removed headlights for painting and turn signals dont work now

GaleForce · 02-20-2013, 08:08 PM

Page 51 states -

BCM performs the high flasher operation (fail-safe) if any bulb or harness of the turn signal lamp circuit is open.
Note:
Turn signal lamp blinks at normal speed when using hazard warning lamp.

Baer383 · 02-20-2013, 08:42 PM

It is the fuse in the IDPM it is not labeled properly mine blew and I changed it and it all good.

Mike · 02-20-2013, 08:58 PM

Quote:

Originally Posted by GaleForce

Mike, do you have the service manual?

Look in EXL page 51

If you don't have it I can send it to you of make screen shots.

I do have it. I'll look

Wonka2581 · 02-20-2013, 09:04 PM

Have you checked the connections? I mean its worth a shot... maybe you pullled a wire loose when you were unpluging from the harness I would check to see if any wires wiggle a little to much lol.......

Mike · 02-20-2013, 09:09 PM

I don't know which one is 52, but I pulled every 10A fuse and they are all fine in there.

GaleForce · 02-20-2013, 09:12 PM

Time to double check the wiring I guess.

Mike · 02-20-2013, 09:18 PM

new harnesses are less than 40 each, so I'm going to just replace them and see what happens. If that doesn't do it, I don't really need them anyway.

Wonka2581 · 02-20-2013, 09:33 PM

Quote:

Originally Posted by Mike

new harnesses are less than 40 each, so I'm going to just replace them and see what happens. If that doesn't do it, I don't really need them anyway.

Like a BOSS...... lmao

simota1 · 02-22-2013, 06:33 AM

Quote:

Originally Posted by Mike

new harnesses are less than 40 each, so I'm going to just replace them and see what happens. If that doesn't do it, I don't really need them anyway.

like wonka said... like a f*ckin boss man

looks great btw mike

Carbon_z · 02-22-2013, 01:04 PM

I had a similar issue it was a fuse. My issue was my passenger side headlight TURN SIGNAL and LOW BEAM were not working. I troubleshooted it by installing the defective light into the opposite side harness WHICH IT WORKED. So after taking the word of a mechanic saying the fuses where fine, I discovered that one fuse was burned out. The fuse on the right side, 4th from the bottom controls both the TURN SIGNAL and LOW BEAM. Once replaced, both my turn signal and low beam worked again

Hopefully that helps,

Mike · 02-22-2013, 02:24 PM

my low and high beams work fine, as do the two lower running bulbs, just not the turnsignals

Vnismo370z · 08-01-2013, 08:38 PM

Did your issue ever get fixed? How did you do it? I am running into the same issue...

02-20-2013, 08:08 PM	#16 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	Page 51 states - BCM performs the high flasher operation (fail-safe) if any bulb or harness of the turn signal lamp circuit is open. Note: Turn signal lamp blinks at normal speed when using hazard warning lamp. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

02-20-2013, 08:42 PM	#17 (permalink)
Baer383 A True Z Fanatic Join Date: Aug 2010 Location: Lawrenceville,Ga Posts: 4,293 Drives: My foot up your azz Rep Power: 30	It is the fuse in the IDPM it is not labeled properly mine blew and I changed it and it all good. __________________ 2013 ZL1 754 rwhp 747 rwtq

02-20-2013, 09:04 PM	#19 (permalink)
Wonka2581 A True Z Fanatic Join Date: Nov 2012 Location: Chattanooga, TN Posts: 3,083 Drives: MY WIFE CRAZY.... Rep Power: 2612	Have you checked the connections? I mean its worth a shot... maybe you pullled a wire loose when you were unpluging from the harness I would check to see if any wires wiggle a little to much lol....... __________________ "I have nothing to offer but blood, toil, tears and sweat""Winston Churchill"

02-20-2013, 09:09 PM	#20 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	I don't know which one is 52, but I pulled every 10A fuse and they are all fine in there. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

02-20-2013, 09:12 PM	#21 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	Time to double check the wiring I guess. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

02-20-2013, 09:18 PM	#22 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	new harnesses are less than 40 each, so I'm going to just replace them and see what happens. If that doesn't do it, I don't really need them anyway. simota1 and Wonka2581 like this. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

02-22-2013, 01:04 PM	#25 (permalink)
Carbon_z A True Z Fanatic Join Date: Sep 2009 Location: Atlanta, GA Posts: 1,694 Drives: Carbon Fiber 370z Rep Power: 19	I had a similar issue it was a fuse. My issue was my passenger side headlight TURN SIGNAL and LOW BEAM were not working. I troubleshooted it by installing the defective light into the opposite side harness WHICH IT WORKED. So after taking the word of a mechanic saying the fuses where fine, I discovered that one fuse was burned out. The fuse on the right side, 4th from the bottom controls both the TURN SIGNAL and LOW BEAM. Once replaced, both my turn signal and low beam worked again Hopefully that helps, __________________ Full Carbon Fiber Nissan 370z "400zTT" Fully Built 4.0L Twin Turbo 1300hp, 1100whp. Follow me on Instagram at http://www.instagram.com/carbonz.

02-22-2013, 02:24 PM	#26 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	my low and high beams work fine, as do the two lower running bulbs, just not the turnsignals __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

08-01-2013, 08:38 PM	#27 (permalink)
Vnismo370z Enthusiast Member Join Date: Nov 2011 Location: Tacoma, Wa Posts: 387 Drives: '15 370z PG Sport Rep Power: 14	Did your issue ever get fixed? How did you do it? I am running into the same issue... __________________ starting over

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Yellow Headlights, LED turn signals, black wrapped roof & valence	Big worm	Member's 370Z Gallery	7	07-14-2013 10:16 AM
Turn signals stay illuminated after startup	Kamari	Exterior & Interior	4	06-20-2012 02:29 PM
Turn signals	Trolling222	Exterior & Interior	16	06-15-2010 02:45 AM
LED's Turn signals!!!!	Puma0183	Exterior & Interior	8	07-16-2009 12:52 PM
370z Z turn signals	ItsOver9000!!	Exterior & Interior	8	01-20-2009 05:08 AM