. Let your car sit under the sun for 20 - 30 minutes. Spray slightly soapy water on the hamburger and completely cover with plastic garbage bag. The bags will cling to it. Ensure full coverage. Let it sit for 20 - 30 minutes. These will loosen the adhesive. With a fishing line (or with a dental floss if the adhesive tape has softened enough) run it and slice through the adhesive tape until you are completely through. Hope this helps. __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete Last edited by axmea?; 05-02-2013 at 02:12 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] Rear OEM Nissan Hamburger emblem	DEpointfive0	Parts for sale (Private Classifieds)	8	09-15-2014 06:59 AM
WTB Nissan Hamburger emblem	DEpointfive0	Texas	2	06-04-2012 06:54 AM
WTB: Rear Nissan Hamburger Emblem	tbonesteak	Parts for sale (Private Classifieds)	0	09-26-2010 12:40 PM
WTB: Rear Nissan Hamburger Emblem	tbonesteak	Wanted	0	09-26-2010 12:40 PM