Paint feels coarse/thinner clear coat?

m4a1mustang · 07-16-2009, 01:31 PM

Do you want me to take a look at it?

I'm betting it just needs to be clayed. The finger print very well could have been yours... Touch the surface and your oils stick to it... let the car bake in the sun... voila.

I'd recommend a wash, clay, light polish, and a sealent.

chubbs · 07-16-2009, 03:57 PM

If you have self-healing paint the fingerprint might just melt and disappear before your very eyes

Maybe it's the last unselfhealed part of an entire hand or complete body print

Alexus · 07-18-2009, 04:25 PM

I'm surprised no one here has mentioned orange peel, but I'm at a loss to remember if it has a particular tactile feel to it.

NXTAZEE · 07-18-2009, 04:34 PM

Quote:

Originally Posted by Alexus

I'm surprised no one here has mentioned orange peel, but I'm at a loss to remember if it has a particular tactile feel to it.

Orange peel has no coarse or gritty feel to it. It may look bad, but you cant feel it. The op should clay the surface to see if that works, if not it could be a bad re-spray.

Alexus · 07-18-2009, 04:39 PM

Quote:

Originally Posted by NXTAZEE

Orange peel has no coarse or gritty feel to it. It may look bad, but you cant feel it. The op should clay the surface to see if that works, if not it could be a bad re-spray.

Exactly what I thought.

spitfire9200 · 07-18-2009, 06:30 PM

Quote:

Originally Posted by m4a1mustang

Do you want me to take a look at it?

I'm betting it just needs to be clayed. The finger print very well could have been yours... Touch the surface and your oils stick to it... let the car bake in the sun... voila.

I'd recommend a wash, clay, light polish, and a sealent.

Quote:

Originally Posted by chubbs

If you have self-healing paint the fingerprint might just melt and disappear before your very eyes

Maybe it's the last unselfhealed part of an entire hand or complete body print

Where are you located? If you could yea that'd be great. I was going to try a clay as soon as I get some time off work. The fingerprint is straight up in the clearcoat... as in you run your nail on it and it has the same texture as like bird crap stuck to your car. Basically you can pick at it and it won't come off.

m4a1mustang · 07-18-2009, 06:35 PM

Quote:

Originally Posted by spitfire9200

Where are you located? If you could yea that'd be great. I was going to try a clay as soon as I get some time off work. The fingerprint is straight up in the clearcoat... as in you run your nail on it and it has the same texture as like bird crap stuck to your car. Basically you can pick at it and it won't come off.

I'm in Fairfax.

Sounds like the oils etched into the clear coat. You probably could smooth it out with some polishing.

Keep an eye on the Mid-Atlantic forum. I'm going to try to organize a get together in the next week or so.

SpawnAeroJohn · 07-18-2009, 06:38 PM

As far as I can tell by reading through all this. Worst comes to worse. A shop would wetsand it with 3000 grit and buff it with a light rubbing compound. Or not wetsand at all and buff with a medium cutting compound. Id ask to have it buffed before anything.

But like all is saying. CLAY BAR! Its like 20 bucks.

spitfire9200 · 07-18-2009, 07:41 PM

Quote:

Originally Posted by m4a1mustang

I'm in Fairfax.

Sounds like the oils etched into the clear coat. You probably could smooth it out with some polishing.

Keep an eye on the Mid-Atlantic forum. I'm going to try to organize a get together in the next week or so.

Quote:

Originally Posted by SpawnAeroJohn

As far as I can tell by reading through all this. Worst comes to worse. A shop would wetsand it with 3000 grit and buff it with a light rubbing compound. Or not wetsand at all and buff with a medium cutting compound. Id ask to have it buffed before anything.

But like all is saying. CLAY BAR! Its like 20 bucks.

lol i'm going to buy a clay bar as soon as I get some time off from work. Probably tomorrow and try it on monday.

Appreciate everyones responses btw. Hey m4a1mustang, if you could take a look at the fingerprint/paint issue I have sometime that would be straight as well. I'm going to go to my buddy's shop sometime next week, but if you could check it out before that i'd really appreciate it. PM me your # and i'll text u.

I'm thinking the dealer should be the one to wetsand/polish that fingerprint for me. Seems wrong I would have to pay a shop to do it when the car doesn't even have plates yet. Also, if the clay doesn't solve the issue, what steps should I take to get it resolved?

I forgot to mention the paint also peeled off a teeny bit where my bumper meets my fender. It's super small but the fact that the paint actually PEELED off this early pissed me off as well. The dealer said they were waiting for a response from their district manager to approve the warranty coverage. The Nissan body shop said it is most likely covered, but i've yet to hear back from them. I guess i'll go back and bitch some more.

sigh. I hate being that guy, but I just paid for a new car and I don't think all these issues are justifiable this early on and everything should be covered.

thoughts?

Balzdeep · 07-18-2009, 07:45 PM

My 07 had dull feeling paint (white) back around the hatch.

spitfire9200 · 07-18-2009, 07:53 PM

Quote:

Originally Posted by Balzdeep

My 07 had dull feeling paint (white) back around the hatch.

did you ever get it resolved? Was it a new car or a used one?

spitfire9200 · 07-18-2009, 11:35 PM

man I really hate the paint on this car.

chubbs · 07-19-2009, 12:47 AM

Quote:

Originally Posted by spitfire9200

...I forgot to mention the paint also peeled off a teeny bit where my bumper meets my fender. It's super small but the fact that the paint actually PEELED off this early pissed me off as well. The dealer said they were waiting for a response from their district manager to approve the warranty coverage. The Nissan body shop said it is most likely covered, but i've yet to hear back from them. I guess i'll go back and bitch some more.

sigh. I hate being that guy, but I just paid for a new car and I don't think all these issues are justifiable this early on and everything should be covered.

thoughts?

Seriously this time, I'll tell you my thoughts - don't feel anything other than indignation - you're absolutely right to be dissatisfied and your dealer/Nissan should be 100% apologetic and 100% helpful.

You should not pay one penny for either clay bar or a body shop - Paintwork is covered under warranty. Take good quality close-up pics before it's done, just in case and don't be satisfied with anything other than a 100% perfect repair. My motto is, BE FUSSY AND THEY WON'T MESS WITH YOU.

Nissan water-based paint has never had a good reputation - it's very thin & chips easily - don't accept anything other than complete satisfaction. I'm sure we're all on your side.

spitfire9200 · 07-19-2009, 01:25 AM

Quote:

Originally Posted by chubbs

Seriously this time, I'll tell you my thoughts - don't feel anything other than indignation - you're absolutely right to be dissatisfied and your dealer/Nissan should be 100% apologetic and 100% helpful.

You should not pay one penny for either clay bar or a body shop - Paintwork is covered under warranty. Take good quality close-up pics before it's done, just in case and don't be satisfied with anything other than a 100% perfect repair. My motto is, BE FUSSY AND THEY WON'T MESS WITH YOU.

Nissan water-based paint has never had a good reputation - it's very thin & chips easily - don't accept anything other than complete satisfaction. I'm sure we're all on your side.

thanks man. I'm heading to the dealer monday to bitch. I'm sick of this. I have chips, bird sh*t eating through my clear coat, rough feeling/uneven paint, and paint peeling off my bumper and the car doesn't even have plates yet. It's absolutely unacceptable

07-16-2009, 01:31 PM	#16 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6962	Do you want me to take a look at it? I'm betting it just needs to be clayed. The finger print very well could have been yours... Touch the surface and your oils stick to it... let the car bake in the sun... voila. I'd recommend a wash, clay, light polish, and a sealent. __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook! Last edited by m4a1mustang; 07-16-2009 at 02:02 PM.

07-16-2009, 03:57 PM	#17 (permalink)
chubbs A True Z Fanatic Join Date: Jan 2009 Location: Zeeland Posts: 1,046 Drives: 2016 370z Auto-Grey Rep Power: 7586	If you have self-healing paint the fingerprint might just melt and disappear before your very eyes Maybe it's the last unselfhealed part of an entire hand or complete body print __________________ . '03 Grey >>> '06 Black >>>'10 Silver >>> '16 Grey ^

07-18-2009, 04:25 PM	#18 (permalink)
Alexus Base Member Join Date: Dec 2008 Location: Montreal, QC Posts: 178 Drives: The Beast Rep Power: 16	I'm surprised no one here has mentioned orange peel, but I'm at a loss to remember if it has a particular tactile feel to it. __________________ "The object of war is not to die for your country but to make the other bastard die for his." -General George S. Patton Jr., 1885-1945

07-18-2009, 07:45 PM	#25 (permalink)
Balzdeep Base Member Join Date: Jul 2009 Location: SW Mizzou Posts: 17 Drives: Many Rep Power: 16	My 07 had dull feeling paint (white) back around the hatch. __________________ Current:08 CSRT4 ED downpipe, RT Clamp, AGP wg, MS1, S1 injectors, PTP inlet pipe, etc. *Dyno 7/11/09 - 350/353 fwhp

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What do people think of Clear Bra Paint Protection?	rbratton	Nissan 370Z General Discussions	304	01-18-2013 04:31 PM
Am I the only one with the bad clear coat?	ENT-Z	Nissan 370Z General Discussions	17	05-24-2012 09:29 AM
Scratches in paint under clear coat	blackbird	Exterior & Interior	23	08-07-2009 09:24 PM
Powder Coat Door Handles?	eXo5	Exterior & Interior	6	05-13-2009 09:29 AM
370Z Commercial - Nothing Else Feels Like a Z 12.20.08	AK370Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	14	12-23-2008 11:55 AM

07-18-2009, 06:38 PM	#23 (permalink)
SpawnAeroJohn NOT A CURRENT VENDOR Join Date: Jun 2009 Location: Chicago Posts: 609 Drives: you Rep Power: 17	As far as I can tell by reading through all this. Worst comes to worse. A shop would wetsand it with 3000 grit and buff it with a light rubbing compound. Or not wetsand at all and buff with a medium cutting compound. Id ask to have it buffed before anything. But like all is saying. CLAY BAR! Its like 20 bucks.

07-18-2009, 11:35 PM	#27 (permalink)
spitfire9200 Enthusiast Member Join Date: Jun 2009 Location: Reston, VA Posts: 390 Drives: 13' E92 M3 Rep Power: 16	man I really hate the paint on this car.