Robispec Harness Bar Install

Rusty

Hi all. This is for the Robispec Harness Bar Install. Instead of doing a complete detail write on removing the interior panels. Others have all ready done it. So I'm skipping that part. But I'm posting a link to what Dustin@Z1 did. It's an excellent write on it.

Removing the Trunk Interior on a 370Z -> Z1 Motorsports

Attached Images

	001.JPG (228.2 KB, 646 views)
	002.JPG (239.8 KB, 809 views)
	003.JPG (257.5 KB, 1217 views)

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

Rusty

This is the Robispec with the aluminium spacers on the ends. That you will use.

Attached Images

	004.JPG (265.2 KB, 539 views)
	005.JPG (263.2 KB, 311 views)
	006.JPG (273.5 KB, 398 views)

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

cdoxp800

Nice.. I just ordered mine today..

__________________
2011 Brilliant Silver NISMO 370z. #: 0046.
PPE LTH | MillSpec Cats | F.I Exhaust | Akuma Intakes | Rotora 6/4 Brakes

Rusty

Once you have the stock bar out. Put your spacer plates that was on the end of the Robispec harness bar in place on the frame bracket sticking out. The bar and spacer plates ONLY go in one way. They WILL NOT fit the other way. THE ROUNDED PART OF THE SPACER PLATE IS ON TOP! SAME WITH THE BAR! My bar went in tight. Thought for awhile that I might have to use a porti-power to jack the frame apart. Had the bar in backwards. Turned the bar around. And it was still on the tight side. But it went in. I put the driver side spacer in first. Next I put the bar in. Raised up the right side alittle and dropped the that spacer into place. Align the bolt holes, and used the bolts that came with the bar.

Attached Images

	007.JPG (253.6 KB, 336 views)
	008.JPG (259.2 KB, 363 views)
	009.JPG (251.8 KB, 447 views)
	010.JPG (263.3 KB, 802 views)
	011.JPG (247.8 KB, 427 views)

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

Carbon_z

Thats awesome..

__________________

Full Carbon Fiber Nissan 370z "400zTT" Fully Built 4.0L Twin Turbo 1300hp, 1100whp. Follow me on Instagram at http://www.instagram.com/carbonz.

Rusty

Next. In the first picture. PUT THAT PIECE IN FIRST, before the other panels. Other wise you WILL BE CUSSIN"! Then reassemble your interior. Play attention to the clips and screws that you took out the how they fasten. and there you go. All done.

Attached Images

	012.JPG (252.1 KB, 582 views)
	014.JPG (258.6 KB, 791 views)

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

GaleForce

Very nice!

So is this a suitable solution for using racing harnesses now?

__________________

binary0x01

I don't see it on their website, where do you guys order it from?

Btw, how long did the install take?

__________________
Tune (by Seb@SpecialtyZ) -- Upgraded Parts List : When in doubt, use brute force; if it doesn't work, you aren't using enough.

martin82

you can email/call them directly.

c41006

Nice

__________________
The plaque for the alternates is down in the ladies room

binary0x01

Thanks.

__________________
Tune (by Seb@SpecialtyZ) -- Upgraded Parts List : When in doubt, use brute force; if it doesn't work, you aren't using enough.

binary0x01

Do post your feedback btw

__________________
Tune (by Seb@SpecialtyZ) -- Upgraded Parts List : When in doubt, use brute force; if it doesn't work, you aren't using enough.

Rusty

I can do it in about 4 hours now. Since I know how the interior comes apart now.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

Rusty

It's a red bar that's behind the seats. What more can I say. LOL It's stronger then the cheezy stock piece I took out. It has solid mounting to the frame that the stock bar didn't have. And it looks good.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

FireDan50

I just ordered mine today too Do you plan on adding harnesses/seats also? I have Sparco Pro 2000 seats now and just purchased Takata harnesses with snap in mounts linked in the other Robispec chassis/harness bar thread on page 3.