Looks great John

Thanks budskie!

Bringing this to the front so its not left behind.

Carbon fiber B pillars ready to order!

No these are not overlays.
No these are not carbon fiber skinned products with fiberglass backings.

These are 3 layers of pure grade A carbon fiber layered over eachother in different angles for a strong great looking authentic carbon fiber product!

Yes they are warrantied for the life of your car.
Yes they are direct replacements!
Yes they fit as perfect as the OEM ones.

No gaps, no crooked lines.

MSRP $225.00 + $15 for shipping US.
The370Z.com price $200 + $15 for shipping anywhere in the world
Introductory price $200 + free shipping anywhere in the North America.

How to install??

Pop off the old ones (They pop off like legos, no bolts or screws)
Clean the area with degreaser and move the gaskets to the new B pillars.
Remove the 3M backing on the B pillars, line them up, and press! Takes a few min to install!
Close the door, step back, and enjoy :)

Guaranteed fit!

We will make the first set tomorrow for bullitt. Then we will make more to stock them.

Here are some successful pics! These just need a little cleaning, sanding on the sides and clear coat (these will be display models)

Again the first official set is reserved for bullitt which will be created tomorrow.

Any orders after that will be created during the creating of some front bumper license plate backings that were already ordered. We only took so long because we were looking for the right resin that can withstand the heat of the sun. Looks like we got it :)

Here are some pics.

In the mold
http://i623.photobucket.com/albums/t...m/SSPX1799.jpg

Out the mold
http://i623.photobucket.com/albums/t...m/SSPX1800.jpg

The back 100% carbon fiber and epoxy resin.
http://i623.photobucket.com/albums/t...m/SSPX1796.jpg

At the scale they weigh 1 oz each. Yours will weigh 1.2 - 1.5 oz each. (16 oz in a lb)
http://i623.photobucket.com/albums/t...m/SSPX1796.jpg

And the two together before final sanding and clear coating.
http://i623.photobucket.com/albums/t...m/SSPX1795.jpg

Quality guarantee! These can be direct replacements or overlays. Will come with enough 3M tape to take care of the whole job + a little extra for those who need to do everything twice before getting it right :P.

P.S You cant tell with out the clear coat but the body line that the original ones have going vertically will also be there.

PM to order!

in for installed pics

very well done, thank you. Ill see if I can scrounge up the money

Sounds good take all the time you need bud!

wow this thing totally makes me get rid of the idea of doing overlays

John...... That looks GREAT!! I will pick up some of these when I get my Z!!! Can't wait to see what you do with spoilers and everything else!

Thanks bud! BUmp!

How prone is it to scuff and scratch the surface of the clear coat? The OEM black ones get dull so easily, and I've only had the car for less than 3 months.

Is there any way to see a picture of this mounted on the car? Or maybe somebody has Mad Photoshop Skillz!

We use the best qulaity dupont clear coat available on todays market. It dries to a rock hard coating.

As far as pictures of it put up. Ill see what I can do by just going to a local dealer and placing them on just to snap pictures but I dont know how that will go ha.

Why don't you just ship them to me and I will take pics of them installed for you.....and then misplace them :ugh2:

Sneaky snake! PMed!

money sent! when I get them ill install and take pics asap! thanks!

Hey John,

How will they install as a replacement part? There are tabs that the OEM pieces attach to that go into the body? What about the weather striping around the piece?