How are you supposed to lift up the front end of the car with Amuse Side skirts??

Japanjay · 01-05-2013, 01:35 AM

Ksport makes these also.
Corvette racecar Air Jack system test - YouTube

XwChriswX · 01-05-2013, 05:45 AM

Quote:

Originally Posted by Felix 808

Yep the larger one fits the low profile Harbor Freight Jack. At first it seems like it would slide around as it's a slick feeling polymer, but it's solid once under way. Oh & they come black now not yellow if that matters. & made in the USA

Sorry Canada (Gale Force) even your hockey pucks aren't made in Canada

(Slovokia)

Hockey pucks work, but I think that this will out last a hockey puck because it has more material once the puck is channeled out.

YMMV

Can you post up a pic of the backside of it, and sitting in your jack? I have a craftsman LP jack thats of similar design, and if it looks good, I'll order one right now.

Liquid_G · 01-05-2013, 01:27 PM

+1 for the hockeypucks. I have 2 taped together to jack it up by the pinch rail. Then gwt a jackstand under the frame.

Sent from my SCH-I605 using Tapatalk 2

Felix 808 · 01-05-2013, 02:44 PM

Dadgum, I need to hit this guy up for PR $$$ or at lest a rep

Anyway here are comparisons with a hockey puck

90 ST · 01-05-2013, 02:52 PM

Quote:

Originally Posted by Read T

Or drive it up onto some 2x4s to raise it a bit and jack it up from the frame rails.

I have 4 chunks of 3/4 plywood to drive on to to get my hoist under the car, then pucks on the hoist feet to clear the skirts, lol what a ordeal. lol

cooltoy · 01-05-2013, 05:53 PM

Which one is the hockey puck again?

XwChriswX · 01-06-2013, 12:47 PM

Quote:

Originally Posted by Felix 808

Dadgum, I need to hit this guy up for PR $$$ or at lest a rep

Anyway here are comparisons with a hockey puck

( Click to show/hide )

Awesome, thanks!

Which part number is this one so I can order the right size??

Felix 808 · 01-06-2013, 12:58 PM

Quote:

Originally Posted by XwChriswX

Awesome, thanks!

Which part number is this one so I can order the right size??

Quote:

Originally Posted by Felix 808

I kept the 1006 for my low profile Harbor Freight Jack. It's a little larger than the cup, but as previously mentioned, once it's under way there is no sliding around. It has the flat bottom unlike the Smaller cupped 1007 which is designed to fit over the jack cup of smaller jack bases

What I do to avoid the sliding is place the adapter into the pinch weld & then bring the jack into it. That jack will bit into the adapter & the pinch weld keeps it from popping out. Plus it gives you enough clearance to get under the car

XwChriswX · 01-06-2013, 01:02 PM

Quote:

Originally Posted by Felix 808

What I do to avoid the sliding is place the adapter into the pinch weld & then bring the jack into it. That jack will bit into the adapter & the pinch weld keeps it from popping out. Plus it gives you enough clearance to get under the car

I wonder what the difference is, if you could trim it down so it Does fit in your jack?

Hmm, that's not eh HF model mine resembles... Mine looks like this:

The cup:

( Click to show/hide )

Gonna order one tomorrow. 1006.

Felix 808 · 01-06-2013, 08:27 PM

Quote:

Originally Posted by XwChriswX

I wonder what the difference is, if you could trim it down so it Does fit in your jack?

Yes you could trim it down as it is only polymer. This is the jack that I have. You can also take the cup off this jack & drill the center out of the lifting pad little & it will sit lower on the jack without any sliding trouble.

XwChriswX · 01-06-2013, 08:30 PM

I need some rubber wrap or foam for my jack handle [phrasing!

] as well...

01-05-2013, 01:27 PM	#18 (permalink)
Liquid_G A True Z Fanatic Join Date: Aug 2009 Location: Chicago Burbs Posts: 1,439 Drives: 09 370z Supercharged Rep Power: 44	+1 for the hockeypucks. I have 2 taped together to jack it up by the pinch rail. Then gwt a jackstand under the frame. Sent from my SCH-I605 using Tapatalk 2 __________________

01-05-2013, 02:44 PM	#19 (permalink)
Felix 808 A True Z Fanatic Join Date: Oct 2011 Location: Camarillo, CA Posts: 1,063 Drives: 2011 PW/Grey T/S 7AT Rep Power: 2807	Dadgum, I need to hit this guy up for PR $$$ or at lest a rep Anyway here are comparisons with a hockey puck GaleForce likes this. __________________ Semper Fi Μολὼν λαβέ

01-06-2013, 08:30 PM	#26 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 452	I need some rubber wrap or foam for my jack handle [phrasing! ] as well... __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] WTB: rear spats,side skirts, front lip	tonythetiger	Parts for sale (Private Classifieds)	1	01-08-2013 09:26 PM
WTB Monterey Blue front bumper and side skirts	Jamaica	Wanted	4	06-18-2012 10:29 PM
Evo-r front lip and side skirts black z pics anyone?	Colbizle	Exterior & Interior	3	07-18-2011 10:54 AM
OEM Front bumper and side skirts	Jamaica	Parts for sale (Private Classifieds)	36	06-14-2010 02:02 AM
Need OEM Side Skirts & front sport lip Black (preferably)	kenbains12	Wanted	5	06-10-2010 10:55 PM

01-05-2013, 01:35 AM	#16 (permalink)
Japanjay Track Member Join Date: Mar 2012 Location: Puyallup Posts: 856 Drives: 09 Nissan 370z MB M6 Rep Power: 14	Ksport makes these also. Corvette racecar Air Jack system test - YouTube

01-05-2013, 05:53 PM	#21 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,971 Drives: 14 PW 370Z S/T MT Rep Power: 243722	Which one is the hockey puck again?