Custom A-Pillar gauge pod - lots of pictures

GaleForce · 02-18-2016, 11:11 PM

Quote:

Originally Posted by TBatt

Cubby gauge mount shipped to 35749, please.

Done

GaleForce · 02-18-2016, 11:15 PM

Quote:

Originally Posted by TerribleONE

Awesome as always Mr. Gale

Thank you! Let me know when you want a carbonfiber version for your cubby set up.

Quote:

Originally Posted by YzGyz

I made my own pod set up. IT TOOK FOREVER and lots of trial and error to get the look I wanted. With my diy insight and comparison to Gale's pics, I can say his stuff it top notch! Gales pods are clean! Heck, everything he does is clean and top level!

YzGyz

They are very time consuming. Thank you for the compliments.

Quote:

Originally Posted by dragonbreath

That cubby pod is LEGIT! I'll be looking into that as an option.

I have a "base" ready and waiting to be fabricated into someone's idea.

Kabestro · 02-20-2016, 10:23 PM

So, it's gonna be a couple of weeks for me to get my pillar, but I wanted to know where would be the best place to get power for the wideband? Don't know were I read it, but it was not recommended to wire the wideband to an Acc wire. Where do you guys normally tap into?

zguynate · 02-23-2016, 12:57 PM

Can I get a quote on a double pillar gauge shipped to 38002? And a separate one for the cubby for 2 spots? Im trying to figure out what I want to do. I had the gauges in the dash but ill probably be swapping back to factory gauges there for ECUtek. Idk yet.

GaleForce · 02-23-2016, 08:14 PM

Quote:

Originally Posted by Kabestro

So, it's gonna be a couple of weeks for me to get my pillar, but I wanted to know where would be the best place to get power for the wideband? Don't know were I read it, but it was not recommended to wire the wideband to an Acc wire. Where do you guys normally tap into?

You can find the necessary sources at the left kick panel fuse panel. Use a multimeter and fuse tap on the needed wires.

GaleForce · 02-23-2016, 08:14 PM

Quote:

Originally Posted by dragonbreath

Can I get a quote on a double pillar gauge shipped to 38002? And a separate one for the cubby for 2 spots? Im trying to figure out what I want to do. I had the gauges in the dash but ill probably be swapping back to factory gauges there for ECUtek. Idk yet.

Done

BoneZ · 02-26-2016, 04:45 PM

I'm interested in a single pillar shipped to 30019.

VDesi07 · 03-03-2016, 02:05 AM

Cubby gauge setup shipped to 34119

Sent from my iPhone using Tapatalk

GaleForce · 03-04-2016, 08:10 PM

Quote:

Originally Posted by BoneZ

I'm interested in a single pillar shipped to 30019.

Done

Quote:

Originally Posted by VDesi07

Cubby gauge setup shipped to 34119

Sent from my iPhone using Tapatalk

Done

GaleForce · 03-09-2016, 09:37 AM

More going out to members,

Untitled

jwick · 03-09-2016, 10:48 AM

Mmmmm. Love the premium pillars.

Jason

You think you could pull off a premium pillar for a G now that you've done a few?

GaleForce · 03-09-2016, 12:03 PM

Quote:

Originally Posted by jwick

Mmmmm. Love the premium pillars.

Jason

You think you could pull off a premium pillar for a G now that you've done a few?

Are you talking about having the same look as the 370z pillar? Yes.

jwick · 03-09-2016, 12:43 PM

Yes. I like how they have contours and such. Obviously they would be colored like the G but I like how the pod cups are fancy and don't look like cups molded to the pillar.

maro · 03-09-2016, 05:58 PM

Pm price single silver ring guage and cubby to 85021 thx

GaleForce · 03-10-2016, 12:37 AM

Quote:

Originally Posted by jwick

Yes. I like how they have contours and such. Obviously they would be colored like the G but I like how the pod cups are fancy and don't look like cups molded to the pillar.

I can and should I guess. The only reason I didn't in the first place is because the G37 does't have any of the same design cues. Buuuuut, if it's wanted by the members, I'm more than happy to fabricate it.

02-20-2016, 10:23 PM	#483 (permalink)
Kabestro Enthusiast Member Join Date: Aug 2012 Location: Puerto Rico Posts: 331 Drives: 13 Nissan 370Z MR M6 Rep Power: 40	So, it's gonna be a couple of weeks for me to get my pillar, but I wanted to know where would be the best place to get power for the wideband? Don't know were I read it, but it was not recommended to wire the wideband to an Acc wire. Where do you guys normally tap into? __________________ Stillen Gen 3 CAI / Fast Intentions HFC and CBE 12" Res. (#730) / Swift Springs / 20mm H&R Spacers / Clutch Helper Spring / UpRev Tune 322whp. Last edited by Kabestro; 02-21-2016 at 11:43 AM.

02-23-2016, 12:57 PM	#484 (permalink)
zguynate A True Z Fanatic Join Date: Jan 2012 Location: Strangeland Posts: 1,054 Drives: 09 370z Rep Power: 74	Can I get a quote on a double pillar gauge shipped to 38002? And a separate one for the cubby for 2 spots? Im trying to figure out what I want to do. I had the gauges in the dash but ill probably be swapping back to factory gauges there for ECUtek. Idk yet. __________________ 2009 370z touring w/sports package

02-26-2016, 04:45 PM	#487 (permalink)
BoneZ A True Z Fanatic Join Date: May 2015 Location: Atlanta, GA Age: 53 Posts: 9,299 Drives: 2012 Blue BallZ Rep Power: 2684383	I'm interested in a single pillar shipped to 30019. kenchan likes this. __________________ *“Happiness is having a large, loving, caring, close-knit family in another city.”-George Burns Last edited by BoneZ; 02-26-2016 at 06:36 PM.*

03-03-2016, 02:05 AM	#488 (permalink)
VDesi07 Base Member Join Date: Apr 2014 Location: Orlando Posts: 90 Drives: 14' White 370z Sport Rep Power: 12	Cubby gauge setup shipped to 34119 Sent from my iPhone using Tapatalk __________________ 2014 PW Sport 370z 326hp/267tq Z1 CAI, AAM Short Tails, Art Pipes, BC Coils, UpRev Tuned

03-09-2016, 09:37 AM	#490 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	More going out to members, Untitled gbrettin, osbornsm, axmea? and 1 others like this. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

03-09-2016, 10:48 AM	#491 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465057	Mmmmm. Love the premium pillars. Jason You think you could pull off a premium pillar for a G now that you've done a few? GaleForce likes this. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

03-09-2016, 12:43 PM	#493 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465057	Yes. I like how they have contours and such. Obviously they would be colored like the G but I like how the pod cups are fancy and don't look like cups molded to the pillar. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

03-09-2016, 05:58 PM	#494 (permalink)
maro Enthusiast Member Join Date: May 2010 Location: Az Posts: 414 Drives: PW Maro Z Rep Power: 16	Pm price single silver ring guage and cubby to 85021 thx

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
A-Pillar Gauge Pods?	RCZ	Exterior & Interior	64	05-27-2014 09:16 PM
Custom "A" pillar gauge pods	Baer383	Exterior & Interior	41	10-17-2012 09:27 AM
New Custom made sub box. Zenclosure style. Lots of pictures.	Dsevast	Audio & Video	13	03-26-2012 10:45 AM
A-Pillar Gauge Pod	Tommy G	Exterior & Interior	7	07-28-2011 12:56 PM
Gauge Pillar	Snakes709	Exterior & Interior	15	12-21-2009 08:25 PM