Gauge Cluster does not turn on!?

Mitco39 · 03-12-2013, 02:21 PM

Quote:

Originally Posted by SouthArk370Z

The green line: power comes from fuse #3 to the Defogger Relay coil. The BCM sinks to ground in this case. The BCM is not supplying power to the defogger coil.
The Ignition and Blower coils are powered from the BCM, but the Defogger coil is wired "bassackwards" and grounded through the BCM.

So if that is the case that has to mean I have power at Fuse 3, which means I have power at the relay and its working correctly. Its all going back to fuse 4, but I know for a fact I swapped in atleast 3 different spare fuses. I am going to check the continuity between each of the fuse posts and the terminals. Its looking like something had to have let go inside of the panel itself, or I am a dumbass and fuse 4 is good (or I have a ground on the circuit and it pops it as soon as I turn on the key). Which I know is not the case as I tried fuse 4 in different locations to make sure it was working.

Its a head scratcher...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Triple Gauge Cluster	ryan0	DIY Section (Do-It-Yourself)	94	11-29-2021 09:47 AM
Add Touring gauge cluster?	osbornsm	Exterior & Interior	4	06-28-2011 04:41 PM
WTB: Gauge Cluster	Push370zzz	Parts for sale (Private Classifieds)	4	10-14-2010 04:44 PM
WTB: Gauge Cluster	Push370zzz	Wanted	0	10-14-2010 03:28 PM
What happened to the tire pressure gauge and speedo in the middle gauge cluster?	rbratton	Nissan 370Z General Discussions	33	01-24-2009 10:28 PM