Carbon Fiber B pillars ready to order!
 

Carbon fiber B pillars ready to order!

No these are not overlays.
No these are not carbon fiber skinned products with fiberglass backings.

These are 3 layers of pure grade A carbon fiber layered over each other in different angles for a strong great looking authentic carbon fiber product!

Yes they are guaranteed for the life of your car.
Yes they are direct replacements!
Yes they fit as perfect as the OEM ones.

No gaps, no crooked lines, no waves or ripples like on our competitor products (the cheaper ones)

Some companies sell these for $250.00
the370z.com price $199.99!


How to install??

Pop off the old ones (They pop off like legos, no bolts or screws)
Clean the area with degreaser and move the gaskets to the new B pillars.
Remove the 3M backing on the B pillars, line them up, and press! Takes a few min to install!
Close the door, step back, and enjoy :)

Guaranteed fit!

Keep in mind even though we have competitors that offer these for less than $150. Think of it this way. The way we make ours is with vacuum infusion. The molds are laid up dry and held under a vacuum bag for an hr before infusing the products with resin. Doing that ensures each product is made with out any contaminants such as moisture or air. We then infuse each product with 100% epoxy resin which we all know is 10x better for carbon fiber than any other resin. Now we don’t know how our competitors are doing it for so cheap. But if other companies can do it cheaper. Then its safe to say they are using cheaper materials. Cheaper resins cant take heat, fade, crack, chip, and have a blue tint to them.

Here are some pics. And judge for your selves. All our products are guaranteed quality!

In the mold
http://i623.photobucket.com/albums/t...m/SSPX1799.jpg

Out the mold
http://i623.photobucket.com/albums/t...m/SSPX1800.jpg

The back 100% carbon fiber and epoxy resin.
http://i623.photobucket.com/albums/t...m/SSPX1796.jpg

At the scale they weigh 1 oz each. Yours will weigh 1.2 - 1.5 oz each. (16 oz in a lb)
http://i623.photobucket.com/albums/t...m/SSPX1796.jpg

And the two together before final sanding and clear coating.
http://i623.photobucket.com/albums/t...m/SSPX1795.jpg

http://i623.photobucket.com/albums/t...m/SSPX1825.jpg

http://i623.photobucket.com/albums/t...m/SSPX1827.jpg

Quality guarantee! These can be direct replacements or overlays. Will come with enough 3M tape to take care of the whole job + a little extra for those who need to do everything twice before getting it right :P.

P.S You cant tell with out the clear coat but the body line that the original ones have going vertically will also be there.

PM to order!

AWESOME JOHN!!! Those will look great on my car for the ride home :D

bullitt5897

If you could shoot some pictures and describe the install that would be helpful.

Thanks!

^ wtf haha

Cool, I'm waiting for pics too :)

I can post install pictures and a how to when I install it since Ill be installing it a day or 2 before bullitt comes down to pick up his car. He also said hell be bringing his pro cam so we can take some good pictures. Then I or he can post em up!

The camera will be with me saturday :D

I will give you copies of the pics too ;)

So the black plastic piece comes off right?

Weight savings?? LOL

What will you have on there besides the pillars? Give me a call when you get back so I can check it out.

I actually think they weigh more than the black plastic ones. :icon14:

Juuust kidding. Its equal or less. I didnt get a chance to weigh it yet but Ill get results tonight.

Its made up of 3 layers of 5.7oz cf.

yep, im interested. let me know how easy it is to do and maybe ill buy a set!

John they look great, what about the window delete? Are you still planning on making these? Sorry, not to change the subject.

As of now no window deletes unless we get another Z here any time after Sat the 11th. Id like to make them but we didnt have any time :(

once i see it in on the 370z if it will look good i will def buy =]

If the stock black piece comes off and these go in easily with no gaps or anything like that, let me know which payment methods you prefer/accept.

:tup:

I don't see any pictures.....

It's not Saturday :icon18:

:P

yes please update on the ease of install.

I also hope for a 1-piece b-pillar + rear window delete!!!

Ease of install updated page 1!

hey bullitt. where in duluth do u live? i would love to see it in person.

Direct replacement. Awsome, waiting for pics to Order!

Johns Creek... by the whole foods off states bridge. I pick the car up saturday afternoon!!!

I'd like to see how these will look on the car.

Great news! We have a couple different types of epoxy here currently that we are experimenting with. The last epoxy only was able to take up to 120F which is no good at all. We laid up a yellow carbon / kevlar panel today with a different type of epoxy that can take at least 100 more so tomorrow we will wet sand, buff, polish, clear, and bake it to see if its good enough :)

No way will I ever send you guys an inferior product! If it does not last it does not pass!

damn they pop off that easy?! anyway to secure the new one more so it wont be pulled off?

wow, cant wait for the pics!

We are not far apart. I live in Sugarloaf so its about 10 minutes.

Pics coming soon :)

Patiently waiting. :D

Here are some successful pics! These just need a little cleaning, sanding on the sides and clear coat (these will be display models)

Again the first official set is reserved for bullitt which will be created tomorrow.

Any orders after that will be created during the creating of some front bumper license plate backings that were already ordered. We only took so long because we were looking for the right resin that can withstand the heat of the sun. Looks like we got it :)

Here are some pics.

In the mold
http://i623.photobucket.com/albums/t...m/SSPX1799.jpg

Out the mold
http://i623.photobucket.com/albums/t...m/SSPX1800.jpg

The back 100% carbon fiber and epoxy resin.
http://i623.photobucket.com/albums/t...m/SSPX1796.jpg

At the scale they weigh 1 oz each. Yours will weigh 1.2 - 1.5 oz each. (16 oz in a lb)
http://i623.photobucket.com/albums/t...m/SSPX1796.jpg

And the two together before final sanding and clear coating.
http://i623.photobucket.com/albums/t...m/SSPX1795.jpg

Quality guarantee! These can be direct replacements or overlays. Will come with enough 3M tape to take care of the whole job + a little extra for those who need to do everything twice before getting it right :P.

P.S You cant tell with out the clear coat but the body line that the original ones have going vertically will also be there.

PM to order!

Looks great John

Thanks budskie!

Bringing this to the front so its not left behind.

Carbon fiber B pillars ready to order!

No these are not overlays.
No these are not carbon fiber skinned products with fiberglass backings.

These are 3 layers of pure grade A carbon fiber layered over eachother in different angles for a strong great looking authentic carbon fiber product!

Yes they are warrantied for the life of your car.
Yes they are direct replacements!
Yes they fit as perfect as the OEM ones.

No gaps, no crooked lines.

MSRP $225.00 + $15 for shipping US.
The370Z.com price $200 + $15 for shipping anywhere in the world
Introductory price $200 + free shipping anywhere in the North America.

How to install??

Pop off the old ones (They pop off like legos, no bolts or screws)
Clean the area with degreaser and move the gaskets to the new B pillars.
Remove the 3M backing on the B pillars, line them up, and press! Takes a few min to install!
Close the door, step back, and enjoy :)

Guaranteed fit!

We will make the first set tomorrow for bullitt. Then we will make more to stock them.

Here are some successful pics! These just need a little cleaning, sanding on the sides and clear coat (these will be display models)

Again the first official set is reserved for bullitt which will be created tomorrow.

Any orders after that will be created during the creating of some front bumper license plate backings that were already ordered. We only took so long because we were looking for the right resin that can withstand the heat of the sun. Looks like we got it :)

Here are some pics.

In the mold
http://i623.photobucket.com/albums/t...m/SSPX1799.jpg

Out the mold
http://i623.photobucket.com/albums/t...m/SSPX1800.jpg

The back 100% carbon fiber and epoxy resin.
http://i623.photobucket.com/albums/t...m/SSPX1796.jpg

At the scale they weigh 1 oz each. Yours will weigh 1.2 - 1.5 oz each. (16 oz in a lb)
http://i623.photobucket.com/albums/t...m/SSPX1796.jpg

And the two together before final sanding and clear coating.
http://i623.photobucket.com/albums/t...m/SSPX1795.jpg

Quality guarantee! These can be direct replacements or overlays. Will come with enough 3M tape to take care of the whole job + a little extra for those who need to do everything twice before getting it right :P.

P.S You cant tell with out the clear coat but the body line that the original ones have going vertically will also be there.

PM to order!

in for installed pics

very well done, thank you. Ill see if I can scrounge up the money

Sounds good take all the time you need bud!

wow this thing totally makes me get rid of the idea of doing overlays

John...... That looks GREAT!! I will pick up some of these when I get my Z!!! Can't wait to see what you do with spoilers and everything else!

Thanks bud! BUmp!

How prone is it to scuff and scratch the surface of the clear coat? The OEM black ones get dull so easily, and I've only had the car for less than 3 months.

Is there any way to see a picture of this mounted on the car? Or maybe somebody has Mad Photoshop Skillz!