Nismo Front Splitter?
 

Anyone know where to get this Nismo Front Splitter & Canards?
http://i358.photobucket.com/albums/o...psa31dd1db.png
it's on the 370z tuner page...so nice!

I'm interested in anyone who has done a custom splitter/Canards for the Nismo 370z as well.

Cheers

I want one too. let me know

hummmm.... the nismo facia is pretty aggressive the way it is. you want it even more aggressive?

I totally agree...it's functional too for down force.

I'm in the middle of converting my front to a Nismo bumper and instead of using the $300 piece of bottom half Fascia, I was trying to see if there are better alternative that's available (like shown).

Perhaps custom fab a splitter and bolt it on?

i think the biggest issue would be that the nismo facia has a little hump in the middle section of the lip. can you fabriate a splitter that follows that hump?

if so, i think it can look good. :)

if you're talking about that tray that goes under the engine, i think you're going to need that for structural stability for the bumper.

I think that's like the hardest part too haha. By no means I'll be able to do it anytime soon. CF isn't my strongest suit. If I made a flat Splitter that doesn't follow the hump, which i'm sure serves some kind of functional purpose, i'm sure it'll still look okay. I'll see....at this point I'm just waiting for someone else to make it.

As for the engine cover tray, that one I cannot skimp on unfortunately. Unless this splitter is one big piece that combines the engine cover tray.

that hump in the center provides ground clearance when you are say driving onto/off those low center median/dividers to make your turn into parking lots and stuff. other then that, i dont think there's any purpose for it having that shape.

interesting! learn something new everyday. cheers

The top center section does raise up. But the black plastic piece under it does not raise up. So there is no difference in ground clearance in the center. It goes straight across. ;)

There is no canards in this picture. That is the end of Nismo bumper it's self. I'm having a hard time trying to see this splitter in this picture. I can see some type of support there for it.

Its there to provide clearance to prevent cosmetic damage. The diffuser under it is functional similar to the diffuser on the base sports package.

there are def canards in that pic...

I don't like canards on the regular 370Z, but due to the duck face like nature of the nismo I think canards break it up enough to make it look more like a car and less like a duck.

I think these are the canards on this particular Z.

http://www.zshop.ca/parts/z34-mcr-cf-front-canards/

Here is another pic of them on a Z

http://www.the370z.com/exterior-inte...r-canards.html

Sorry, I don't think so. Those are not Nismo front bumpers in any of those pictures. And in the picture with the black Nismo. What you are seeing is the curve of the bumper line. The shadow in the picture making it look like one though. ;)

Here is a picture of mine. There is not much of a difference for clearance there. About 1 1/2 inch back if that. Then it goes flat. ;)

thanks for sharing and stop teasing everyone with that brake duct of yours! :tup:

I'm pretty sure there's 2 canards on each side from the picture - It's a really dim picture. The lines are very distinct if you turn up the brightness on the monitor. It looks pretty good too.

seriously there are def 2 canards there.

http://www.the370z.com/attachments/e...psa31dd1db.jpg

This same thing came up in a thread earlier.

http://www.the370z.com/nismo-370z/64...ismo-370z.html

What I see in the green is about 3"~4" long. Can't make out any detail on it.

I bet it's probably a photoshop. But that's how most product is started anyway...as of right now i don't think anyone caters this. I'm sure someone can custom fab it to mold onto the bumper

its a chop of this pic

I guess Nissan does make a Canard for the Nismo Front Fascia....
http://sphotos-b.xx.fbcdn.net/hphoto...28643208_n.jpg
At least for their GT Academy Car.
http://cdn-5.motorsport.com/static/i...5/s1_16369.jpg

i like how it follows the contour of the front. :)

the canards ive seen on the base bumper looks kind of out there, but that nismo one looks like it belongs there.

You guys have canards built in?

You greedy bastards

:D

A little late to the party but just wanted to share. I saw it done on one of the nismo race cars.
It looked pretty good. The center part was filled.

HMMMM.......:yum:

I have been wanting this mod lip for so long

You and a thousand other people. :yum:

hell i want it too!!!!

yummy

I think it compliments the brake ducts very well. On a light colored car the ducts by themselves look weird.

I have been wondering why this hasnt been made to the public... I actually had some visual ideas which now seeing this is exactly what i was thinking, plus have a similar side "blade" add on to the nismo sides like the one EVO-R make for the base 370z and maybe something nice for the rear as a add on thats not over the top...

Now we just gotta find somebody to make it for us!

Looks like you just volunteered to find someone. ;)

right, me with all my contacts. Sponsors have deaf ears towards nismo owners..

EVO-R would probably the one to handle a project like this or password JDM...

They should do a front splitter for the front that incorporates the undershroud plastic piece portion too with a door underneath like the Z speed aluminum under piece so oil changes are a lot easier to get to the filter and drain bolt :)

I believe the 350z had a part from an japan that was like this... Amuse maybe?