370z front lip with H&R Spring setup

Hatsuongmai · 02-20-2013, 11:21 PM

I'm currently have H&R spring with the stock sport rays rims. The H&R spring drop is pretty aggressive and I was wondering if I put on the front lip, it would be too low. If anyone who have this setup please kindly post up some pic. Thanks so much.

CC QUIK · 02-20-2013, 11:50 PM

Have the same set up. Love the drop but will scrape. I scrape now with the air deflector.Speed Bumps, Deep Driveways and Just Bad Roads.

axmea? · 02-22-2013, 12:32 AM

Not all lips go that low so it entirely depends on what you want to install.

Hatsuongmai · 02-22-2013, 02:58 AM

Axmea, if possible can you please show me some lip that actually cover a section of the bumper instead of just addon to the bottom of the bumper and start where the bottom bumper end? I saw a few out there but not sure which one cover a little area of the bumper and which one just add to the bottom of the bumper. Thanks

Big worm · 02-22-2013, 03:11 AM

I'm on H&rs and im installing my front lip tomorrow afternoon, Ill be sure to post a pic here

axmea? · 02-22-2013, 04:13 AM

Quote:

Originally Posted by Hatsuongmai

Axmea, if possible can you please show me some lip that actually cover a section of the bumper instead of just addon to the bottom of the bumper and start where the bottom bumper end? I saw a few out there but not sure which one cover a little area of the bumper and which one just add to the bottom of the bumper. Thanks

Here's a good start...

370ZBodyKit.com
vividracing.com
370ztuner.com

cheshirecat · 02-22-2013, 02:33 PM

Not all lips are the same- you will scrape with anything that's not very conservative.

Expect the lip to have a limited lifespan with that kind of drop unless you're extremely careful with your driving.

kenchan · 02-22-2013, 05:50 PM

my ings cf lip has more clearance than the stock deflector.

something to check out i guess.

quick note that the ings+ is unfinished so you will have to sand it and clearcoat (paint) before install.

ck my albums page for picts.

Unique_Z · 02-22-2013, 07:33 PM

OP, i'm running the same setup ; H&R springs and lip. I can say that i'm very low on 19s and a tad bit higher with 20s. here's some pictures for your references :

19''

20''

Big worm · 02-22-2013, 08:14 PM

yeah hey its me. i put on the same lip as Iwan72 above me, but i got the ebay knock-off and had it color matched. theres maybe an inch or 2 max clearance on flat ground, but im fully expecting it to scrape eventually. in the meantime id say its a huge improvement and it makes the car look aggressively low in the front.

gotchu99 · 02-22-2013, 08:15 PM

Quote:

Originally Posted by cheshirecat

Not all lips are the same- you will scrape with anything that's not very conservative.

Expect the lip to have a limited lifespan with that kind of drop unless you're extremely careful with your driving.

+1. I am on a conservative Eibach drop, less than an inch. My Stillen lip lasted about a year until last month when it split down the middle.

It was coming out of a parking lot I have scraped on many times before. The cold temperatures probably didn't help. On the bright side, I don't scrape and worry about it anymore.

Unique_Z · 02-22-2013, 08:26 PM

Oh BTW, i scrape everyday..

axmea? · 02-23-2013, 12:59 AM

Quote:

Originally Posted by Iwan72

Oh BTW, i scrape everyday..

I agree. Same here.

TheW3r3W0lf · 02-23-2013, 02:05 AM

I have H&Rs on my Nismo and for the most part it clears. Steep driveways and anything taller than 5" and it scrapes all the things.

KamiSpeed · 02-23-2013, 06:37 AM

depends on the lip

02-20-2013, 11:21 PM	#1 (permalink)
Hatsuongmai Base Member Join Date: Jan 2013 Location: Sj Posts: 113 Drives: Na Rep Power: 13	370z front lip with H&R Spring setup I'm currently have H&R spring with the stock sport rays rims. The H&R spring drop is pretty aggressive and I was wondering if I put on the front lip, it would be too low. If anyone who have this setup please kindly post up some pic. Thanks so much.

02-20-2013, 11:50 PM	#2 (permalink)
CC QUIK Base Member Join Date: Sep 2012 Location: Vegas Posts: 83 Drives: 2012 370Z Rep Power: 13	Have the same set up. Love the drop but will scrape. I scrape now with the air deflector.Speed Bumps, Deep Driveways and Just Bad Roads. rAiN likes this.

02-22-2013, 12:32 AM	#3 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,236 Drives: WELL ZED PW 6MT Rep Power: 53241	Not all lips go that low so it entirely depends on what you want to install. __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete

02-22-2013, 03:11 AM	#5 (permalink)
Big worm Base Member Join Date: May 2012 Location: Orlando, Florida Posts: 121 Drives: Blue dipped Z Rep Power: 13	I'm on H&rs and im installing my front lip tomorrow afternoon, Ill be sure to post a pic here NitrousZ34 likes this.

02-22-2013, 07:33 PM	#9 (permalink)
Unique_Z A True Z Fanatic Join Date: Dec 2010 Location: Brunei Posts: 1,515 Drives: 370Z, 180SX Rep Power: 18	OP, i'm running the same setup ; H&R springs and lip. I can say that i'm very low on 19s and a tad bit higher with 20s. here's some pictures for your references : 19'' 20'' __________________ My Z Build UniqueZ

02-22-2013, 02:58 AM	#4 (permalink)
Hatsuongmai Base Member Join Date: Jan 2013 Location: Sj Posts: 113 Drives: Na Rep Power: 13	Axmea, if possible can you please show me some lip that actually cover a section of the bumper instead of just addon to the bottom of the bumper and start where the bottom bumper end? I saw a few out there but not sure which one cover a little area of the bumper and which one just add to the bottom of the bumper. Thanks

02-22-2013, 02:33 PM	#7 (permalink)
cheshirecat A True Z Fanatic Join Date: Jan 2009 Location: Florida Posts: 1,428 Drives: N54 135i Rep Power: 293	Not all lips are the same- you will scrape with anything that's not very conservative. Expect the lip to have a limited lifespan with that kind of drop unless you're extremely careful with your driving.

02-22-2013, 05:50 PM	#8 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	my ings cf lip has more clearance than the stock deflector. something to check out i guess. quick note that the ings+ is unfinished so you will have to sand it and clearcoat (paint) before install. ck my albums page for picts.

02-22-2013, 08:26 PM	#12 (permalink)
Unique_Z A True Z Fanatic Join Date: Dec 2010 Location: Brunei Posts: 1,515 Drives: 370Z, 180SX Rep Power: 18	Oh BTW, i scrape everyday.. __________________ My Z Build UniqueZ

02-23-2013, 02:05 AM	#14 (permalink)
TheW3r3W0lf Base Member Join Date: Feb 2013 Location: Arizona Posts: 111 Drives: 2012 Z34 Nismo- SOLD Rep Power: 13	I have H&Rs on my Nismo and for the most part it clears. Steep driveways and anything taller than 5" and it scrapes all the things.

02-23-2013, 06:37 AM	#15 (permalink)
KamiSpeed A True Z Fanatic Join Date: Feb 2011 Location: Orlando, FL Posts: 5,888 Drives: 09 370z Rep Power: 26	depends on the lip __________________ KAMISPEED \| SHOP 370Z PERFORMANCE PARTS & MODS \| SUPPORT@KAMISPEED.COM KAMI SPEED REVIEWS \| FINANCE YOUR PARTS WITH US \| MILITARY & FIRST RESPONDERS PRE-ORDER DEPOSIT PROGRAM \| HKS MASTER SELLER

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom intake setup -- Stillen G3's, Velocity Stacks, Custom Front Crash Beam, pics	'10Anamoly	Intake/Exhaust	26	02-14-2015 11:59 AM
Anyone have a setup of 15mm spacers in front and 20 rear?	Jourelemode	Wheels & Tires	170	05-23-2014 06:42 PM
370z n g37 spring	x102x	Brakes & Suspension	1	03-27-2012 10:13 AM
Most reliable 370Z FI setup?	EuroZ	Forced Induction	23	11-12-2011 06:47 PM
Selling Eibach spring and OEM spring	spia	Parts for sale (Private Classifieds)	8	06-13-2009 09:18 AM