Robispec Harness Bar Install

Rusty · 09-11-2012, 05:50 PM

Hi all. This is for the Robispec Harness Bar Install. Instead of doing a complete detail write on removing the interior panels. Others have all ready done it. So I'm skipping that part. But I'm posting a link to what Dustin@Z1 did. It's an excellent write on it.

Removing the Trunk Interior on a 370Z -> Z1 Motorsports

Rusty · 09-11-2012, 05:52 PM

This is the Robispec with the aluminium spacers on the ends. That you will use.

cdoxp800 · 09-11-2012, 06:03 PM

Nice.. I just ordered mine today..

Rusty · 09-11-2012, 06:05 PM

Once you have the stock bar out. Put your spacer plates that was on the end of the Robispec harness bar in place on the frame bracket sticking out. The bar and spacer plates ONLY go in one way. They WILL NOT fit the other way. THE ROUNDED PART OF THE SPACER PLATE IS ON TOP! SAME WITH THE BAR! My bar went in tight. Thought for awhile that I might have to use a porti-power to jack the frame apart. Had the bar in backwards.

Turned the bar around. And it was still on the tight side. But it went in. I put the driver side spacer in first. Next I put the bar in. Raised up the right side alittle and dropped the that spacer into place. Align the bolt holes, and used the bolts that came with the bar.

Carbon_z · 09-11-2012, 06:09 PM

Thats awesome..

Rusty · 09-11-2012, 06:10 PM

Next. In the first picture. PUT THAT PIECE IN FIRST, before the other panels. Other wise you WILL BE CUSSIN"! Then reassemble your interior. Play attention to the clips and screws that you took out the how they fasten.

and there you go. All done.

GaleForce · 09-11-2012, 06:36 PM

Very nice!

So is this a suitable solution for using racing harnesses now?

binary0x01 · 09-11-2012, 06:40 PM

I don't see it on their website, where do you guys order it from?

Btw, how long did the install take?

martin82 · 09-11-2012, 07:28 PM

you can email/call them directly.

c41006 · 09-11-2012, 07:45 PM

Nice

binary0x01 · 09-11-2012, 07:46 PM

Quote:

Originally Posted by martin82

you can email/call them directly.

Thanks.

binary0x01 · 09-11-2012, 08:07 PM

Do post your feedback btw

Rusty · 09-11-2012, 11:44 PM

Quote:

Originally Posted by binary0x01

I don't see it on their website, where do you guys order it from?

Btw, how long did the install take?

I can do it in about 4 hours now. Since I know how the interior comes apart now.

Rusty · 09-11-2012, 11:47 PM

Quote:

Originally Posted by binary0x01

Do post your feedback btw

It's a red bar that's behind the seats. What more can I say. LOL It's stronger then the cheezy stock piece I took out. It has solid mounting to the frame that the stock bar didn't have. And it looks good.

FireDan50 · 09-12-2012, 06:00 AM

I just ordered mine today too

Do you plan on adding harnesses/seats also? I have Sparco Pro 2000 seats now and just purchased Takata harnesses with snap in mounts linked in the other Robispec chassis/harness bar thread on page 3.

09-11-2012, 06:03 PM	#3 (permalink)
cdoxp800 A True Z Fanatic Join Date: May 2009 Location: FL Posts: 1,337 Drives: 2011 Nismo Rep Power: 19	Nice.. I just ordered mine today.. __________________ 2011 Brilliant Silver NISMO 370z. #: 0046. PPE LTH \| MillSpec Cats \| F.I Exhaust \| Akuma Intakes \| Rotora 6/4 Brakes

09-11-2012, 06:09 PM	#5 (permalink)
Carbon_z A True Z Fanatic Join Date: Sep 2009 Location: Atlanta, GA Posts: 1,694 Drives: Carbon Fiber 370z Rep Power: 19	Thats awesome.. __________________ Full Carbon Fiber Nissan 370z "400zTT" Fully Built 4.0L Twin Turbo 1300hp, 1100whp. Follow me on Instagram at http://www.instagram.com/carbonz.

09-11-2012, 06:36 PM	#7 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	Very nice! So is this a suitable solution for using racing harnesses now? __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

09-11-2012, 06:40 PM	#8 (permalink)
binary0x01 Track Member Join Date: Jun 2012 Location: Idaho Posts: 892 Drives: 2012 6-SPEED 3.7L Z Rep Power: 14	I don't see it on their website, where do you guys order it from? Btw, how long did the install take? __________________ Tune (by Seb@SpecialtyZ) -- Upgraded Parts List : When in doubt, use brute force; if it doesn't work, you aren't using enough.

09-11-2012, 07:45 PM	#10 (permalink)
c41006 A True Z Fanatic Join Date: Oct 2010 Location: Atlanta Posts: 9,034 Drives: '10 G37 Coupe BO 7AT Rep Power: 114	Nice __________________ The plaque for the alternates is down in the ladies room

09-11-2012, 07:28 PM	#9 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	you can email/call them directly.

09-11-2012, 08:07 PM	#12 (permalink)
binary0x01 Track Member Join Date: Jun 2012 Location: Idaho Posts: 892 Drives: 2012 6-SPEED 3.7L Z Rep Power: 14	Do post your feedback btw __________________ Tune (by Seb@SpecialtyZ) -- Upgraded Parts List : When in doubt, use brute force; if it doesn't work, you aren't using enough.

09-12-2012, 06:00 AM	#15 (permalink)
FireDan50 Track Member Join Date: Mar 2012 Location: San Antonio Posts: 714 Drives: '09 370Z PW M6 Rep Power: 19	I just ordered mine today too Do you plan on adding harnesses/seats also? I have Sparco Pro 2000 seats now and just purchased Takata harnesses with snap in mounts linked in the other Robispec chassis/harness bar thread on page 3.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Robispec Chassis/Harness Bar	ZInferno0248	Brakes & Suspension	105	08-30-2013 11:07 AM
New harness for aftermarket install	bigaudiofanat	Audio & Video	18	09-11-2011 11:58 AM