Robispec Harness Bar Install

Rusty · 09-12-2012, 06:20 AM

I want seats. Just don't know when. Got other things I want/need.

takjak2 · 09-12-2012, 11:04 AM

Thanks for the pics. Can't wait for mine to get in. Brackets and sliders for my seat are also on the way

sweetazzz16 · 09-12-2012, 11:29 AM

I was wondering how much this harness bar is. Just started researching everything that goes into a racing seat setup with a 4 point harness. I want to do things correctly so a harness bar is what i want to start with.

How much for the bar? (I have tried calling robi spec and can't get a hold of them so i will keep trying)

FireDan50 · 09-12-2012, 11:58 AM

Email him....thats the fastest way I've found to communicate with them.

Robispec · 09-12-2012, 01:55 PM

Quote:

Originally Posted by Rusty

It's a red bar that's behind the seats. What more can I say. LOL It's stronger then the cheezy stock piece I took out. It has solid mounting to the frame that the stock bar didn't have. And it looks good.

Stiffens the "ring module" portion of the chassis too. Looks really NICE.

FireDan50 · 09-12-2012, 02:10 PM

Quote:

Originally Posted by Robispec

Stiffens the "ring module" portion of the chassis too. Looks really NICE.

Robi! Nice to see you on here. I just placed my order and sent you payment via paypal for my bar. Seems like you're getting hit up a lot for this lately

ZInferno0248 · 09-12-2012, 07:40 PM

Quote:

Originally Posted by Robispec

Stiffens the "ring module" portion of the chassis too. Looks really NICE.

Robert... Thank you again for doing these. Mine came yesterday, looks great.

Matt.

ZInferno0248 · 09-12-2012, 07:41 PM

Quote:

Originally Posted by Rusty

Hi all. This is for the Robispec Harness Bar Install. Instead of doing a complete detail write on removing the interior panels. Others have all ready done it. So I'm skipping that part. But I'm posting a link to what Dustin@Z1 did. It's an excellent write on it.

Removing the Trunk Interior on a 370Z -> Z1 Motorsports

Rusty... Awesome idea putting the install up like this

Rusty · 09-12-2012, 10:03 PM

Quote:

Originally Posted by ZInferno0248

Rusty... Awesome idea putting the install up like this

Thanks.

TypeOne · 09-13-2012, 09:55 AM

Looks really cool! I saw these when he made his and thought it was a neat idea.

FireDan50 · 12-22-2012, 12:14 PM

Just thought I'd share my install and review of Robispec's bar. Taking out all the plastic pieces from the trunk to middle of the car (side sills) was a pain in the butt, but putting the bar in was super easy. Robispec's piece fit like a glove and was made very well. You can definitely tell the difference in strength of this bar over the OEM one. The powder coating was awesome and I would totally recommend this bar to anyone.

GaleForce · 12-22-2012, 02:36 PM

Quote:

Originally Posted by FireDan50

Just thought I'd share my install and review of Robispec's bar. Taking out all the plastic pieces from the trunk to middle of the car (side sills) was a pain in the butt, but putting the bar in was super easy. Robispec's piece fit like a glove and was made very well. You can definitely tell the difference in strength of this bar over the OEM one. The powder coating was awesome and I would totally recommend this bar to anyone.

Do you have any more info for your harness install? What parts you used, etc?

FireDan50 · 12-23-2012, 02:35 AM

Quote:

Originally Posted by GaleForce

Do you have any more info for your harness install? What parts you used, etc?

The harnesses are Takata Drift II clip-in. I used Rennline harness mounts; one side installed on the seat belt anchor point and other on the provided mounting point on the seat brackets I have. Only thing I don't like about it is that because they're not mounted the same distances, one side of the waist harness is a little longer than the other when tightened. I don't think its a safety concern, just a pet peeve and it not being symmetrical; hope that makes sense.

Harness Mount - Door Side-Rennline, Inc.

This pic shows the "tunnel-side" mounting location where I installed the Rennline harness mount with the OEM seat belt buckle, so I can use either the harnesses or the regular seat belt.

Hope that helps. Post up if anyone has any other suggestions/input/concerns. I'm by no means a professional installer/modifier and always looking to learn and also help out by providing info on stuff like this.

GaleForce · 12-23-2012, 09:14 AM

Quote:

Originally Posted by FireDan50

The harnesses are Takata Drift II clip-in. I used Rennline harness mounts; one side installed on the seat belt anchor point and other on the provided mounting point on the seat brackets I have. Only thing I don't like about it is that because they're not mounted the same distances, one side of the waist harness is a little longer than the other when tightened. I don't think its a safety concern, just a pet peeve and it not being symmetrical; hope that makes sense.

Harness Mount - Door Side-Rennline, Inc.

This pic shows the "tunnel-side" mounting location where I installed the Rennline harness mount with the OEM seat belt buckle, so I can use either the harnesses or the regular seat belt.

Hope that helps. Post up if anyone has any other suggestions/input/concerns. I'm by no means a professional installer/modifier and always looking to learn and also help out by providing info on stuff like this.

Thanks for the reply. It will help for when I get aftermarket seats.

FireDan50 · 12-23-2012, 09:31 AM

DO NOT get these Planted seat brackets....they are not straight/level and make the seats tilted making you have to do some modification/fabrication for seats to look right.

09-12-2012, 06:20 AM	#16 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,180 Drives: 2011 Nismo GM 6M Rep Power: 2684437	I want seats. Just don't know when. Got other things I want/need. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

09-12-2012, 11:04 AM	#17 (permalink)
takjak2 A True Z Fanatic Join Date: Feb 2011 Location: Sterling, VA Posts: 1,922 Drives: Legit Racecar 370Z Rep Power: 142	Thanks for the pics. Can't wait for mine to get in. Brackets and sliders for my seat are also on the way __________________ Mods \| Stuff \| Things \| Seat Time \| Nismo facebook.com/TeamSparrowSpeed

12-22-2012, 12:14 PM	#26 (permalink)
FireDan50 Track Member Join Date: Mar 2012 Location: San Antonio Posts: 714 Drives: '09 370Z PW M6 Rep Power: 19	Just thought I'd share my install and review of Robispec's bar. Taking out all the plastic pieces from the trunk to middle of the car (side sills) was a pain in the butt, but putting the bar in was super easy. Robispec's piece fit like a glove and was made very well. You can definitely tell the difference in strength of this bar over the OEM one. The powder coating was awesome and I would totally recommend this bar to anyone. dainedazz, Unique_Z, GaleForce and 2 others like this.

12-23-2012, 09:31 AM	#30 (permalink)
FireDan50 Track Member Join Date: Mar 2012 Location: San Antonio Posts: 714 Drives: '09 370Z PW M6 Rep Power: 19	DO NOT get these Planted seat brackets....they are not straight/level and make the seats tilted making you have to do some modification/fabrication for seats to look right. GaleForce likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Robispec Chassis/Harness Bar	ZInferno0248	Brakes & Suspension	105	08-30-2013 11:07 AM
New harness for aftermarket install	bigaudiofanat	Audio & Video	18	09-11-2011 11:58 AM

09-12-2012, 11:29 AM	#18 (permalink)
sweetazzz16 Base Member Join Date: Oct 2010 Location: North Carolina Posts: 16 Drives: 2010 370z PG M6 Rep Power: 15	I was wondering how much this harness bar is. Just started researching everything that goes into a racing seat setup with a 4 point harness. I want to do things correctly so a harness bar is what i want to start with. How much for the bar? (I have tried calling robi spec and can't get a hold of them so i will keep trying)

09-12-2012, 11:58 AM	#19 (permalink)
FireDan50 Track Member Join Date: Mar 2012 Location: San Antonio Posts: 714 Drives: '09 370Z PW M6 Rep Power: 19	Email him....thats the fastest way I've found to communicate with them.

09-13-2012, 09:55 AM	#25 (permalink)
TypeOne A True Z Fanatic Join Date: Jul 2010 Location: Baton Rouge, LA Posts: 2,682 Drives: BSM 370 Rep Power: 1851	Looks really cool! I saw these when he made his and thought it was a neat idea.