Nissan 370Z Forum  

Paint feels coarse/thinner clear coat?

I just waxed my car today for the first time and I've noticed that on my monterey blue Z on the passenger side, the entire top half of the car

Go Back   Nissan 370Z Forum > Nissan 370Z Tech Area > Exterior & Interior


Reply
 
LinkBack Thread Tools Display Modes
Old 07-15-2009, 08:14 PM   #1 (permalink)
Enthusiast Member
 
Join Date: Jun 2009
Location: Reston, VA
Posts: 390
Drives: 13' E92 M3
Rep Power: 16
spitfire9200 is on a distinguished road
Default Paint feels coarse/thinner clear coat?

I just waxed my car today for the first time and I've noticed that on my monterey blue Z on the passenger side, the entire top half of the car feels rougher than the bottom. Almost like the clear coat is way thinner on the top half. It starts at the top half of the bumper and goes from the fender to the rear quarter panel. There is also a fingerprint... yes a FINGERPRINT in the clear coat on my fender. Could this car have been involved in a shipping accident or a fender bender in transportation/on the lot resulting in a shop trying to cover it up by re-painting?.. or could the fingerprint have been during the primary painting at the nissan plant?

My question is, does anyone else notice that on certain parts of their Z the paint isn't as smooth as it should be? After waxing (with every car i've owned) the entire car should feel silky smooth.... but not my Z. The top half feels coarse.... there definitely isn't enough clear coat.

My dealer should cover this right? Honestly I'm starting to feel this car is a lemon, because the paint on my bumper is peeling off on the corner of where the bumper meets the fender as well.

What do I do now? Help! Any insight, experience or advice is greatly appreciated.

Ryan
spitfire9200 is offline   Reply With Quote
Old 07-15-2009, 08:24 PM   #2 (permalink)
GMZ
Enthusiast Member
 
GMZ's Avatar
 
Join Date: Jun 2009
Location: Virginia Beach
Posts: 304
Drives: 07 V8 4Runner 4x4
Rep Power: 16
GMZ is on a distinguished road
Default

Your clear coat is most likely fine. Get a clay bar kit from Pep Boys and clay the whole car, that will probably fix this problem. Its bonded contaminants like tar, sap, and rail dust that make it feel that way. And when you pick it up from the dealer they (and you it seems) just wax right over it. If you clay it and it doesnt feel like glass after than Id take it in.

Edit: The top half feels coarse because theyre horizontal surfaces and the contaminants stick and bond to those easier. Id need pics of the bumper to understand better what exactly it looks like.

Last edited by GMZ; 07-15-2009 at 08:26 PM.
GMZ is offline   Reply With Quote
Old 07-15-2009, 08:30 PM   #3 (permalink)
NOT A CURRENT VENDOR
 
SpawnAeroJohn's Avatar
 
Join Date: Jun 2009
Location: Chicago
Posts: 609
Drives: you
Rep Power: 17
SpawnAeroJohn will become famous soon enough
Default

If you think it was in an accident compare the panels (left and right) They will usually have a texture because a paint job by a shop is either better or worse than stock. Usually better.

Another thing is check the corners and edges. If it looks faded, dull, or has little dimples (basically a different texture) that aren’t anywhere else then it has been repainted. Most shops don’t buff edges and corners so that’s how you can tell.
SpawnAeroJohn is offline   Reply With Quote
Old 07-15-2009, 08:43 PM   #4 (permalink)
Enthusiast Member
 
Join Date: Jun 2009
Location: Reston, VA
Posts: 390
Drives: 13' E92 M3
Rep Power: 16
spitfire9200 is on a distinguished road
Default

Quote:
Originally Posted by GMZ View Post
Your clear coat is most likely fine. Get a clay bar kit from Pep Boys and clay the whole car, that will probably fix this problem. Its bonded contaminants like tar, sap, and rail dust that make it feel that way. And when you pick it up from the dealer they (and you it seems) just wax right over it. If you clay it and it doesnt feel like glass after than Id take it in.

Edit: The top half feels coarse because theyre horizontal surfaces and the contaminants stick and bond to those easier. Id need pics of the bumper to understand better what exactly it looks like.
the flat part of the bumper right before it meets the fender.
spitfire9200 is offline   Reply With Quote
Old 07-15-2009, 08:44 PM   #5 (permalink)
Enthusiast Member
 
Join Date: Jun 2009
Location: Reston, VA
Posts: 390
Drives: 13' E92 M3
Rep Power: 16
spitfire9200 is on a distinguished road
Default

Quote:
Originally Posted by SpawnAeroJohn View Post
If you think it was in an accident compare the panels (left and right) They will usually have a texture because a paint job by a shop is either better or worse than stock. Usually better.

Another thing is check the corners and edges. If it looks faded, dull, or has little dimples (basically a different texture) that aren’t anywhere else then it has been repainted. Most shops don’t buff edges and corners so that’s how you can tell.
They all seeem the same and I also didn't notice any over spray.

if it was contaminants, why would only the right side feel this way and not the left? The fingerprint throws me off too.
spitfire9200 is offline   Reply With Quote
Old 07-15-2009, 08:45 PM   #6 (permalink)
37Z
Enthusiast Member
 
37Z's Avatar
 
Join Date: Jun 2009
Location: Florida
Posts: 476
Drives: 370Z MB 6M -sold
Rep Power: 263
37Z has a reputation beyond repute37Z has a reputation beyond repute37Z has a reputation beyond repute37Z has a reputation beyond repute37Z has a reputation beyond repute37Z has a reputation beyond repute37Z has a reputation beyond repute37Z has a reputation beyond repute37Z has a reputation beyond repute37Z has a reputation beyond repute37Z has a reputation beyond repute
Default Repaint Checks

Quote:
Originally Posted by SpawnAeroJohn View Post
If you think it was in an accident compare the panels (left and right) They will usually have a texture because a paint job by a shop is either better or worse than stock. Usually better.

Another thing is check the corners and edges. If it looks faded, dull, or has little dimples (basically a different texture) that aren’t anywhere else then it has been repainted. Most shops don’t buff edges and corners so that’s how you can tell.
Most body shops don't buff-out the edges because the paint can be easily burn through! Unless one pays $$$$, the Nissan factory and most other car manufatures paint jobs looks uneven IMHO.
37Z is offline   Reply With Quote
Old 07-15-2009, 08:51 PM   #7 (permalink)
NOT A CURRENT VENDOR
 
SpawnAeroJohn's Avatar
 
Join Date: Jun 2009
Location: Chicago
Posts: 609
Drives: you
Rep Power: 17
SpawnAeroJohn will become famous soon enough
Default

You said the fender right? Look under the hood. The bolts that hold the fender to the frame are also painted. If they are scratched or unpainted then the fender was removed for some reason. Possibly refinishing and maybe they did that good of a job.
SpawnAeroJohn is offline   Reply With Quote
Old 07-16-2009, 12:22 AM   #8 (permalink)
Enthusiast Member
 
Join Date: Jun 2009
Location: Reston, VA
Posts: 390
Drives: 13' E92 M3
Rep Power: 16
spitfire9200 is on a distinguished road
Default

Quote:
Originally Posted by SpawnAeroJohn View Post
You said the fender right? Look under the hood. The bolts that hold the fender to the frame are also painted. If they are scratched or unpainted then the fender was removed for some reason. Possibly refinishing and maybe they did that good of a job.
No scratches or missing paint; I just checked... hmmm...

also, no rough edges as body shops tend to leave after painting body panels. I was thinking too, if it was re-painted, the shop would paint the entire door, not just the top half..

this is just frustrating, lol
spitfire9200 is offline   Reply With Quote
Old 07-16-2009, 12:24 AM   #9 (permalink)
NOT A CURRENT VENDOR
 
SpawnAeroJohn's Avatar
 
Join Date: Jun 2009
Location: Chicago
Posts: 609
Drives: you
Rep Power: 17
SpawnAeroJohn will become famous soon enough
Default

Overspray from something or other? Look suuuuuper close. You might see the individual particles.
SpawnAeroJohn is offline   Reply With Quote
Old 07-16-2009, 12:52 AM   #10 (permalink)
Enthusiast Member
 
Join Date: Jun 2009
Location: Reston, VA
Posts: 390
Drives: 13' E92 M3
Rep Power: 16
spitfire9200 is on a distinguished road
Default

Quote:
Originally Posted by SpawnAeroJohn View Post
Overspray from something or other? Look suuuuuper close. You might see the individual particles.
The paint color matches and I stared at it for about 5 min.from about 4 inches and can't seem to see any overspray particles. It feels like coarse and kind of gritty. The gritty-ness honestly feels like a really coarse dust. If I rub it with a microfiber in one spot for a good minute it sort of smooths out, but still feels rougher than the rest of the car. I'm starting to think it may be what gmz said earlier about contaminants in the paint and to just clay it....but I'm still paranoid. The fingerprint is still unexplained though.

I'm also still curious to see if anyone else has this issue with their paint
spitfire9200 is offline   Reply With Quote
Old 07-16-2009, 12:59 AM   #11 (permalink)
NOT A CURRENT VENDOR
 
SpawnAeroJohn's Avatar
 
Join Date: Jun 2009
Location: Chicago
Posts: 609
Drives: you
Rep Power: 17
SpawnAeroJohn will become famous soon enough
Default

Id suggest taking it to a good body shop to see what they say.
SpawnAeroJohn is offline   Reply With Quote
Old 07-16-2009, 12:23 PM   #12 (permalink)
Enthusiast Member
 
Join Date: Jun 2009
Location: Reston, VA
Posts: 390
Drives: 13' E92 M3
Rep Power: 16
spitfire9200 is on a distinguished road
Default

Quote:
Originally Posted by SpawnAeroJohn View Post
Id suggest taking it to a good body shop to see what they say.
yea I plan on it eventually. I'm going to see one of my friends who does body work next week, i'll ask him.
spitfire9200 is offline   Reply With Quote
Old 07-16-2009, 12:38 PM   #13 (permalink)
GMZ
Enthusiast Member
 
GMZ's Avatar
 
Join Date: Jun 2009
Location: Virginia Beach
Posts: 304
Drives: 07 V8 4Runner 4x4
Rep Power: 16
GMZ is on a distinguished road
Default

Quote:
Originally Posted by spitfire9200 View Post
The paint color matches and I stared at it for about 5 min.from about 4 inches and can't seem to see any overspray particles. It feels like coarse and kind of gritty. The gritty-ness honestly feels like a really coarse dust. If I rub it with a microfiber in one spot for a good minute it sort of smooths out, but still feels rougher than the rest of the car. I'm starting to think it may be what gmz said earlier about contaminants in the paint and to just clay it....but I'm still paranoid. The fingerprint is still unexplained though.

I'm also still curious to see if anyone else has this issue with their paint
From how you describe the bumper that sounds fishy. But for the feel of the paint there could be many reasons. Maybe it was parked with that side toward something that put off dust? If that side was facing say train tracks you could have some rail dust. Or maybe next to something else of that type in the port. Id def get the bumper checked out, but while youre waiting do a good claybar treatment and see what that nets you.
GMZ is offline   Reply With Quote
Old 07-16-2009, 12:42 PM   #14 (permalink)
Track Member
 
Join Date: May 2009
Location: Ohio
Posts: 699
Drives: 370Z-AT7 Tour+Sport
Rep Power: 375
ZKindaGuy has a reputation beyond reputeZKindaGuy has a reputation beyond reputeZKindaGuy has a reputation beyond reputeZKindaGuy has a reputation beyond reputeZKindaGuy has a reputation beyond reputeZKindaGuy has a reputation beyond reputeZKindaGuy has a reputation beyond reputeZKindaGuy has a reputation beyond reputeZKindaGuy has a reputation beyond reputeZKindaGuy has a reputation beyond reputeZKindaGuy has a reputation beyond repute
Default

Quote:
Originally Posted by spitfire9200 View Post
I just waxed my car today for the first time and I've noticed that on my monterey blue Z on the passenger side, the entire top half of the car feels rougher than the bottom. Almost like the clear coat is way thinner on the top half. It starts at the top half of the bumper and goes from the fender to the rear quarter panel. There is also a fingerprint... yes a FINGERPRINT in the clear coat on my fender. Could this car have been involved in a shipping accident or a fender bender in transportation/on the lot resulting in a shop trying to cover it up by re-painting?.. or could the fingerprint have been during the primary painting at the nissan plant?

My question is, does anyone else notice that on certain parts of their Z the paint isn't as smooth as it should be? After waxing (with every car i've owned) the entire car should feel silky smooth.... but not my Z. The top half feels coarse.... there definitely isn't enough clear coat.

My dealer should cover this right? Honestly I'm starting to feel this car is a lemon, because the paint on my bumper is peeling off on the corner of where the bumper meets the fender as well.

What do I do now? Help! Any insight, experience or advice is greatly appreciated.

Ryan

First off as someone suggested get a claybar and go over the entire car with it to remove any contaminants such as road dust, tree sap and a host of other crap that fills the air that can settle into the car's surface.

Second - after that then get a very fine clear-coat safe polish and polish the entire painted surface. And spend a little extra time and light pressure on teh finger print area.

Third - Seal the surface with a coat or two of a good carnubba wax.

Forth - Do not always jump to the conclusion that something was being hidden, covered up or a conspiracy to defraud by the manufacturer or the dealer. It is absolutely normal for many of the cars that are transported by train or by portable parking lots to be "repaired" after transport before they are placed onto teh dealer lot for public display and consumption. That doesn't mean the dealer is trying to cover up an accident because those kinds of things aren't really accidentis unless they cause damage above and beyond the normal wear and tear caused by transporting. from manufacturer to the dealer.
ZKindaGuy is offline   Reply With Quote
Old 07-16-2009, 01:29 PM   #15 (permalink)
A True Z Fanatic
 
rreign's Avatar
 
Join Date: Apr 2009
Location: South Carolina
Age: 40
Posts: 2,341
Drives: 03 Evo 8
Rep Power: 709
rreign has a reputation beyond reputerreign has a reputation beyond reputerreign has a reputation beyond reputerreign has a reputation beyond reputerreign has a reputation beyond reputerreign has a reputation beyond reputerreign has a reputation beyond reputerreign has a reputation beyond reputerreign has a reputation beyond reputerreign has a reputation beyond reputerreign has a reputation beyond repute
Default

Hey bro, something to think about with the fingerprint is that any real company/paint shop etc. their painters take very good precautions for their own health/safety. So they will wear latex/nitrile gloves, mask ect. Chop shop painters for the most part will only wear the bare minimum. That being said, it's possible that during a repainting or a touch up from peeling or whatever that your car was at some random shop for, the painter wasn't wearing gloves. With gloves on, you wouldn't have any real distinctive fingerprint.

Just my 2 cents.....

Ohhh, I feel a conspiracy coming on, lol.
rreign is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
What do people think of Clear Bra Paint Protection? rbratton Nissan 370Z General Discussions 304 01-18-2013 04:31 PM
Am I the only one with the bad clear coat? ENT-Z Nissan 370Z General Discussions 17 05-24-2012 09:29 AM
Scratches in paint under clear coat blackbird Exterior & Interior 23 08-07-2009 09:24 PM
Powder Coat Door Handles? eXo5 Exterior & Interior 6 05-13-2009 09:29 AM
370Z Commercial - Nothing Else Feels Like a Z 12.20.08 AK370Z Nissan 370Z Photos / Spyshots / Video / Media Gallery 14 12-23-2008 11:55 AM


All times are GMT -5. The time now is 11:21 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2