e brake handle options

redondoaveb · 01-14-2020, 02:36 PM

Quote:

Originally Posted by Xplicit97

Bump from the dead any new information on this?

Here's my Shift Solutions e brake handle

Krylon · 01-14-2020, 05:10 PM

Quote:

Originally Posted by redondoaveb

Here's my Shift Solutions e brake handle

How was the install? I've never messed with the ebrake in any of my vehicles.

redondoaveb · 01-14-2020, 05:28 PM

Quote:

Originally Posted by Krylon

How was the install? I've never messed with the ebrake in any of my vehicles.

Here's a tutorial to do the NRG handle which is pretty easy. The Shift Solutions that I did required a lot more modifications. I had to cut off the circled area plus some other mods on top of what needed to be done for the NRG handle. It was quite a bit of work but not super difficult.

redondoaveb · 01-14-2020, 05:31 PM

I have a completed handle with the NRG handle and a Redline Goods alcantara e brake boot I'd be willing to sell.

Da370z · 06-22-2023, 02:41 PM

Quote:

Originally Posted by redondoaveb

I have a completed handle with the NRG handle and a Redline Goods alcantara e brake boot I'd be willing to sell.

I know old post but is this still available or did you sell it allready?

redondoaveb · 06-22-2023, 03:47 PM

Quote:

Originally Posted by Da370z

I know old post but is this still available or did you sell it allready?

Was that you that contacted me on IG? If not, that one is sold but I custom build them to order so I can build whatever style you want. Usually a 2 week turnaround. I don't build them with the NGR handle, that was just a test handle. Here are a couple samples of what i do.

BoilardZ · 06-30-2023, 11:50 PM

Guys:
For those wanting a nice look, a good price, and a simple install, I recommend this one from Autotrimming (available on ebay):
https://www.ebay.com/itm/184476105144
It's made specifically for the 370z. It's available with several different stitch colors, and it's only about 23 bucks. Best of all, it's easy to install. All I did was carefully pry off the rectangular rubber seal around the base of the e-brake. Then I slid on the gaiter (a cinch!) and stuffed the bottom skirt down through the opening. Then I reinstalled the rubber seal. It's held in with about 15-20 little rubber tabs that stick through slots in the plastic center console.
Here's a picture of the finished product.
Cheers,
Steve

Tractionless · 07-01-2023, 09:40 AM

Quote:

Originally Posted by BoilardZ

Guys:
For those wanting a nice look, a good price, and a simple install, I recommend this one from Autotrimming (available on ebay):
https://www.ebay.com/itm/184476105144
It's made specifically for the 370z. It's available with several different stitch colors, and it's only about 23 bucks. Best of all, it's easy to install. All I did was carefully pry off the rectangular rubber seal around the base of the e-brake. Then I slid on the gaiter (a cinch!) and stuffed the bottom skirt down through the opening. Then I reinstalled the rubber seal. It's held in with about 15-20 little rubber tabs that stick through slots in the plastic center console.
Here's a picture of the finished product.
Cheers,
Steve

I can vouch as I have the same but simply tucked into the OE rubber seal with a plastic pry tool.
Wish there was an easy solution for the exposed handle though.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Door Handle	theboydiddy	Exterior & Interior	5	03-20-2012 10:04 AM
Can it handle it??	UltraIron1	Forced Induction	82	06-18-2011 02:25 AM
civic e brake handle fits our 370z ;)	simota1	Exterior & Interior	24	08-06-2010 10:03 AM
Relentless Autosports: Your source for all Akebono brake kits, options, and supplies	Scott @ RA	Suspension/Brakes	1	07-02-2010 07:55 PM
Brake Options Everywhere	370Ztune	Brakes & Suspension	9	02-05-2009 12:24 PM