Any ideas to eliminate squeak in hatch ????

cave vulture · 07-15-2009, 01:22 AM

The black plastic moulding where the hatch rests squeaks when you go over a bump. I confirmed this by pushing on the moulding and recognizing the annoying sound. Any suggestions on a fix, or is the dealer my only option?

SpawnAeroJohn · 07-15-2009, 01:24 AM

They are coated in a special grease to keep it from squeeking. Any chance you really really really cleaned your car and wiped all those down with a degreasing agent? That might have done it. But I doubt it unless you really went over it well because that grease is tough to just wipe away. It also keeps the rubber from cracking in real cold weather. You see older cars with cracked mouldings because the grease over the corse of years and years fades. I'm not sure I might be wrong. It then again might be one of those things you cant get rid of kind of like the natural sound of any other part of your Z.

cave vulture · 07-15-2009, 01:29 AM

I havn't done any cleaning. Just to clarify, the noise is not coming from the hatch itself, but the hard plastic lip that the hatch rests on when closed.

chubbs · 07-15-2009, 01:54 AM

You have 2 options - dismantle it yourself and either use grease or a bit of packing material, whichever seems appropriate, or take it to the dealer (it will be covered under warranty). Personally, if I were to take it to the dealer I'd take photos first, in case they scratch or damage any paint or plastic trim - they do things like that.

cave vulture · 07-15-2009, 02:50 AM

I was thinking of squirting some "Locktite" in there to see if it might help?

SpawnAeroJohn · 07-15-2009, 09:16 AM

Before doing anything Id study it a little more and then make a decesion if you or the dealer should handle the problem. If you try something then take it to the dealer and they brake something they can blame it on you.

cave vulture · 07-15-2009, 12:23 PM

I understand, and what I will probably do is stop by the dealer to hear what he suggests.

LiquidZ · 07-15-2009, 01:01 PM

I have a rattle from my hatch. I just have to close the hatch harder I guess.

07-15-2009, 01:22 AM	#1 (permalink)
cave vulture Enthusiast Member Join Date: May 2009 Location: pennsylvania Posts: 427 Drives: 370z tour,sport,auto Rep Power: 16	Any ideas to eliminate squeak in hatch ???? The black plastic moulding where the hatch rests squeaks when you go over a bump. I confirmed this by pushing on the moulding and recognizing the annoying sound. Any suggestions on a fix, or is the dealer my only option?

07-15-2009, 01:54 AM	#4 (permalink)
chubbs A True Z Fanatic Join Date: Jan 2009 Location: Zeeland Posts: 1,046 Drives: 2016 370z Auto-Grey Rep Power: 7586	You have 2 options - dismantle it yourself and either use grease or a bit of packing material, whichever seems appropriate, or take it to the dealer (it will be covered under warranty). Personally, if I were to take it to the dealer I'd take photos first, in case they scratch or damage any paint or plastic trim - they do things like that. __________________ . '03 Grey >>> '06 Black >>>'10 Silver >>> '16 Grey ^

07-15-2009, 01:01 PM	#8 (permalink)
LiquidZ A True Z Fanatic Join Date: Nov 2008 Location: Columbus, OH Posts: 1,940 Drives: Mag. Black 2009 370Z Rep Power: 704	I have a rattle from my hatch. I just have to close the hatch harder I guess. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Interior noise/squeak/chirp	m4a1mustang	Exterior & Interior	18	01-13-2019 03:41 PM
Am I missing something (in the hatch?). Pic.	Scribe	Nissan 370Z General Discussions	17	12-12-2009 08:46 PM
ecu tune eliminate CEL?	genki370z	Intake/Exhaust	1	07-02-2009 08:29 PM
Squeak from the back on turns/acceleration	grahfz	Exterior & Interior	0	05-05-2009 08:30 PM
370z Hatch Struts!	SocalBurt	Exterior & Interior	18	01-30-2009 06:25 PM

07-15-2009, 01:24 AM	#2 (permalink)
SpawnAeroJohn NOT A CURRENT VENDOR Join Date: Jun 2009 Location: Chicago Posts: 609 Drives: you Rep Power: 17	They are coated in a special grease to keep it from squeeking. Any chance you really really really cleaned your car and wiped all those down with a degreasing agent? That might have done it. But I doubt it unless you really went over it well because that grease is tough to just wipe away. It also keeps the rubber from cracking in real cold weather. You see older cars with cracked mouldings because the grease over the corse of years and years fades. I'm not sure I might be wrong. It then again might be one of those things you cant get rid of kind of like the natural sound of any other part of your Z.

07-15-2009, 01:29 AM	#3 (permalink)
cave vulture Enthusiast Member Join Date: May 2009 Location: pennsylvania Posts: 427 Drives: 370z tour,sport,auto Rep Power: 16	I havn't done any cleaning. Just to clarify, the noise is not coming from the hatch itself, but the hard plastic lip that the hatch rests on when closed.

07-15-2009, 02:50 AM	#5 (permalink)
cave vulture Enthusiast Member Join Date: May 2009 Location: pennsylvania Posts: 427 Drives: 370z tour,sport,auto Rep Power: 16	I was thinking of squirting some "Locktite" in there to see if it might help?

07-15-2009, 09:16 AM	#6 (permalink)
SpawnAeroJohn NOT A CURRENT VENDOR Join Date: Jun 2009 Location: Chicago Posts: 609 Drives: you Rep Power: 17	Before doing anything Id study it a little more and then make a decesion if you or the dealer should handle the problem. If you try something then take it to the dealer and they brake something they can blame it on you.

07-15-2009, 12:23 PM	#7 (permalink)
cave vulture Enthusiast Member Join Date: May 2009 Location: pennsylvania Posts: 427 Drives: 370z tour,sport,auto Rep Power: 16	I understand, and what I will probably do is stop by the dealer to hear what he suggests.