Another Tablet Cubby Thread (Nexus 7)

[Cbtech]

Originally Posted by Mr&Mrs

Ok, I got the center cubby and shroud out. I now have two issues, one being the factory Bose unit. I checked the DIY and removed the 4 bolts that hold it in place. I cant budge it though to pull it out. The DIY says you need a pry bar but not where to pry...I dont want to mess up anything.

There are (I believe) a total of 8 screws that hold the stereo in place. The head unit doesn't come out by its self the whole temp control assembly comes out with it.

[Mr&Mrs]

Thanks, I didnt know it cost that much! I may have to wait a bit before I get that. I found a few other options but they were more permanent (required cutting and splicing into the N7 itself. I want to be able to remove mine at any time.

Originally Posted by Bandit_Kaine

The iSimple media gateway will receive streaming audio from your tablet just fine. If you don't already have it though it'll cost you $300 to get the gateway + bluetooth module. Or you could get the gateway and use it's audio input (connect your tablet with the audio out cable to the input of the gateway).

Ok I will check it out tomorrow I was reading it on my phone while I was in the car. Thanks!

Originally Posted by Cbtech

There are (I believe) a total of 8 screws that hold the stereo in place. The head unit doesn't come out by its self the whole temp control assembly comes out with it.

[Cbtech]

Originally Posted by Cbtech

There are (I believe) a total of 8 screws that hold the stereo in place. The head unit doesn't come out by its self the whole temp control assembly comes out with it.

Also you ABSOLUTELY DO NOT need a pry bar to get the stereo out. once you release all the screws it practically falls out.