Anyone have their Z vinyl wrapped?

TheW3r3W0lf · 02-23-2013, 02:10 AM

Mine has a few things wrapped, photos in my album : )

It's black, fairly heavy mil vinyl.

Bluebatmobile · 02-27-2013, 10:55 AM

Quote:

Originally Posted by Reaper42

I will be doing mine myself. Will be done by the end of March, Ill post pics then.

Cant wait for the pics!

B@t™

nismo-911 · 05-13-2016, 06:05 PM

Did anyone here wrap their car yet? If so, how much material do you need. Most rolls come in 5ft length rolls. How many yards or feet of it do i need? Thanks

K3shuyun · 05-13-2016, 09:00 PM

https://scontent-lga3-1.xx.fbcdn.net...14&oe=57D87AFF

heres a picture of mine wrapped. 55x5 is enough

outdoorfun · 09-09-2016, 01:23 AM

Quote:

Originally Posted by AlexRaymond19

If you do post some pics! I am thinking about doing it. I had a few places in mind, with quotes from 1200-5500... Very expensive in my opinion. What do you all think? I want to wrap my car because i have a lot of chips and scratches, especially on the hood and front bumper. It bugs the hell out of me everytime i look at it! So i figured this would be cheaper than getting a new paint job. If you have your car wrapped, or pictures of a freinds car (any make/model) please post up pics and approximate cost, as well as pros/cons you have personally run into. Thanks guys!

-Alex

You might want to visit Gatorwraps | Vehicle & Car Wraps | Signs & Banners tho, you can request for a quote plus they have a lot of vinyl wraps with lots of colors to choose from. Professionals there will be able to address all your concerns plus you can request for a quote. They have branches and installers located in just about every large city.

GetLucky370 · 03-27-2017, 11:24 PM

A standard full roll is good enough with some spare material incase of any mistakes or touch ups later down the road without having to buy another roll.

See below

DobeZ · 03-31-2017, 05:47 PM

Hey guys, new to the forum here, hope i'm doing this right. I just got done wrapping my Z in Satin Frozen Vanilla by 3M. I ordered 50 feet of material which comes on a roll 60" wide. I used almost all of it and was actually a little nervous towards the end that I might not have enough. If you are wanting to wrap your Z, I would say to order 60 feet of material just to be safe. I have more pics of my vinyl wrap process on my profile if you want to check it out. Feel free to ask questions.......

Cavallero · 03-31-2017, 08:14 PM

I was always wondering what happens after the vinyl is removed?!?

Any negatives for the existing paint and in particular the clear coat?

Any first hand experience?

DobeZ · 04-04-2017, 01:45 PM

Yes, vinyl wraps can be removed without hurting the paint. They also help protect the paint while on the vehicle. It is not as thick as a Paint Protection Film, but will help with some of the smaller rocks and debris.

Nixin · 04-04-2017, 02:46 PM

DobeZ your Z looks Dope!!! It really turned out very nice.

Jayhovah · 04-04-2017, 02:50 PM

Quote:

Originally Posted by DobeZ

Hey guys, new to the forum here, hope i'm doing this right. I just got done wrapping my Z in Satin Frozen Vanilla by 3M. I ordered 50 feet of material which comes on a roll 60" wide. I used almost all of it and was actually a little nervous towards the end that I might not have enough. If you are wanting to wrap your Z, I would say to order 60 feet of material just to be safe. I have more pics of my vinyl wrap process on my profile if you want to check it out. Feel free to ask questions.......

That came out great! Did you have any prior experience going into it? Difficulty on a scale 1-10? How many hours do you have into it?

Very impressive!

Nick M · 04-04-2017, 04:39 PM

liquid wrapped by an authorized installed of DYC products

roof, mirrors, wheels, exhaust tips, doors handles: Autoflex
body etc: Proline

Video:
https://youtu.be/0lGx7r8zeNI

Work done by Dynamic Auto Art in NY
Dynamic Auto Art - Fully Reversible Protective Coatings

wideglideleon · 04-04-2017, 06:33 PM

I have a few vehicles wrapped and just remember wrapping doesn't hide chips, they don't fill the holes. They will still show or worst case not stick there.

DobeZ · 04-05-2017, 06:57 PM

Quote:

Originally Posted by Jayhovah

That came out great! Did you have any prior experience going into it? Difficulty on a scale 1-10? How many hours do you have into it?

Very impressive!

Thanks for the complements, I appreciate it. I'm pretty pleased with the results myself. Now i'm trying to figure out what color to do my wheels. haha

As far as the wrap, I have some experience with vinyl wraps, but mostly just partial wraps like roofs and hoods. This was my first full wrap. It isn't that difficult of a car to wrap, but the cleaning and prep work take forever, especially when doing it all alone. I honestly don't know how many hours I have into it because I did it over multiple days. Hard to say on the difficulty because vinyl takes a lot of practice to figure out. So if you have done vinyl wraps before this car is probably super easy, if you haven't done it before i'm sure it would be a pain.

NRGz · 04-08-2017, 12:10 AM

Quote:

Originally Posted by DobeZ

Hey guys, new to the forum here, hope i'm doing this right. I just got done wrapping my Z in Satin Frozen Vanilla by 3M. I ordered 50 feet of material which comes on a roll 60" wide. I used almost all of it and was actually a little nervous towards the end that I might not have enough. If you are wanting to wrap your Z, I would say to order 60 feet of material just to be safe. I have more pics of my vinyl wrap process on my profile if you want to check it out. Feel free to ask questions.......

Painted front bumper? (In the middle) or wrapped? I feel like that area would be the hardest without cuts.
Also how was the rear diffuser(if you wrapped that as well).
Currently have some black wrap laying around and was thinking about ripping off some plastidip for the gloss wrap.

Also, any reason why you didnt wrap the handles?

Sent from my iPhone using Tapatalk

05-13-2016, 09:00 PM	#19 (permalink)
K3shuyun Base Member Join Date: Mar 2012 Location: MA! Posts: 12 Drives: 14 Nissan 370z BB Rep Power: 13	Mine is wrapped xD https://scontent-lga3-1.xx.fbcdn.net...14&oe=57D87AFF heres a picture of mine wrapped. 55x5 is enough

03-31-2017, 05:47 PM	#22 (permalink)
DobeZ Base Member Join Date: Mar 2017 Location: Utah Posts: 9 Drives: 09 Nissan 370Z Rep Power: 8	Hey guys, new to the forum here, hope i'm doing this right. I just got done wrapping my Z in Satin Frozen Vanilla by 3M. I ordered 50 feet of material which comes on a roll 60" wide. I used almost all of it and was actually a little nervous towards the end that I might not have enough. If you are wanting to wrap your Z, I would say to order 60 feet of material just to be safe. I have more pics of my vinyl wrap process on my profile if you want to check it out. Feel free to ask questions....... RustyM2001, Silly Rabbit, Kid_pistol131 and 2 others like this. Last edited by DobeZ; 03-31-2017 at 06:42 PM. Reason: adding pictures

04-04-2017, 02:46 PM	#25 (permalink)
Nixin A True Z Fanatic Join Date: Sep 2015 Location: GWN Posts: 3,488 Drives: Goodbye Z! Rep Power: 19833	DobeZ your Z looks Dope!!! It really turned out very nice. DobeZ likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
for those of you with a wrapped vinyl roof	edub370	Exterior & Interior	5	01-16-2013 06:26 PM
[FOR SALE] BRAND NEW: OEM trunk mat still wrapped up	Volk Z	Parts for sale (Private Classifieds)	4	12-15-2012 05:47 PM
Vinyl wrapped the roof and rear defuser	Nixlimited	Exterior & Interior	34	04-10-2012 12:30 AM
CF Wrapped a few pieces...	Fatalsports	Exterior & Interior	30	10-25-2011 06:46 PM

02-23-2013, 02:10 AM	#16 (permalink)
TheW3r3W0lf Base Member Join Date: Feb 2013 Location: Arizona Posts: 111 Drives: 2012 Z34 Nismo- SOLD Rep Power: 12	Mine has a few things wrapped, photos in my album : ) It's black, fairly heavy mil vinyl.

05-13-2016, 06:05 PM	#18 (permalink)
nismo-911 Base Member Join Date: Sep 2015 Location: Hollywood Florida Posts: 63 Drives: 12 370z White Auto Rep Power: 10	Did anyone here wrap their car yet? If so, how much material do you need. Most rolls come in 5ft length rolls. How many yards or feet of it do i need? Thanks

03-31-2017, 08:14 PM	#23 (permalink)
Cavallero Base Member Join Date: Feb 2017 Location: Sydney, Australia Posts: 18 Drives: 2017 370Z Rep Power: 8	I was always wondering what happens after the vinyl is removed?!? Any negatives for the existing paint and in particular the clear coat? Any first hand experience?

04-04-2017, 01:45 PM	#24 (permalink)
DobeZ Base Member Join Date: Mar 2017 Location: Utah Posts: 9 Drives: 09 Nissan 370Z Rep Power: 8	Yes, vinyl wraps can be removed without hurting the paint. They also help protect the paint while on the vehicle. It is not as thick as a Paint Protection Film, but will help with some of the smaller rocks and debris.

04-04-2017, 06:33 PM	#28 (permalink)
wideglideleon Track Member Join Date: Apr 2015 Location: Tucson AZ Posts: 569 Drives: SC 09 370Z LG 7AT Rep Power: 64085	I have a few vehicles wrapped and just remember wrapping doesn't hide chips, they don't fill the holes. They will still show or worst case not stick there.