NISMO RC front bumper

HKYStormFront · 11-13-2012, 08:42 PM

Quote:

Originally Posted by dmhenderson

Pictured here:

Does anyone make a replica? I know you can buy the brake ducts but I like the whole thing (grille included). If there isn't a replica yet, why not?

did you post this from your personal photobucket? i've got no problem with people linking to my pictures but i prefer for them to stay on my website...

also, that is, in fact, an OEM front bumper and $600 for the set sounds about right. that doesn't include the ducting to the brakes either. might want to contact DWW Motorsports, the shop that built Brian's car, for more information since they run it on their car.

dmhenderson · 11-13-2012, 08:47 PM

It was linked from another post on this forum located here:

370z Nismo Daily Pics and Fresh Pics

It isn't from my photobucket but I don't think that reposting an image from another thread here counts as image leeching but maybe that's just me.

dmhenderson · 11-13-2012, 08:48 PM

Yeah $600 for the set + 130 for the ducting kit + install sounds a LOT more reasonable. I'm going to poke around and see what I can find.

HKYStormFront · 11-13-2012, 08:54 PM

Quote:

Originally Posted by dmhenderson

It was linked from another post on this forum located here:

370z Nismo Daily Pics and Fresh Pics

It isn't from my photobucket but I don't think that reposting an image from another thread here counts as image leeching but maybe that's just me.

appreciate it

dmhenderson · 11-13-2012, 08:58 PM

Sure, I wasn't attempting to steal pictures or anything. Really love the look quite a bit though and I've been itching for a new project.

HKYStormFront · 11-13-2012, 09:13 PM

oh no man, don't get me wrong. i was just trying to find out who put it up on their photobucket. i've got no problem with people sharing my pictures, quite the opposite. i'd just prefer they use my website (which has a handy share button) to do it since it brings traffic to my site

DCNISMO · 11-13-2012, 09:26 PM

The Stillen ducting kit is made to work with the non Nismo bumper. They will not directly work with the oem Nismo ducts. I think you have to make your own hose kit to use these ducts and im not sure Nissan has a hose kit for public sale either.

MJB · 11-13-2012, 09:30 PM

Quote:

Originally Posted by dmhenderson

Yeah $600 for the set + 130 for the ducting kit + install sounds a LOT more reasonable. I'm going to poke around and see what I can find.

Even then, 600 bucks for two small pieces of carbon fiber is ridiculous. I wish someone would make some replicas of these.

HKYStormFront · 11-13-2012, 09:35 PM

Quote:

Originally Posted by MJB

Even then, 600 bucks for two small pieces of carbon fiber is ridiculous. I wish someone would make some replicas of these.

there are people working on it... not sure how close they are to production. to make them out of real carbon was not going to save much money.

dmhenderson · 11-13-2012, 09:50 PM

Quote:

Originally Posted by HKYStormFront

there are people working on it... not sure how close they are to production. to make them out of real carbon was not going to save much money.

He's right. Check out CFE's prices for say..a carbon shifter boot cover. I can see $600 for those two pieces easy. Love the look but want a "real" number (that isn't $2000) to get it up and running.

eastwest2300 · 11-13-2012, 10:02 PM

Quote:

Originally Posted by GaleForce

You can cut the bumper yourself. Don't need a Bodyshop to do that. Measure twice, cut once...

This is true...

dmhenderson · 11-13-2012, 10:12 PM

Quote:

Originally Posted by eastwest2300

This is true...

Nope, learned my lesson. The cost of fixing my mistakes is much greater than if I had just paid someone to do it and hung out to learn what to do.

GaleForce · 11-13-2012, 10:55 PM

Quote:

Originally Posted by dmhenderson

Nope, learned my lesson. The cost of fixing my mistakes is much greater than if I had just paid someone to do it and hung out to learn what to do.

Bah! If I can shave the front hamburger, you can cut a couple of holes in your bumper.

dmhenderson · 11-13-2012, 11:16 PM

Ok I shaved my front (and rear) hamburgers off just fine for the EVO-R emblems but the headlight disaster was... well it was a thing.

dic-k-ing (this is a filtered word???) up the front bumper would be more expensive than replacing a pair of headlights so I'll probably use my guys at D&V who work on lambos and like doing this kind of stuff plus they don't mind letting me hang around while they do their thing.

Rusty · 11-13-2012, 11:53 PM

Quote:

Originally Posted by dmhenderson

What are the part numbers for those vents and where can I buy them? Do I have to buy them direct from Nissan? Rusty's thread is a bit long.

Edit: Also, you're right. The paint job was throwing me a bit. It just has vents. Those would look fantastic on my car.

Go to page 6 of my thread. That's where the brake duct install starts.

If you have any questions about the install. Let me know. The only thing I ran into is the placement of the windshield washer bottle on the right side. Not a lot of room to put the brake hose through there. Any hose bigger then the one in the Stillen kit won't fit unless you remove the washer bottle. And I had to shorten the back of the ducts too.

Part numbers:
Left: 41153-RTZ40, List $612.00
Right: 41152-RTZ40, List $612.00

11-13-2012, 08:47 PM	#17 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 26	It was linked from another post on this forum located here: 370z Nismo Daily Pics and Fresh Pics It isn't from my photobucket but I don't think that reposting an image from another thread here counts as image leeching but maybe that's just me. __________________

11-13-2012, 08:48 PM	#18 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 26	Yeah $600 for the set + 130 for the ducting kit + install sounds a LOT more reasonable. I'm going to poke around and see what I can find. __________________

11-13-2012, 08:58 PM	#20 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 26	Sure, I wasn't attempting to steal pictures or anything. Really love the look quite a bit though and I've been itching for a new project. __________________

11-13-2012, 09:13 PM	#21 (permalink)
HKYStormFront A True Z Fanatic Join Date: Apr 2009 Location: Greer, SC Posts: 14,954 Drives: 06 Frontier SE 6spd Rep Power: 52	oh no man, don't get me wrong. i was just trying to find out who put it up on their photobucket. i've got no problem with people sharing my pictures, quite the opposite. i'd just prefer they use my website (which has a handy share button) to do it since it brings traffic to my site __________________ Patrick // 06 Frontier 6spd Nismosis // Mods: Uprev Tuned @ Z1 Motorsports: 257whp & 292 ft lbs 09 Pontiac G8 GXP // M6 // Sunroof // Tint... For now

11-13-2012, 11:16 PM	#29 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 26	Ok I shaved my front (and rear) hamburgers off just fine for the EVO-R emblems but the headlight disaster was... well it was a thing. dic-k-ing (this is a filtered word???) up the front bumper would be more expensive than replacing a pair of headlights so I'll probably use my guys at D&V who work on lambos and like doing this kind of stuff plus they don't mind letting me hang around while they do their thing. __________________

11-13-2012, 09:26 PM	#22 (permalink)
DCNISMO Track Member Join Date: Nov 2011 Location: washington dc Posts: 995 Drives: Nismo Z Rep Power: 179	The Stillen ducting kit is made to work with the non Nismo bumper. They will not directly work with the oem Nismo ducts. I think you have to make your own hose kit to use these ducts and im not sure Nissan has a hose kit for public sale either.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] NISMO front bumper	owi1kenobi	Parts for sale (Private Classifieds)	0	07-29-2012 10:22 PM
Nismo front bumper	tommyguns	Exterior & Interior	8	10-18-2011 12:48 PM
Nismo front bumper	Mo559	Exterior & Interior	5	06-01-2011 11:27 AM
FS:Stock Parts Black~Hood,Sideskirts,Front Bumper,Rear Bumper,Nismo Spoiler,Intakes	Tango	Parts for sale (Private Classifieds)	19	10-04-2010 09:25 PM
WTB: Nismo front bumper in PG	Cjanik	Wanted	0	07-13-2010 12:52 AM